Please help.Nero newbie.invalid block address/SCSI command aborted could not perform end of disc at once.

creaky · Oct 5, 2005

i'll just attack log6 for know....

Nero version: 6.0.0.0
Click to expand...

- 'fraid that's out of the bible, update to latest, 6.6.0.16

Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.08
Click to expand...

- firmware is out of date, 1.22 is here - http://forum.rpc1.org/dl_firmware.php?download_id=2140

Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Click to expand...

- that's ok, that question mark just means the atapi drivers aren't loaded correctly (in your case they are fine) or it means the burner's external or whatever..which we know it is...

Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
Click to expand...

- yup, Nero's too old to recognise your burner

Physical memory : 503MB (515444kB)
Free physical memory: 207MB (212200kB)
Memory in use : 58 %
Click to expand...

- i've quoted this as some of the logs show the free memory dropping too low. make sure you close down more programs prior to every burn.

Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2285983 (507:59.58)
Click to expand...

- that sounds a tad too close to the outer edge of discs, just gonna go and check something...

edit- yup, see this example - the "(507:59.58)" means you're burning to outer edge of discs, when you update Nero this paragraph is more legible as it's shown in Megabytes, see this example -

Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
Click to expand...

- 4465MB is far too close to outer edge of discs. If you used DVD Shrink, set target size to 4300MB in Shrink's preferences, thus avoiding outer edge and not sacrificing much space.

Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
Click to expand...

- presuming they're authentic these G05's are very good discs. I only say that as there as some fake G05's out there... we can worry about that later, let's get all the tweaks done for now..

20:15:21.093 PIONEER DVD-RW DVR-110D : WriteBuffer reduced to 32768 Bytes

SCSI-Layer send CDRERR_BUFFER_TO_BIG to writer

Recorder-Buffer cannot be reduced any more

SCSI command aborted

Queue-Again-Later on FlushSectorCache
Click to expand...

- lots of all these errors thru the log. i'm making a real guess here, but all these errors look suspiciously like the burner isn't getting enough data. i've just checked and your laptop does have USB2; hmmmm, well you need to make various tweaks as i've detailed above but i'm not sure those will solve these errors as out of many thousand logfiles i've not once come across these particular errors. Tell you what, make ALL the changes i've outlined, then run a 'simulation burn' in Nero, which goes thru the motions with a blank disc but doesn't wwrite to it, and generates a juicy section of logfile. Paste that here and we'll go from there....

Burn process failed at 4x (5,520 KB/s)
Click to expand...

- splat!

kwamesead · Oct 17, 2005

Hi Creaky.Thanks for your help and support and sorry for the late reply, but I've been very busy. I have yet to make the changes you advised concerning nero/firmware/shrink settings etc. As soon as I have, I will send you a few simulation logs and we can go from there. Thanks again for your help, and I'll speak to you soon. Thanks. kwamesead.

creaky · Oct 17, 2005

no worries, i'll be online, i'm rarely not

creaky · Oct 25, 2005

i've been having the 'invalid block address' this evening on one of my new LG burners. it was mounted internally and reads from discs fine/rips fine, but every time i feed it a Verb TY and try to burn 8x it fails at lead-in with 'invalid block address' (i never do 8x but was seeing what results i'd get at 8x). a 4x write on very same disc was fine. a few times got the same results. as drive is gonna be sent back for swap anyway now as i don't trust it, hooked it up in a USB2 enclosure, same results. the other LG drive lives in a USB2 enclosure, switched that on, and it's been burnig at 8x sweetly all eve. so one burner's faulty and it would appear that i can now burn at the elusive 8x....

...just in case that helps anyone...

