Problem burning with Nero to my USB connected LG writer

Discussion in 'Nero discussion' started by feromone, Oct 6, 2005.

Page 1 of 2
  1. feromone

    feromone Guest

    I have major problems burning with Nero (and DVDShrink). I have a LG 4163-B DVD writer connected by USB to my HP ze5300 laptop which will not allow me to burn copies of DVD movies. I can do data disks okay.

    I thought it was a problem with either the ASPI file or the firmware for the DVD unit - as suggested on this site. The real problems started after I put new firmware into the LG writer and loaded the updated ASPI file into the PC. The Toshiba SD-R2132 DVD-Rom on my laptop now no longer recognises CDs or DVDs. XP says there is no problem.

    Tried to roll back to a previous driver, but that didn't work - it asked me to find one on the system or a CD - I don't have the driver as a backup anywhere, not even on the system disks. I went to the Toshiba site to see if they had a driver for the unit on my laptop and I couldn't find one (it's a SD-R2312).

    As for burning DVD movies on the LG, every time it comes to burning the log window says "SCSI command aborted" and stops after 1%. I've ruined several DVD-R's this way.

    My problems are:
    1. How do I get my laptop's DVD-Rom back up and running properly?
    2. How do I solve the problem of burning to the LG writer?

    Is it a.) a software problem b.) a hardware problem, c.) both.??

    Can anybody help pls? I'm losing my rag! :-[
     
    feromone, Oct 6, 2005
    #1
  2. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    hi. i may very well buy this very same burner this week, to house in my Belkin USB2 enclosure. i've been umming and ahhing over this for ages as i read too many bad things about USB burning but my enclosures work brilliantly for ALL my ripping as i have a CD Burner/DVD-Rom combo drive in one of the Belkins and it works perfectly for ripping and burning CD's.

    Even if i don't buy one i'll have a look into your problem...
     
    creaky, Oct 9, 2005
    #2
  3. feromone

    feromone Guest

    Thanks, :eek:) a friend suggested updating the USB drivers - but it's a Via Rev 5 Universal Host Companion Controller and there's no updated driver available. Maybe reinstalling might do something??
     
    feromone, Oct 10, 2005
    #3
  4. feromone

    feromone Guest

    OK! Got the Toshiba DVD up and working again, so that's one part of the problem solved. Found the driver for it on my PC in the Windows directory.

    Still not solved LG burning problem.

     
    feromone, Oct 11, 2005
    #4
  5. feromone

    feromone Guest

    hellooooooooo... can anyone help or offer suggestion?
     
    feromone, Oct 20, 2005
    #5
  6. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    right. i have another LG 4167B on order so tomorrow it'll be in my USB2 enclosure this time tomorrow but i'm confident it'll be fine in the enclosure. i have an LG dvd-rom/cd writer combo drive housed in my other USB2 enclosure and that's ripped like 2000 movies while living in said enclosure.

    what burning program you using ?, and have yout got USB2 ? as USB1 won't cut it from what i remember
     
    creaky, Oct 20, 2005
    #6
  7. feromone

    feromone Guest

    Yeah, using a HP Pavilion laptop 5350 series - 512Mb of memory, 2.80 Ghz pentium IV. Using Nero 6.3.1.6.

    It's funny you should mention it, but I have two USB 2.0 ports on the back, and a USB port for the mouse. However... once or twice when it failed to burn it said the device would not work as it wasn't plugged into a hi-speed port.

    I've always used the USB 2.0 ports at the back, so why would this happen? It's F&(cked! PCs are moody b**stards. If it would help you I can try burning again and then post the log here.
     
    feromone, Oct 22, 2005
    #7
  8. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    yup, logfile would be good. i ended up having a 4163B delivered instead of the 4167B but that's a great drive and it's in my USB2 enclosure; it's now done quite a few rips and also quite a few faultless burns so far via the 4163B thru USB2...
     
