So I've searched on others' problems on this, but it seems that it really depends on the situation and log as each situation seems to be quite independent from each other. Please help to as why the burn process fails right away on (or right after) the lead-in. log file as follows: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero version: 6.3.1.17 Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: Off CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040 D: CDRom0 Generic DVD-ROM E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047532kB) Free physical memory: 472MB (483700kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.10.2005 ISO compilation 7:47:10 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 7:47:10 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 7:47:10 PM #3 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVD+RW GCA-4040N running 7:47:10 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 7:47:10 PM #5 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 7:47:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2285759 (507:56.59, 4464MB) 7:47:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 7:47:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R01, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 1 7:47:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:47:10 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2285760 (2285760) = #2285760/507:56.60 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285760 blocks [HL-DT-ST DVD+RW GCA-4040N] -------------------------------------------------------------- 7:47:10 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681236480, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2285760 | lead-out | 1 | 0x00 | 0x41 7:47:10 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 7:47:10 PM #13 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 7:47:10 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 7:47:10 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 4x (5,540 KB/s) 7:47:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:47:10 PM #17 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: RICOHJPN Media type ID: R01 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 52 30 31 02 38 ...RICOHJPNR01.8 23 54 37 09 00 3C 67 00 - AC 62 16 18 0B 0B 0A 0B #T7..<g..b...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 7:47:10 PM #18 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 14:17,540 (857540ms) -> OK 7:47:10 PM #19 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: Yes 7:47:25 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03630000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 7:47:25 PM #21 CDR -1135 File Writer.cpp, Line 304 Write error 7:47:25 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 7:47:25 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 7:47:26 PM #24 Phase 127 File dlgbrnst.cpp, Line 1845 Generating DVD high compatibility borders 7:47:26 PM #25 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 7:47:26 PM #26 Phase 129 File dlgbrnst.cpp, Line 1845 Generating DVD borders completed successfully 7:47:26 PM #27 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 7:47:26 PM #28 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 4:02:55 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Nero version: 6.3.1.17 your nero is old 6.6.0.16 is newest get nero update here - http://ww2.nero.com/nero6/enu/nero-up.php Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 Make sure your firmware is up to date for your recorder DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: Off CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off DMA should be on for everything DMA guide here - http://home.comcast.net/~bbmayo/FAQ.htm Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2285759 (507:56.59, 4464MB) your burning to close to the edge of the disc, set target size to 4300 in your software peace
So I've updated the firmware to 1.19 and updated the nero as well. Followed the instructions to have DMA set to "on", however I can't get the last one to "on" despite following the instructions. Also did a simple test burn with a tiny amount of data. STILL FAILED!! Could it be just be the solution of changing brands of media? Most recent fail log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.19 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.16 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040N D: CDRom3 Generic DVD-ROM E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047532kB) Free physical memory: 661MB (677700kB) Memory in use : 35 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.10.2005 ISO compilation 11:31:37 PM #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:31:38 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 11:31:38 PM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVD+RW GCA-4040N running 11:31:38 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:31:38 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:31:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 21567 ( 4:47.42, 42MB) 11:31:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 11:31:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R01, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 1 11:31:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:31:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 21568 (21568) = #21568/4:47.43 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 21568 blocks [HL-DT-ST DVD+RW GCA-4040N] -------------------------------------------------------------- 11:31:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 44171264, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 21568 | lead-out | 1 | 0x41 | 0x00 11:31:39 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:31:39 PM #13 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 11:31:39 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:31:39 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 11:31:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:31:39 PM #17 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: RICOHJPN Media type ID: R01 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 52 30 31 02 38 ...RICOHJPNR01.8 23 54 37 09 00 3C 67 00 - AC 62 16 18 0B 0B 0A 0B #T7..<g..b...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 11:31:39 PM #18 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 11:31:53 PM #19 SCSI -1135 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04100000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 11:31:53 PM #20 CDR -1135 File Writer.cpp, Line 311 Write error 11:31:53 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:31:54 PM #22 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 11:31:54 PM #23 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 11:31:54 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 4:02:55 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 7:31:48 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I had the same problem that you are having just today as a matter of fact. Here's what I did to resolve it. I completly removed the Nero software that was installed. The problem started when I updated recently so I wanted to go back to the first install. I went to the Nero website and downloaded the cleaning tools that they offer and ran those. Then I used programs like CCcleaner, and such and tried to remove all reference to Nero. Then I installed the Nero software that came with the burner and No updates. Then I backed up a DVD with no problems. I am not going to update until some other problem comes along. Hope this helps. Falcon07
What media are you using? The log says "medium error", that's a bit of a give away. Especially as it says it on both logs!
i am currently having the same problem i appear to have the latest version of nero6.6.0.16 but it is just a demo. my DMA's are on. i might be burning to close to the edge but on some burns it stops halfway or less. however i am using a laptop sony vaio Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.16 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 16b Recorder: <MATSHITA UJ-831Da> Version: 1.00 - HA 0 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23FA-80 atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA UJ-831Da atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === MATSHITA UJ-831Da E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 502MB (514480kB) Free physical memory: 132MB (135556kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.10.2005 NeroAPI 2:22:33 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 2:22:33 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 2:22:33 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 2:22:33 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 2:22:33 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 2:22:33 PM #6 Text 0 File Writer.cpp, Line 122 Writer MATSHITA UJ-831Da running 2:22:33 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:22:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:22:34 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 2:23:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 2:23:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 2:23:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: MATSHITA UJ-831Da, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 2:23:07 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 2:23:07 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [MATSHITA UJ-831Da] -------------------------------------------------------------- 2:23:07 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [MATSHITA UJ-831Da] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 2:23:07 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 2:23:07 PM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 2:23:07 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 2:23:07 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 1x (1,385 KB/s) 2:23:07 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:23:07 PM #21 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 2:23:07 PM #22 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Buffer underrun protection -> ON 2:23:07 PM #23 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 2:23:07 PM #24 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 30000 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:42:29 PM #25 SCSI -400 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x14AF0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x03 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x0B 0x53 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x04 0x00 0x0B 0x50 0xA0 0x0A 0x00 0x32 0x00 0x00 0x03 0x01 2:42:29 PM #26 CDR -400 File Writer.cpp, Line 311 Unspecified target error 2:42:29 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:42:29 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 2:42:29 PM #29 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 742303 2:42:29 PM #30 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 1x (1,385 KB/s) 2:42:29 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 2:42:29 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.19E, size=20576 bytes, created 10/21/2004 2:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@BangHatch - you don't need to worry about DMA on that last one, it's one of those virtual drives. there's nothing wrong in the logfile now so maybe your burning either needs a clean or just doesn't like those discs. @Cisco21 - - make sure to close more programs prior to any dvd work - you're burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space - your ATAPI drivers aren't listed in this paragraph. fix via this - http://home.comcast.net/~bbmayo/checking DMA.pdf
Ahh Thanks for the replies! Creaky, Do you mean to physically clean (as in with a drive cleaner), or do a "clean" as what Falcon07 mentioned? I've never changed CDR/DVD+R brands before and these were the discs I've been using ever since, and have been burning regularly. It's only now that happened and no longer wants to burn. I hope it just needs to be cleaned. Thanks very much (again)
@BangHatch - i meant physically as i initially look at things in what might be considered a 'blinkered' fashion, ie i tear a logfile to shreds to rule out all the obvious and go from there..i also do that as it's easier to isolate problems. but all suggestions are good..