Lunchcake · Nov 3, 2005

Been following this thread but I haven't been able to get my DVD burner working yet. I've a Pacific Digital Mach 16 internal; bought an external case and am running a USB2.0 back through to my Dell Inspiron 6000 laptop with 512 Ram. I am using Nero 6.6 and have been getting "Invalid Block Address" when I try to run. Here is the logfile of a simulated burn at 8x. Note that I have also tried another brand of DVDR with poor results, and speed tests suggest that 11.x is the fastest I can run. I have also upgraded the firmware to G7V9. I see online that the DMA may need to be changed... Please provide any help you can!

Log to follow:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <ATAPI DVD DD 2X16X4X16> Version: G7V9 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CDRW/DVD TSL462C>Version: DE01 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDRW/DVD TSL462C atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CDRW/DVD TSL462C D: CDRom0
ATAPI DVD DD 2X16X4X16 E: CDRom4
USB DISK 2.0 H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523644kB)
Free physical memory: 128MB (131772kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.11.2005
ISO compilation
4:43:32 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:43:32 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

4:43:32 PM #3 Text 0 File Writer.cpp, Line 122
Writer ATAPI DVD DD 2X16X4X16 running

4:43:33 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

4:43:33 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

4:43:33 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 597823 (132:50.73, 1167MB)

4:43:33 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

4:43:33 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: ATAPI DVD DD 2X16X4X16, Media type: DVD-R
Disc Manufacturer: MXL RG - 03
Disc Application Code: 64, Disc Physical Code: 193

4:43:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:43:33 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 597824 (597824) = #597824/132:50.74
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 597824 blocks [ATAPI DVD DD 2X16X4X16]
--------------------------------------------------------------

4:43:33 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [ATAPI DVD DD 2X16X4X16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1224343552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
597824 | lead-out | 1 | 0x41 | 0x00

4:43:34 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:43:34 PM #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

4:43:34 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:43:34 PM #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11,080 KB/s)

4:43:44 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:43:44 PM #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

4:43:44 PM #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Seamless Link -> ON

4:43:44 PM #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

4:43:44 PM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:44:48 PM #21 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B080000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x02 0x8E 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

4:44:48 PM #22 SCSI -1064 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B5F1400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x02 0x8E 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x21 0x02

4:44:48 PM #23 CDR -1064 File Writer.cpp, Line 311
Invalid block address

4:44:48 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:44:48 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:44:48 PM #26 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 167519

4:45:04 PM #27 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

creaky · Nov 3, 2005

@Lunchcake - to fix DMA, try this - http://home.comcast.net/~bbmayo/FAQ.htm

and try 4x.

Lunchcake · Nov 4, 2005

Thanks. I've changed the settings following the FAQ; I'll give it a whirl at 4x. I am wondering if I have the jumpers set correctly, too. The DVDR is set as slave, and the cabling I used has only 2 connections... I should tackle one problem at a time...

Argh. Failed again. The log is below. At least the DMA is set up correctly. Any suggestions?

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <ATAPI DVD DD 2X16X4X16> Version: G7V9 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CDRW/DVD TSL462C>Version: DE01 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDRW/DVD TSL462C atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CDRW/DVD TSL462C D: CDRom0
ATAPI DVD DD 2X16X4X16 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523644kB)
Free physical memory: 135MB (138620kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.11.2005
ISO compilation
10:48:02 AM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:48:03 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:48:03 AM #3 Text 0 File Writer.cpp, Line 122
Writer ATAPI DVD DD 2X16X4X16 running

10:48:03 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:48:03 AM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:48:03 AM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 643519 (143:00.19, 1256MB)

10:48:03 AM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:48:03 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: ATAPI DVD DD 2X16X4X16, Media type: DVD-R
Disc Manufacturer: MXL RG - 03
Disc Application Code: 64, Disc Physical Code: 193

10:48:03 AM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:48:03 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 643520 (643520) = #643520/143:0.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 643520 blocks [ATAPI DVD DD 2X16X4X16]
--------------------------------------------------------------

10:48:03 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [ATAPI DVD DD 2X16X4X16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1317928960, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
643520 | lead-out | 1 | 0x41 | 0x00