    Last edited: Oct 22, 2005
    creaky, Oct 22, 2005
    #8
  9. feromone

    feromone Guest

    Okay, the log file for Nero is below. Hope this helps cos' I just keep ruining DVDs... :(

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
    Nero version: 6.3.1.6
    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 2 TA 0 - 6.3.1.6
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <TOSHIBA DVD-ROM SD-R2312>Version: 1905 - HA 1 TA 0 - 6.3.1.6
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC25N040ATCS04-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-R2312 D: CDRom0
    HL-DT-ST DVDRAM GSA-4163 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 66060288 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 446MB (457712kB)
    Free physical memory: 122MB (125740kB)
    Memory in use : 72 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.10.2005
    UDF/ISO compilation
    18:28:28 #1 Phase 112 File dlgbrnst.cpp, Line 1841
    DVD-Video files reallocation started

    18:28:28 #2 Phase 114 File dlgbrnst.cpp, Line 1841
    DVD-Video files reallocation completed (no file modified)

    18:28:28 #3 Text 0 File Isodoc.cpp, Line 6062
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    18:28:28 #4 Phase 111 File dlgbrnst.cpp, Line 1841
    DVD-Video files sorted

    18:28:28 #5 Text 0 File Reader.cpp, Line 118
    Reader running

    18:28:28 #6 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRAM GSA-4163B running

    18:28:28 #7 ISO9660GEN -11 File geniso.cpp, Line 3898
    First writeable address = 0 (0x00000000)

    18:28:28 #8 ISO9660GEN -11 File geniso.cpp, Line 3898
    First writeable address = 0 (0x00000000)

    18:28:29 #9 Text 0 File Burncd.cpp, Line 3198
    Turn on Disc-at-once, using DVD media

    18:28:29 #10 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2202143 (489:21.68, 4301MB)

    18:28:29 #11 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    18:28:29 #12 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
    Disc Manufacturer: MCC 02 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    18:28:29 #13 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    18:28:29 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    18:28:29 #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2202144 | lead-out | 1 | 0x00 | 0x41

    18:28:29 #16 Phase 24 File dlgbrnst.cpp, Line 1841
    Caching of files started

    18:28:29 #17 Text 0 File Burncd.cpp, Line 4214
    Cache writing successful.

    18:28:29 #18 Phase 25 File dlgbrnst.cpp, Line 1841
    Caching of files completed

    18:28:29 #19 Phase 36 File dlgbrnst.cpp, Line 1841
    Burn process started at 4x (5,520 KB/s)

    18:28:29 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    18:28:30 #21 Text 0 File dlgbrnst.cpp, Line 1699
    Set remaining time: 13:39,960 (819960ms) -> OK

    18:28:30 #22 Text 0 File DVDR.cpp, Line 1619
    Recording mode: Sequential Recording Mode

    18:28:30 #23 Text 0 File Mmc.cpp, Line 19864
    Set BUFE: supported -> ON

    18:28:30 #24 Text 0 File DVDR.cpp, Line 1760
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    18:28:30 #25 Text 0 File Cdrdrv.cpp, Line 8002
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    18:28:49 #26 SCSI -500 File Cdrdrv.cpp, Line 1437
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03AB0000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    18:28:49 #27 CDR -500 File Writer.cpp, Line 304
    SCSI command aborted
    HL-DT-ST DVDRAM GSA-4163B\H2 T0

    18:28:50 #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    18:28:50 #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    18:28:50 #30 Text 0 File DVDR.cpp, Line 1970
    EndDAO: Last written address was -1

    18:28:50 #31 Text 0 File dlgbrnst.cpp, Line 1699
    Set remaining time: 0:00,000 (0ms) -> OK

    18:28:50 #32 Text 0 File dlgbrnst.cpp, Line 1699
    Set remaining time: 0:00,000 (0ms) -> OK

    18:28:50 #33 Phase 38 File dlgbrnst.cpp, Line 1841
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 17/12/2002 12:32:46
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 18/03/2005 22:49:39 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 04:27:50 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    feromone, Oct 26, 2005
    #9
  10. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    - Nero's too old, update (free) to latest 6.x version - 6.6.0.16. get 'Update-Package 1' from here - http://www.nero.com/nero6/en/nero-up.php

    - firmware is one version out of date, A105 is here - http://forum.rpc1.org/dl_firmware.php?download_id=1973

    - yup, Nero's too old to recognise your burner

    - try to close down more programs to ensure sufficient free memory prior to all burning

    - get rid of Roxio, plus to fully remove it you may need to google search for 'Roxio Zapper'
     
    Last edited: Oct 26, 2005
    creaky, Oct 26, 2005
    #10
  11. feromone

    feromone Guest

    Update: Tried my burner to make a data disc last night, and it didn't work - thanks for the tip on Nero, going to update and see how it works.

