THIS IS THE MESSAGE I AM RECIEVENG WHEN I AM BURNING A DVD RECENTLY IT WAS NOT LIKE THAT BEFORE Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM Nero version: 6.3.0.2 (Nero Express) Recorder: <HL-DT-ST DVD-RW GWA-4080N>Version: 0C09 - HA 1 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVD-RW GWA-4080N>Version: 0C09 - HA 1 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2080AT PL atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-RW GWA-4080N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-RW GWA-4080 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 1022MB (1047536kB) Free physical memory: 574MB (588532kB) Memory in use : 43 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.10.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 10:09:32 AM #1 CDR -1202 File DriveLocker.cpp, Line 683 Drive is in use of IMAPI HL-DT-ST DVD-RW GWA-4080N\H1 T0 10:09:32 AM #2 Text 0 File Reader.cpp, Line 118 Reader running 10:09:32 AM #3 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 10:09:32 AM #4 Text 0 File DVDCopy.cpp, Line 241 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2288640 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 10:09:32 AM #5 Text 0 File DVDCopy.cpp, Line 334 Max -1 tracks of 1 allowed to copy 1: 0 - 2288640 = 2288640, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:09:32 AM #6 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 10:09:32 AM #7 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 2288639 (508:35.14, 4469MB) 10:09:32 AM #8 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 10:09:32 AM #9 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:09:32 AM #10 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:09:32 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2288640 (2288640) = #2288640/508:35.15 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288640 blocks [ Image Recorder ] -------------------------------------------------------------- 10:09:32 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4687441920, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2288640 | lead-out | 1 | 0x00 | 0x41 10:09:32 AM #13 Phase 120 File dlgbrnst.cpp, Line 1800 Creating the image for burning 10:09:33 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:29:05 AM #15 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 2288640 (22EC00h), lenght 0 blocks 10:29:05 AM #16 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:29:06 AM #17 Phase 121 File dlgbrnst.cpp, Line 1800 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 10:29:11 AM #1 Text 0 File Reader.cpp, Line 118 Reader running 10:29:11 AM #2 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVD-RW GWA-4080N running 10:29:11 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 392474624 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:35.15 ( 2288640) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Kamar Blake\My Documents\TempImage.nrg> 10:29:11 AM #4 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 10:36:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2288639 (508:35.14, 4469MB) 10:36:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 10:36:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: HL-DT-ST DVD-RW GWA-4080N, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:36:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.) 10:36:47 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 2288640 (2288640) = #2288640/508:35.15 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288640 blocks [HL-DT-ST DVD-RW GWA-4080N] -------------------------------------------------------------- 10:36:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [HL-DT-ST DVD-RW GWA-4080N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4687134720, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2288640 | lead-out | 1 | 0x00 | 0x41 10:36:48 AM #11 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 8x (11,040 KB/s) 10:36:48 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:36:48 AM #13 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 03 4D 43 43 00 00 00 - 00 00 30 30 33 00 38 23 ..MCC.....003.8# 54 37 15 02 52 6C 02 B4 - 63 15 15 0B 0A 08 08 01 T7..Rl..c....... 19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................ 10:36:48 AM #14 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 7:11,789 (431789ms) -> OK 10:36:48 AM #15 Text 0 File DVDPlusRW.cpp, Line 564 Start write address at LBA 0 DVD high compatibility mode: Yes 10:41:14 AM #16 SCSI -1061 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02BD0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0x90 CDB Data: 0x2A 0x00 0x00 0x01 0xBE 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10 0x35 0x00 0x00 0x0E 0x44 0x90 10:41:14 AM #17 CDR -1061 File Writer.cpp, Line 301 Internal target failure 10:41:14 AM #18 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:41:15 AM #19 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:41:15 AM #20 SCSI -1061 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0x90 CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10 0x35 0x00 0x00 0x0E 0x44 0x90 10:41:15 AM #21 Phase 127 File dlgbrnst.cpp, Line 1800 Generating DVD high compatibility borders 10:41:15 AM #22 SCSI -1176 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x10 0x00 0x35 0x31 0x0E 0x72 0x03 10:41:15 AM #23 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 10:41:15 AM #24 CDR -1061 File WriterStatus.cpp, Line 164 Internal target failure HL-DT-ST DVD-RW GWA-4080N\H1 T0 10:41:15 AM #25 TRANSFER -24 File WriterStatus.cpp, Line 164 Could not perform end of Disc-at-once 10:41:15 AM #26 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 10:41:16 AM #27 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 8x (11,040 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 5/2/2003 11:37:32 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 12:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
hi.. - too old, update (free) to latest 6.x version, 6.6.0.16 - the best i can see is this looks like an LG drive, but am having trouble finding firmware. Even went to a proper LG site - http://us.lgservice.com and can't find info on firmware....so basically i don't know if it's current or out of date - yup, Nero's too old to recognise the burner, update Nero - turn off IMAPI. here's some good info as to why you should turn it off (change it to manual instead of auto) - http://www.ntcompatible.com/thread25657-1.html i think the easiest way to do it is via this - http://i5.photobucket.com/albums/y178/creaky/untickcdrecordinginXP.jpg - the original disc has been burnt too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space - because the original disc has been burnt too close to outer edge of disc, so will the copied disc. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space - very nice media - what's happened there ?. follow ALL suggestions.. - see previous comment - most ppl recommend burning at 4x
I have a GWA-4080N as well. I can't use my dvd drive or burner at the moment. I think it is because none of the actual drivers are installed. Neither the HP site, nor the LG site has the drivers. Can anyone suggest where I can look? Thanks Anirudh