10:48:05 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:48:05 AM #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

10:48:05 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:48:05 AM #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)

10:48:15 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:48:15 AM #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

10:48:15 AM #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Seamless Link -> ON

10:48:15 AM #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

10:48:15 AM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:48:25 AM #21 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B070000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x06 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

10:48:25 AM #22 SCSI -1064 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B5E1400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x06 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x21 0x02

10:48:25 AM #23 CDR -1064 File Writer.cpp, Line 311
Invalid block address

10:48:25 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:48:25 AM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:48:25 AM #26 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1695

10:48:48 AM #27 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

creaky · Nov 4, 2005

@Lunchcake -

cheers - you provided a vital nugget of info there -

The DVDR is set as slave
Click to expand...

- devices in USB enclosures must be set to Master ONLY.... - that could be all that's left to get working again...

Physical memory : 511MB (523644kB)
Free physical memory: 135MB (138620kB)
Memory in use : 73 %
Click to expand...

- still try to improve on the free memory too...

Lunchcake · Nov 4, 2005

Ah, the rub being that now I've set the DVDR to slave, the computer doesn't startup at all - it just goes to the flashing cursor in the upper left hand corner. Is there a place in the bios where I change things and tell the computer what's up? What about cable select?

I also recently installed Nero 7.x to see if that did the trick to no avail. It said: device not available. other notes - SCSIStatus (x00) WinError (121) NeroError (-600).

Thanks.

creaky · Nov 4, 2005

just change jumper to Master (we are talking about the burner in the USB enclosure, yes ??)

Lunchcake · Nov 4, 2005

Whoops - that's what I meant. I set the DVDR in the enclosure from slave to master and got a freeze. Maybe the enclosure is the root of the problem? This is what I am using...
http://www.geeks.com/details.asp?invtid=SY-UEN-5MYS-S&cat=CAS

Thanks.

update: cable select also freezes up the computer.

creaky · Nov 4, 2005

as far as i'm aware devices in USB enclosures must ALWAYS be set to MASTER....

Lunchcake · Nov 4, 2005

Thanks for your help. I am not sure why the DVDR isn't allowing the computer to boot when set as Master. Interestingly, I've an external Maxtor 160GB HD that is set at CS - but without a CS cable, which i think makes it a Master, too. Anyway, that thing works fine. Perhaps it is the Myson chipset in the enclosure. I think I'll stop by OD on the way home and pick up a fancy enclosure - if they have them - and see if it works. Argh.

creaky · Nov 4, 2005

try setting the hrd drive in the other enclosure to Master, multiple enclosures can all be master. that cable select has it's place in certain pc's - but i've never got on with it. i've only ever come across it in 'corporate' type pc's, ie compaq, dell etc, but any of them i've got my hands on i change to normal master/slave arrangement..

Lunchcake · Nov 8, 2005

Again, thanks for your assistance in this thread-stealing escapade. Turns out the Myson chipset sucked it. I scored an expensive enclosure from CC and it worked excellently. Therefore: BenQ 1620 dvdr drives generally don't work with Myson chipsets, which was what was in the Creative I/O enclosure I bought.

On to the next computer problem - Motorola Phone Tools.

Cheers

creaky · Nov 8, 2005

yay, nice one. have fun. ps i'm not into phones but afterdawn has loads of phone forums

kwamesead · Nov 24, 2005

This is message ofr Creaky. I have made all the changes you outlined concerning hardware/ software configurations. Instead of getting invalid block address/ scsi command aborted, I am getting reset occured. This happens even when I am buring audio cds that use little memory. Is there a conflict between my ASPI drivers? As i have updated them and still the same problems. Since I started using this burner computer combo,i GET 2 good burns then a fail.I look foward to your response, and thank you in advance for any support you can give. Kwamesead:

Below is a log for your attention
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c

Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.22 - HA 3 TA 0 - 6.6.0.12
Adapter driver: <> HA 3
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 2 TA 0 - 6.6.0.12
Adapter driver: <imagedrv> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK3021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDRW/DVD CDD5263 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
PHILIPS CDRW/DVD CDD5263 F: CDRom2
NERO IMAGEDRIVE2 D: CDRom0
NERO IMAGEDRIVE2 E: CDRom1
PIONEER DVD-RW DVR-110D G: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 503MB (515444kB)
Free physical memory: 121MB (124744kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.11.2005
UDF/ISO compilation
20:23:15 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

20:23:15 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

20:23:15 #3 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

20:23:15 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

20:23:15 #5 Text 0 File Reader.cpp, Line 127
Reader running

20:23:15 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-110D running

20:23:15 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

20:23:15 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

20:23:15 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

20:23:33 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

20:23:33 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

20:23:33 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

20:23:33 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:23:33 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD-RW DVR-110D]
--------------------------------------------------------------

20:23:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-110D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

20:23:33 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

20:23:33 #17 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

20:23:33 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

20:23:33 #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11,080 KB/s)

20:23:38 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:23:38 #21 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode

20:23:38 #22 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Buffer underrun protection -> ON

20:23:39 #23 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes

20:23:39 #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:23:43 #25 Text 0 File Cdrdrv.cpp, Line 1288
20:23:43.687 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #26 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.093 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #27 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.140 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #28 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.187 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #29 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.234 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #30 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.281 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #31 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.328 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #32 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.375 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #33 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.468 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #34 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.515 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #35 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.562 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #36 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.609 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #37 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.656 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #38 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.703 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #39 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.796 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #40 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.843 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #41 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #42 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:01 #43 Text 0 File Cdrdrv.cpp, Line 1288
20:24:01.984 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #44 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #45 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.125 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #46 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.171 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #47 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.218 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #48 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.265 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #49 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.312 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #50 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.359 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #51 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.453 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #52 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.500 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #53 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.546 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #54 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.593 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #55 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.640 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #56 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.687 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #57 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.781 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #58 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.828 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #59 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.875 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #60 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.921 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:02 #61 Text 0 File Cdrdrv.cpp, Line 1288
20:24:02.968 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #62 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.015 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #63 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.093 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #64 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.140 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #65 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.187 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #66 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.234 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #67 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.281 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #68 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.328 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #69 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.421 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #70 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.468 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #71 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.515 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #72 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.562 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #73 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.609 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #74 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.656 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #75 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.750 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #76 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.796 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #77 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.843 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #78 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #79 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:03 #80 Text 0 File Cdrdrv.cpp, Line 1288
20:24:03.984 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #81 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #82 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.125 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #83 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.171 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #84 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.218 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #85 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.265 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #86 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.312 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #87 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.406 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #88 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.453 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #89 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.500 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #90 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.546 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #91 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.593 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #92 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.640 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #93 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.734 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #94 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.781 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #95 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.828 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #96 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.875 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #97 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.921 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:04 #98 Text 0 File Cdrdrv.cpp, Line 1288
20:24:04.968 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #99 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.062 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #100 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.109 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #101 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.156 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #102 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.203 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #103 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.250 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #104 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.296 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #105 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.390 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #106 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.437 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #107 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.484 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #108 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.531 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #109 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.578 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #110 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.625 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #111 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.703 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #112 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.750 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #113 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.796 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #114 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.843 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #115 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:05 #116 Text 0 File Cdrdrv.cpp, Line 1288
20:24:05.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:06 #117 Text 0 File Cdrdrv.cpp, Line 1288
20:24:06.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:06 #118 Text 0 File Cdrdrv.cpp, Line 1288
20:24:06.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:06 #119 Text 0 File Cdrdrv.cpp, Line 1288
20:24:06.125 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:06 #120 Text 0 File Cdrdrv.cpp, Line 1288
20:24:06.171 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:06 #121 Text 0 File Cdrdrv.cpp, Line 1288
20:24:06.218 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:06 #122 Text 0 File Cdrdrv.cpp, Line 1288
20:24:06.265 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:06 #123 Text 0 File Cdrdrv.cpp, Line 1288
20:24:06.359 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:24:06 #124 Text 0 File Cdrdrv.cpp, Line 1288
20:24:06.406 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:33:17 #125 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD-RW DVR-110D> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