    The firmware update you mentioned is for Windows ME according to LG updates.

    What's the problem with Roxio? I can remove it, but I didn't realise it was causing a problem.

    As for the memory, are you saying shut down in Task Manager? (I don't run a lot of programs concurrently.)

    Cheers for your help
     
    feromone, Oct 27, 2005
    #11
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    creaky, Oct 27, 2005
    #12
  13. ireland

    ireland Active member

    Joined:
    Nov 28, 2002
    Messages:
    3,451
    Likes Received:
    15
    Trophy Points:
    68
    just a tip,i had problems with burning dvd with my laptop with my external burner..
    how i solved the problem i went and got a Adaptec AUA-1420 USB 2.0 2 Port Card and had not a problem burning again..

     
    ireland, Oct 27, 2005
    #13
  14. feromone

    feromone Guest

    Updated the Nero Burning as suggested. Had minimal success so far. Now I seem to have a different error msg.

    It now says "illegal disc" when it fails to burn - been trying to break it in slowly by burning data discs. Hit rate to date is "ruined 5 - burned 1". Wow.

    Memory is still allocating a lot to programs which aren't running - how can I stop this apart from going into task manager and shutting them down (which basically says that shutting them down can affect system stability)?

    Think the idea of a USB 2.0 card is something, but b4 I purchase (and waste more money - which this LG burner is feeling like £80 down the gurgler) can you give me more details on why this would work?

    Just to be a completist, here's the log from one of the "illegal disc" failures... Thanx.

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 2 TA 0 - 6.6.0.16
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TOSHIBA DVD-ROM SD-R2312>Version: 1905 - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC25N040ATCS04-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-R2312 D: CDRom0
    HL-DT-ST DVDRAM GSA-4163B E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 66060288 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 446MB (457712kB)
    Free physical memory: 110MB (113064kB)
    Memory in use : 75 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    28.10.2005
    ISO compilation
    20:14:10 #1 Text 0 File Isodoc.cpp, Line 6356
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    20:14:10 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    20:14:10 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4163B running

    20:14:10 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    20:14:10 #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    20:14:11 #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2201455 (489:12.55, 4299MB)

    20:14:11 #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    20:14:11 #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
    Disc Manufacturer: MCC 02 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    20:14:11 #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    20:14:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2201456 (2201456) = #2201456/489:12.56
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2201456 blocks [HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    20:14:11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4508581888, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2201456 | lead-out | 1 | 0x41 | 0x00

    20:14:11 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    20:14:11 #13 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    20:14:11 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    20:14:11 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11,080 KB/s)

    20:14:11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:14:12 #17 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    20:14:12 #18 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    20:14:12 #19 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    20:14:12 #20 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    20:14:44 #21 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04270000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    20:14:44 #22 SCSI -1046 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04AF1400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
    0x2A 0x00 0x00 0x0C 0x30 0x05

    20:14:44 #23 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    20:14:44 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    20:14:45 #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    20:14:45 #26 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was -1

    20:14:45 #27 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 17/12/2002 12:32:46
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 18/03/2005 22:49:39 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 04:27:50 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    feromone, Oct 28, 2005
    #14
  15. gzaloam

    gzaloam Guest

    I´ll apreciate if anyone can help me.

    I recently bought a Zynet Enclosure (cd-r3-u2) and a LG 4167b dvd burner. The only issue i have is that if i try to burn a cd-r using the disc-at-once method, it fails in the "lead-in" step. I´d tried using several brands of media, and won´t work. Actually, i can burn cd-r's with track-at-once. I´m using Nero 6.6.0.16. Here's the log.


