Hi! i copyed a DVD to DVD using nero 6. and wen i put it on ma DVD player everything comes but after 2 chapters its freezing and its not continuing. so its not getting past da 2nd chapter. so i tried forwarding frum chapter 2 and its freezing not continuing on. i think this is the DVD burners fault but i cant explain why its 2 hard through words but all i can say is dat wen it was burning da computer stopped reading da DVD and started stopped and started stopped and started if u know wat i mean. and so i wasted ma DVD and now can i have any advice or solution? i am gonna try 2 burn again on a another DVD after ppl reply 2 dis and gimme something to do. THANX pls reply
Just what DVD are you trying to backup? Look in My Computer, Program Files, Ahead, Nero and then Nero History. Find the log file of the bad burn and cut and paste it in a reply here, edit out your serial number.
Well juss 2 let u no Nero never gave me any error messeges it was only wen i tried da DVD out on da DVD player i found out thanx 4 ur help! ====== *** Nero-Burning Rom, History File *** ====== 1A23-3072-8045-7509-9605-6424 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 0 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON DVD+RW SOHW-802S>Version: UPP6 - HA 0 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : LITE-ON DVD+RW SOHW-802S atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CD-S480/AH atapi Port 0 ID 1 DMA: On DiskPeripheral : SAMSUNG SP1614C atapi Port 1 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVD+RW SOHW-802S E: CDRom0 ASUS CD-S480/AH F: CDRom1 Generic DVD-ROM K: CDRom2 Generic DVD-ROM L: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 53MB (54396kB) Memory in use : 89 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.10.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 9:17:46 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 9:17:46 AM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 9:17:46 AM #3 Text 0 File DVDCopy.cpp, Line 293 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 1846272 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 9:17:46 AM #4 Text 0 File DVDCopy.cpp, Line 406 Max -1 tracks of 1 allowed to copy 1: 0 - 1846272 = 1846272, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 9:17:46 AM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:17:46 AM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 1846271 (410:16.71, 3605MB) 9:17:46 AM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD DVD) 9:17:46 AM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:17:46 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1846272 (1846272) = #1846272/410:16.72 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1846272 blocks [Image Recorder] -------------------------------------------------------------- 9:17:46 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3781165056, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1846272 | lead-out | 1 | 0x41 | 0x00 9:17:46 AM #11 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 9:17:46 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:52:36 AM #13 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 1846272 (1C2C00h), lenght 0 blocks 9:52:37 AM #14 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:52:40 AM #15 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 9:53:26 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 9:53:26 AM #2 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVD+RW SOHW-802S running 9:53:38 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3781165056 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=410:16.72 ( 1846272) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Owner\My Documents\TempImage.nrg> 9:53:38 AM #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:53:38 AM #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1846271 (410:16.71, 3605MB) 9:53:38 AM #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD DVD) 9:53:38 AM #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVD+RW SOHW-802S, Media type: DVD+R 9:53:38 AM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:53:38 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1846272 (1846272) = #1846272/410:16.72 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1846272 blocks [LITE-ON DVD+RW SOHW-802S] -------------------------------------------------------------- 9:53:38 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVD+RW SOHW-802S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3781165056, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1846272 | lead-out | 1 | 0x41 | 0x00 9:53:39 AM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 9:53:39 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:53:39 AM #13 SCSI -1066 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0B6F0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 9:53:39 AM #14 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 10:34:09 AM #15 Text 0 File WriterStatus.cpp, Line 116 <LITE-ON DVD+RW SOHW-802S> start writing Lead-Out at LBA 1846272 (1C2C00h), lenght 0 blocks 10:34:09 AM #16 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:34:34 AM #17 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11,080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.22a, size=20576 bytes, created 12/8/2004 2:03:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== im gessing dis is wat u were asking 4
Try slowing it down to 4x, and see if this works. Also cannot find what kind of media you are using. Make sure you are using good media such as Verbatim, Sony, Maxell or Fuji. Try closing down some of your programs running in the background, there is not much memory here for Nero to work with.
hi! thank u soo much 4 ur help! i am a newbie! and i am copying a verbatim wedding DVD 2 a BenQ DVD thanx!