20:33:17 #126 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:33:17 #127 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 2286111

20:33:25 #128 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 02/08/2004 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\imagedrv.sys': Ver=2.27.0.0 built by: WinDDK, size=5504 bytes, created 02/03/2004 17:37:48 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c

Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.22 - HA 3 TA 0 - 6.6.0.12
Adapter driver: <> HA 3
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 2 TA 0 - 6.6.0.12
Adapter driver: <imagedrv> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK3021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDRW/DVD CDD5263 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
PHILIPS CDRW/DVD CDD5263 F: CDRom2
NERO IMAGEDRIVE2 D: CDRom0
NERO IMAGEDRIVE2 E: CDRom1
PIONEER DVD-RW DVR-110D G: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 503MB (515444kB)
Free physical memory: 118MB (121168kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.11.2005
UDF/ISO compilation
20:50:18 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

20:50:18 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

20:50:18 #3 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

20:50:18 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

20:50:18 #5 Text 0 File Reader.cpp, Line 127
Reader running

20:50:18 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-110D running

20:50:18 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

20:50:18 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

20:50:18 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

20:50:18 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

20:50:18 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

20:50:18 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

20:50:18 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:50:18 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD-RW DVR-110D]
--------------------------------------------------------------

20:50:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-110D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

20:50:18 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

20:50:18 #17 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

20:50:18 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

20:50:18 #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11,080 KB/s)

20:50:24 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:50:24 #21 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode

20:50:24 #22 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Buffer underrun protection -> ON

20:50:24 #23 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes

20:50:24 #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:50:29 #25 Text 0 File Cdrdrv.cpp, Line 1288
20:50:29.328 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #26 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.750 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #27 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.796 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #28 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.843 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #29 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #30 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #31 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.984 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #32 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #33 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #34 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.140 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #35 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.203 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #36 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.250 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #37 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.296 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #38 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.343 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #39 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.390 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #40 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.437 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #41 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.484 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #42 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.531 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #43 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.578 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #44 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.625 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #45 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.671 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #46 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.718 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #47 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.843 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #48 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #49 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #50 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.984 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #51 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #52 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #53 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.125 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #54 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.171 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #55 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.218 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #56 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.265 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #57 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.312 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #58 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.359 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #59 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.406 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #60 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.453 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #61 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.500 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #62 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.546 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #63 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.593 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #64 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.640 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #65 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.687 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #66 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.734 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #67 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.781 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #68 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #69 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #70 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.984 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #71 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #72 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #73 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.125 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #74 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.171 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #75 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.218 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #76 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.265 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #77 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.312 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #78 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.359 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #79 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.406 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #80 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.453 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #81 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.500 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #82 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.546 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #83 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.593 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #84 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.640 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #85 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.687 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #86 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.734 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #87 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.781 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #88 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.828 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #89 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.875 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #90 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.953 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #91 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.000 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #92 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.046 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #93 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.093 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #94 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.140 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #95 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.187 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #96 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.234 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #97 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.281 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #98 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.328 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #99 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.375 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #100 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.421 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #101 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.468 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #102 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.515 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #103 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.562 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #104 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.609 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #105 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.656 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #106 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.703 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #107 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.750 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #108 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.796 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #109 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.843 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #110 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #111 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #112 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #113 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #114 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.125 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #115 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.171 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #116 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.218 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #117 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.265 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #118 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.312 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #119 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.359 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #120 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.406 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #121 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.453 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #122 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.500 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #123 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.546 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #124 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.593 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:51:07 #125 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x041D0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x01 0x49 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

