When attempting to burn a .nrg file (size 3GB) to dvd i received the error below. So far I have been unable to burn anything to dvd since I purchased a Samsung H552U DVD dual layer writer. Please can anyone suggest anything that I can try to correct this issue. Thanks 21:54:00 #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 21:54:01 #12 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 21:54:01 #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 21:54:01 #14 Phase 28 File dlgbrnst.cpp, Line 1832 Speed measurement started 21:54:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 21:55:54 #16 Text 0 File WriterStatus.cpp, Line 116 <TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1497824 (16DAE0h), lenght 0 blocks 21:55:54 #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:55:54 #18 Phase 29 File dlgbrnst.cpp, Line 1781 Speed measurement completed: 19.4x (26,810 KB/s) 21:55:54 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (22,160 KB/s) 21:55:54 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 21:55:54 #21 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 21:55:54 #22 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 21:55:54 #23 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 21:55:54 #24 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:56:05 #25 Text 0 File Cdrdrv.cpp, Line 1286 21:56:05.680 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later 21:57:23 #26 SCSI -1135 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04100000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x03 0xE4 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 21:57:23 #27 CDR -1135 File Writer.cpp, Line 311 Write error 21:57:23 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:57:23 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:57:23 #30 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 254975 21:57:23 #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
please post full log, you are missing half but here is what i see so far 21:57:23 #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) slow it down, burn at 4x peace
Thanks for the suggestion. Just tried it at x4 and it worked fine. Do you reckon that all of my DVD burning will have to be at this speed (the drive & media max is x16)?
i burn video dvds at 4x all the time, but data i burn at 8x 21:57:23 #27 CDR -1135 File Writer.cpp, Line 311 Write error its possible you need a firmware upgrade go here for firmware upgrades - http://forum.rpc1.org/dl_firmware.php?download_id=2011 peace
Guys, here is the full log. Thanks for all your help so far - i'll also check for a firmware upgrade. 1A23-3072-8045-7509-9605-6424 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero API version: 6.6.0.16 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 16b Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552U E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 59MB (60720kB) Memory in use : 76 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.9.2005 NeroAPI 19:05:26 #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 19:05:26 #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 19:05:26 #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 19:05:27 #4 Text 0 File Reader.cpp, Line 127 Reader running 19:05:27 #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 19:05:27 #6 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 19:05:27 #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 19:05:28 #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 19:05:28 #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 19:05:58 #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 404127 ( 89:48.27, 789MB) 19:05:58 #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 19:05:58 #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 19:05:58 #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 19:05:58 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 404128 (404128) = #404128/89:48.28 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 404128 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 19:05:58 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 827654144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 404128 | lead-out | 1 | 0x41 | 0x00 19:05:58 #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 19:05:58 #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 19:05:58 #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 19:05:58 #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 16x (22,160 KB/s) 19:05:58 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 19:05:58 #21 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 19:05:58 #22 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 19:05:58 #23 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 19:05:58 #24 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:06:16 #25 Text 0 File Cdrdrv.cpp, Line 1286 19:06:16.887 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later 19:07:39 #26 Text 0 File WriterStatus.cpp, Line 116 <TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 404128 (62AA0h), lenght 0 blocks 19:07:39 #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 19:07:39 #28 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 404127 19:08:03 #29 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 16x (22,160 KB/s) 19:08:04 #30 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 19:08:04 #31 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1A23-3072-8045-7509-9605-6424 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero API version: 6.6.0.16 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 16b Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552U E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 71MB (73200kB) Memory in use : 72 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.9.2005 NeroAPI 21:30:14 #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 21:30:14 #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 21:30:14 #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 21:30:18 #4 Text 0 File Reader.cpp, Line 127 Reader running 21:30:18 #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 21:30:18 #6 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 21:30:18 #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 21:30:19 #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 21:30:19 #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 21:31:27 #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1241871 (275:58.21, 2425MB) 21:31:27 #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 21:31:27 #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 21:31:27 #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 21:31:27 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1241872 (1241872) = #1241872/275:58.22 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1241872 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 21:31:27 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2543353856, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1241872 | lead-out | 1 | 0x41 | 0x00 21:31:28 #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 21:31:28 #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 21:31:28 #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 21:31:28 #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 16x (22,160 KB/s) 21:31:28 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:31:28 #21 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 21:31:28 #22 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 21:31:28 #23 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 21:31:28 #24 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:31:41 #25 Text 0 File Cdrdrv.cpp, Line 1286 21:31:41.362 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later 21:35:10 #26 Text 0 File WriterStatus.cpp, Line 116 <TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1241872 (12F310h), lenght 0 blocks 21:35:10 #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:35:10 #28 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 1241871 21:35:18 #29 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 16x (22,160 KB/s) 21:35:19 #30 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 21:35:19 #31 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Mark 1A23-3072-8045-7509-9605-6424 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552U E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 76MB (78196kB) Memory in use : 70 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.9.2005 ISO compilation 21:33:40 #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 21:33:42 #2 Text 0 File Reader.cpp, Line 127 Reader running 21:33:42 #3 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 21:33:42 #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 21:33:42 #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 21:33:42 #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1854543 (412:07.18, 3622MB) 21:33:42 #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 21:33:43 #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 21:33:43 #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:33:43 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1854544 (1854544) = #1854544/412:7.19 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1854544 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 21:33:43 