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 18:35:34
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL12 - HA 3 TA 1 - 6.6.0.16
    Adapter driver: <> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.16
    Adapter driver: <a347scsi> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG MP0603H atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST RW/DVD GCC-4241N atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST RW/DVD GCC-4241N I: CDRom0
    AXV CD/DVD-ROM J: CDRom1
    HL-DT-ST DVDRAM GSA-4167B K: CDRom8
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 638MB (654320kB)
    Free physical memory: 258MB (264360kB)
    Memory in use : 59 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    15.11.2005
    CD Image
    15:54:46 #1 Text 0 File Burncd.cpp, Line 2948
    HL-DT-ST DVDRAM GSA-4167B
    Buffer underrun protection activated

    15:54:46 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:54:46 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4167B running

    15:54:46 #4 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using CD-R/RW media

    15:54:46 #5 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 76985 ( 17:08.35)

    15:54:46 #6 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO

    15:54:46 #7 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVDRAM GSA-4167B;
    CDRW code: 00 97 22 60; OSJ entry from: Daxon Technology, Inc.
    ATIP Data:
    Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
    Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    15:54:46 #8 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:54:46 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 76986 (76986) = #76986/17:6.36
    relocatable, disc pos for caching/writing not required/not required, patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 76986 blocks [HL-DT-ST DVDRAM GSA-4167B]
    --------------------------------------------------------------

    15:54:46 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 157974528, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    76986 | lead-out | 1 | 0x41 | 0x00

    15:54:46 #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    15:54:46 #12 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    15:54:46 #13 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    15:54:47 #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (600 KB/s)

    15:54:47 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

    15:54:47 #16 Text 0 File Mmc.cpp, Line 16924
    StartDAO : CD-Text - Off

    15:54:47 #17 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    15:54:47 #18 Text 0 File Mmc.cpp, Line 17211
    CueData, Len=32
    41 00 00 14 00 00 00 00
    41 01 00 10 00 00 00 00
    41 01 01 10 00 00 02 00
    41 aa 01 14 00 11 08 24

    15:54:51 #19 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x04B30000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    15:54:51 #20 SCSI -1114 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x04000200
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
    0x00 0x00 0x00 0x90 0x29 0x00

    15:54:51 #21 CDR -1114 File Writer.cpp, Line 311
    Reset occurred

    15:54:51 #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    15:54:52 #23 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    15:54:52 #24 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (600 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=6.1.1.17 , size=24698 bytes, created 7/17/2003 00:19:56
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    I also tried using Roxio 6 and Alcohol 120%, but it doesn't work either.
     
    gzaloam, Nov 15, 2005
    #15
  16. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @feromone - slightly late replying to this one.....who changed the calendar to November!

    - get updated to A105, i've been using that for a while now myself. try navigating from here - http://www.lge.com/support/software_gcsc.jsp - i can never find a direct link, but a few clicks from there and you'll find it...

    - as your burner is external to the PC that question mark is fine

    - try to close down more programs to ensure sufficient free memory prior to all burning

    - very nice discs

    - follow ALL suggestions

    - try 4x. my 4167B won't do 8x, whether mounted internally or in one of my USB2.0 enclosures. however my 4163B nearly always does 8x fine (i prefer to do 4x but have been experimenting with 8x on the 4163B which lives in my other USB2.0 enclosure)

    -

    CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.microadvantage.net/utilities



    @gzaloam -

    - firmware is up to date. see my comments in feromone's logfile reply. my 4167B in my opinion, is nowhere near as good as the 4163B, hopefully it will become a better drive with future firmware releases. mine always fails at the lead-in stage when i do 8x

    - as your burner is external to the PC that question mark is fine

    - if nothing else works maybe try different media, but first try mounting the burner internally if you can, to try to rule out the USB enclosure.

    - see other suggestions

    -

    CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need

    to fully remove using Roxio Zapper - http://www.microadvantage.net/utilities
     
    creaky, Nov 16, 2005
    #16
  17. gzaloam

    gzaloam Guest

    i've tried everything and it's still failling, the chipset is Genesys GL 811, How good is it? The only enclosures I seem to find in Mexico are zynet, cosmos and bytecc. The Bytecc comes in two models, one with firewire alone and the other is combo, Do the both of them have the oxford 911, how good is this chip?. Finally, will the enclosure work if i use a 6pin-4pin firewire cable?