20:51:07 #126 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x048C0A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0x49 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x29 0x00

20:51:07 #127 CDR -1114 File Writer.cpp, Line 311
Reset occurred

20:51:07 #128 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:51:07 #129 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

20:51:08 #130 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 84447

20:51:16 #131 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 02/08/2004 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\imagedrv.sys': Ver=2.27.0.0 built by: WinDDK, size=5504 bytes, created 02/03/2004 17:37:48 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c

Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.22 - HA 3 TA 0 - 6.6.0.12
Adapter driver: <> HA 3
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 2 TA 0 - 6.6.0.12
Adapter driver: <imagedrv> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK3021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDRW/DVD CDD5263 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
PHILIPS CDRW/DVD CDD5263 F: CDRom2
NERO IMAGEDRIVE2 D: CDRom0
NERO IMAGEDRIVE2 E: CDRom1
PIONEER DVD-RW DVR-110D G: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 503MB (515444kB)
Free physical memory: 118MB (121168kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.11.2005
UDF/ISO compilation
20:50:18 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

20:50:18 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

20:50:18 #3 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

20:50:18 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

20:50:18 #5 Text 0 File Reader.cpp, Line 127
Reader running

20:50:18 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-110D running

20:50:18 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

20:50:18 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

20:50:18 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

20:50:18 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

20:50:18 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

20:50:18 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

20:50:18 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:50:18 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD-RW DVR-110D]
--------------------------------------------------------------

20:50:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-110D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

20:50:18 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

20:50:18 #17 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

20:50:18 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

20:50:18 #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11,080 KB/s)

20:50:24 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:50:24 #21 Text 0 File DVDR.cpp, Line 2258
Recording mode: Sequential Recording Mode

20:50:24 #22 Text 0 File Mmc.cpp, Line 21356
Set BUFE: Buffer underrun protection -> ON

20:50:24 #23 Text 0 File DVDR.cpp, Line 2412
Start write address at LBA 0
DVD high compatibility mode: Yes

20:50:24 #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:50:29 #25 Text 0 File Cdrdrv.cpp, Line 1288
20:50:29.328 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #26 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.750 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #27 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.796 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #28 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.843 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #29 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #30 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:46 #31 Text 0 File Cdrdrv.cpp, Line 1288
20:50:46.984 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #32 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #33 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #34 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.140 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #35 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.203 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #36 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.250 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #37 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.296 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #38 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.343 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #39 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.390 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #40 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.437 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #41 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.484 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #42 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.531 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #43 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.578 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #44 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.625 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #45 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.671 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #46 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.718 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #47 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.843 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #48 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #49 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:47 #50 Text 0 File Cdrdrv.cpp, Line 1288
20:50:47.984 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #51 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #52 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #53 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.125 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #54 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.171 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #55 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.218 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #56 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.265 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #57 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.312 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #58 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.359 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #59 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.406 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #60 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.453 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #61 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.500 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #62 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.546 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #63 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.593 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #64 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.640 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #65 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.687 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #66 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.734 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #67 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.781 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #68 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #69 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:48 #70 Text 0 File Cdrdrv.cpp, Line 1288
20:50:48.984 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #71 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #72 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #73 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.125 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #74 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.171 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #75 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.218 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #76 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.265 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #77 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.312 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #78 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.359 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #79 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.406 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #80 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.453 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #81 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.500 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #82 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.546 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #83 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.593 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #84 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.640 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #85 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.687 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #86 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.734 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #87 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.781 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #88 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.828 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #89 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.875 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:49 #90 Text 0 File Cdrdrv.cpp, Line 1288
20:50:49.953 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #91 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.000 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #92 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.046 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #93 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.093 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #94 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.140 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #95 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.187 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #96 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.234 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #97 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.281 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #98 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.328 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #99 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.375 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #100 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.421 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #101 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.468 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #102 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.515 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #103 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.562 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #104 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.609 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #105 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.656 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #106 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.703 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #107 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.750 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #108 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.796 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #109 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.843 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #110 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.890 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:50 #111 Text 0 File Cdrdrv.cpp, Line 1288
20:50:50.937 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #112 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.031 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #113 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.078 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #114 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.125 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #115 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.171 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #116 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.218 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #117 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.265 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #118 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.312 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #119 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.359 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #120 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.406 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #121 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.453 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #122 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.500 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #123 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.546 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:50:51 #124 Text 0 File Cdrdrv.cpp, Line 1288
20:50:51.593 - PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later