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3798106112, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1854544 | lead-out | 1 | 0x41 | 0x00 21:33:43 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 21:33:44 #13 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 21:33:44 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 21:33:44 #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (22,160 KB/s) 21:33:44 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:33:44 #17 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 21:33:44 #18 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 21:33:44 #19 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 21:33:44 #20 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:34:02 #21 Text 0 File Cdrdrv.cpp, Line 1286 21:34:02.965 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later 21:35:34 #22 SCSI -1135 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03320000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x06 0x1A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 21:35:34 #23 CDR -1135 File Writer.cpp, Line 311 Write error 21:35:34 #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:35:43 #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:35:44 #26 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 400063 21:35:44 #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Mark 1A23-3072-8045-7509-9605-6424 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552U E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 78MB (80780kB) Memory in use : 69 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.10.2005 CD-ROM (ISO) 07:04:38 #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 07:04:38 #2 Text 0 File Burncd.cpp, Line 2948 TSSTcorp CD/DVDW TS-H552U Super Link activated 07:04:38 #3 Text 0 File Reader.cpp, Line 127 Reader running 07:04:38 #4 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 07:04:38 #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 07:04:38 #6 Text 0 File Burncd.cpp, Line 3233 Turn on Track-At-Once, using CD-R/RW media 07:05:00 #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 275390 ( 61:13.65) 07:05:00 #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 07:05:00 #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW TS-H552U; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 07:05:00 #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) 07:05:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 275391 (275391) = #275391/61:11.66 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 275389 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 07:05:00 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 564307968, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 275391 | lead-out | 1 | 0x41 | 0x00 07:05:00 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 275391 -> 275389. 07:05:00 #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 07:05:01 #15 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 07:05:01 #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 07:05:01 #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 40x (6,000 KB/s) 07:05:01 #18 SCSI -1189 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038B5A00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x02 07:05:01 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 07:05:01 #20 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 07:07:09 #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 07:07:12 #22 Text 0 File Mmc.cpp, Line 16352 <TSSTcorpCD/DVDW TS-H552U> start Close Session 07:07:29 #23 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 40x (6,000 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Mark 1A23-3072-8045-7509-9605-6424 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552U E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 82MB (84460kB) Memory in use : 67 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.10.2005 Burn DVD Image 21:54:00 #1 Text 0 File Reader.cpp, Line 127 Reader running 21:54:00 #2 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 21:54:00 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 3067850752 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=332:50.74 ( 1497824) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <F:\xbox\Gta San Andreas by N-Gage.nrg> 21:54:00 #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 21:54:00 #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1497823 (332:50.73, 2925MB) 21:54:00 #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 21:54:00 #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 21:54:00 #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:54:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 1497824 (1497824) = #1497824/332:50.74 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1497824 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 21:54:00 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3067543552, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1497824 | lead-out | 1 | 0x41 | 0x00 21:54:00 #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 21:54:01 #12 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 21:54:01 #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 21:54:01 #14 Phase 28 File dlgbrnst.cpp, Line 1832 Speed measurement started 21:54:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 21:55:54 #16 Text 0 File WriterStatus.cpp, Line 116 <TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1497824 (16DAE0h), lenght 0 blocks 21:55:54 #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:55:54 #18 Phase 29 File dlgbrnst.cpp, Line 1781 Speed measurement completed: 19.4x (26,810 KB/s) 21:55:54 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (22,160 KB/s) 21:55:54 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 21:55:54 #21 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 21:55:54 #22 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 21:55:54 #23 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 21:55:54 #24 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:56:05 #25 Text 0 File Cdrdrv.cpp, Line 1286 21:56:05.680 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later 21:57:23 #26 SCSI -1135 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04100000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x03 0xE4 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 21:57:23 #27 CDR -1135 File Writer.cpp, Line 311 Write error 21:57:23 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:57:23 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:57:23 #30 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 254975 21:57:23 #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Mark 1A23-3072-8045-7509-9605-6424 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552U E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 68MB (70184kB) Memory in use : 73 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.10.2005 Burn DVD Image 22:44:28 #1 Text 0 File Reader.cpp, Line 127 Reader running 22:44:28 #2 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 22:44:28 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 3067850752 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=332:50.74 ( 1497824) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <F:\xbox\Gta San Andreas by N-Gage.nrg> 22:44:28 #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 22:44:29 #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1497823 (332:50.73, 2925MB) 22:44:29 #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 22:44:29 #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 22:44:29 #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 22:44:29 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 1497824 (1497824) = #1497824/332:50.74 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1497824 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 22:44:29 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3067543552, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1497824 | lead-out | 1 | 0x41 | 0x00 22:44:29 #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 22:44:29 #12 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 22:44:29 #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 22:44:29 #14 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 22:44:29 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 22:44:29 #16 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 22:44:29 #17 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 22:44:29 #18 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 22:44:29 #19 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 22:44:40 #20 Text 0 File Cdrdrv.cpp, Line 1286 22:44:40.952 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later 22:49:55 #21 Text 0 File WriterStatus.cpp, Line 116 <TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1497824 (16DAE0h), lenght 0 blocks 22:49:55 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 22:49:55 #23 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 1497823 22:50:09 #24 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 firmware is out of date USO6 is newest get new firmware here - http://forum.rpc1.org/dl_firmware.php?download_id=2011 the firmware may help your high speed burns, but another thing to look at is your media, quality media is a must try taiyo yuden, verbatim, sony brands peace