    Thanks.
     
    gzaloam, Nov 17, 2005
    #17
  18. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    try mounting the burner internally if you can, to try to rule out the USB enclosure.
     
    creaky, Nov 18, 2005
    #18
  19. goterps7

    goterps7 Member

    Joined:
    Mar 21, 2005
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    Creaky, maybe you can help me too. My external is a Plextor 716A. It used to work fine before my hard drive crashed. But all three of my attempts since have no worked to burn DVD-Rs. I have a brand new hard drive and had to reinstall all my burning software.

    Here's my log file:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <PLEXTOR DVDR PX-716A> Version: 1.03 - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <> HA 1
    Drive buffer : 8192kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PLEXTOR DVDR PX-716A >Version: 1.03 - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TEAC DW-224E atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    PLEXTOR DVDR PX-716A E: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 66060288 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 446MB (457712kB)
    Free physical memory: 55MB (56344kB)
    Memory in use : 87 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    15.11.2005
    ISO compilation
    8:28:12 AM #1 Text 0 File Isodoc.cpp, Line 6356
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    8:28:12 AM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    8:28:12 AM #3 Text 0 File Writer.cpp, Line 122
    Writer PLEXTOR DVDR PX-716A running

    8:28:12 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    8:28:12 AM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    8:28:13 AM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1941679 (431:29.04, 3792MB)

    8:28:13 AM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    8:28:13 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
    Disc Manufacturer: TYG02 -
    Disc Application Code: 64, Disc Physical Code: 193

    8:28:13 AM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:28:13 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1941680 (1941680) = #1941680/431:29.5
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1941680 blocks [PLEXTOR DVDR PX-716A]
    --------------------------------------------------------------

    8:28:17 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3976560640, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1941680 | lead-out | 1 | 0x41 | 0x00

    8:28:17 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    8:28:18 AM #13 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    8:28:18 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    8:28:18 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11,080 KB/s)

    8:28:18 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:28:18 AM #17 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode for Multisession

    8:28:18 AM #18 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: BURN-Proof -> ON

    8:28:18 AM #19 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:28:18 AM #20 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:28:26 AM #21 Text 0 File Cdrdrv.cpp, Line 1286
    08:28:26.105 - PLEXTOR DVDR PX-716A\H1 T0 : Queue again later

    8:28:40 AM #22 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038F4A00
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    8:28:50 AM #23 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03FC0000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    8:28:59 AM #24 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x048C0C00
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    8:28:59 AM #25 Text 0 File Mmc.cpp, Line 19340
    Writer-Buffer for PLEXTOR DVDR PX-716A\H1 T0 reduced to 32768Bytes

    8:29:08 AM #26 SCSI -1114 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038F6000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x29 0x00

    8:29:08 AM #27 CDR -500 File Writer.cpp, Line 311
    SCSI command aborted
    PLEXTOR DVDR PX-716A\H1 T0

    8:29:08 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:29:08 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    8:29:09 AM #30 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 31

    8:29:23 AM #31 Phase 133 File dlgbrnst.cpp, Line 1832
    Writing short lead-out

    8:29:23 AM #32 CDR -1033 File WriterStatus.cpp, Line 167
    Drive not ready
    PLEXTOR DVDR PX-716A\H1 T0

    8:29:23 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    8:29:23 AM #34 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 9/14/2005 2:17:44 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    goterps7, Nov 19, 2005
    #19
  20. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @goterps7 -

    - firmware's up to date

    - as your burner is external to the PC that question mark is fine

    - free memory is too low, well virtually non-existant, make sure to close down more programs prior to dvd work/burning to free up more memory

    - are you sure these are genuine TY media ?

    - reduce burn speed

    - see previous comment, try 4x

    - InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
     
    creaky, Nov 19, 2005
    #20
Page 1 of 2

Share This Page