20:51:07 #125 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x041D0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x01 0x49 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

20:51:07 #126 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x048C0A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0x49 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x29 0x00

20:51:07 #127 CDR -1114 File Writer.cpp, Line 311
Reset occurred

20:51:07 #128 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:51:07 #129 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

20:51:08 #130 Text 0 File DVDR.cpp, Line 2649
EndDAO: Last written address was 84447

20:51:16 #131 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 02/08/2004 02:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\imagedrv.sys': Ver=2.27.0.0 built by: WinDDK, size=5504 bytes, created 02/03/2004 17:37:48 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

kwamesead · Nov 25, 2005

PLEASE HELP!THE ABOVE THREAD IS NOT A MESSAGE FOR CREAKY ONLY!THIS WAS AN ERROR! Any help from anyone would be appreciated, including creaky who responded to my first log that created this thread. I look forward to all responses and thank you in advance for any support you can give.

creaky · Nov 25, 2005

hi, sorry been real busy last couple days..

turns out you got me again anyway

you posted your entire Nero log, no biggies, i pulled out a section and dissected it.. here goes....

Nero Version: 6.6.0.12
Click to expand...

- not too bad, 6.6.0.18 is latest 6.x version, however your burner isn't detected, see comment after next comment

Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.22
Click to expand...

- firmware's still current, just checked, no newer version out yet

Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
Click to expand...

- yup, Nero's too old to recognise your burner, update to 6.6.0.18 from here - (just Update package 1) - http://www.nero.com/nero6/eng/nero-up.php

DiskPeripheral : TOSHIBA MK3021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDRW/DVD CDD5263 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : Nero IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : Nero IMAGEDRIVE2 2.26 imagedrv Port 2 ID 1 DMA: Off
Click to expand...

- DMA needs to be ON for that Philips drive, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm

Physical memory : 503MB (515444kB)
Free physical memory: 118MB (121168kB)
Memory in use : 76 %
Click to expand...

- i've quoted this as some of the logs show the free memory dropping too low. make sure you close down more programs prior to every burn.

Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
Click to expand...

- 4465MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space

Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
Click to expand...

- very nice discs..

PIONEER DVD-RW DVR-110D\H3 T0 : Queue again later
Click to expand...

- these messages are fine, Pioneer drives do this, dunno why, but it's ok..

Reset occurred
Click to expand...

- splat!, this is hopefully just due to all the other problems...

Simulation failed at 8x (11,080 KB/s)
Click to expand...

- try 4x

Existing drivers:
Click to expand...

- the ATAPI drivers are supposed to be listed in this section, this will be sorted by following the DMA fix further up the reply..

Log in or Sign up

Please help.Nero newbie.invalid block address/SCSI command aborted could not perform end of disc at once.

creaky Moderator Staff Member

kwamesead Member

creaky Moderator Staff Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

kwamesead Member

kwamesead Member

creaky Moderator Staff Member

Share This Page

Log in or Sign up

Please help.Nero newbie.invalid block address/SCSI command aborted could not perform end of disc at once.

creaky Moderator Staff Member

kwamesead Member

creaky Moderator Staff Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

Lunchcake Member

creaky Moderator Staff Member

kwamesead Member

kwamesead Member

creaky Moderator Staff Member

Share This Page

Useful Searches