I have tried everything I can think of I can not make a copy of dvd using nero just backing up a copy. Anyt help would be appreciated here is my log Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero version: 6.3.1.26 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0A - HA 0 TA 0 - 6.3.1.26 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS0A - HA 0 TA 0 - 6.3.1.26 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-52327S atapi Port 0 ID 1 DMA: On DiskPeripheral : IOMEGA ZIP 100 atapi Port 1 ID 1 DMA: Off DiskPeripheral : WDC WD2500JD-57HBB1 15.0 si3112r Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1693S D: CDRom0 LITE-ON LTR-52327S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785904kB) Free physical memory: 537MB (550484kB) Memory in use : 29 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.10.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 7:47:42 PM #1 Text 0 File Reader.cpp, Line 126 Reader running 7:47:42 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 7:47:42 PM #3 Text 0 File DVDCopy.cpp, Line 271 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2201888 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) 7:47:42 PM #4 Text 0 File DVDCopy.cpp, Line 374 Max -1 tracks of 1 allowed to copy 1: 0 - 2201888 = 2201888, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 7:47:42 PM #5 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-at-once, using DVD media 7:47:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 2201887 (489:18.37, 4300MB) 7:47:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 7:47:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 7:47:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:47:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2201888 (2201888) = #2201888/489:18.38 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2201888 blocks [ Image Recorder ] -------------------------------------------------------------- 7:47:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4509773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2201888 | lead-out | 1 | 0x00 | 0x41 7:47:43 PM #12 Phase 120 File dlgbrnst.cpp, Line 1855 Creating the image for burning 7:47:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:57:08 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05A41000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x1F 0x8B 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 7:57:13 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05A41000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x1F 0x8B 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 7:57:13 PM #16 TRANSFER -25 File Reader.cpp, Line 379 Error reading data 7:57:13 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 7:57:13 PM #18 Phase 22 File dlgbrnst.cpp, Line 1855 Reading disc failed ===== Disc-Copy over image - 2nd step : Burn the image ... 7:47:42 PM #1 Text 0 File Reader.cpp, Line 126 Reader running 7:47:42 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 7:47:42 PM #3 Text 0 File DVDCopy.cpp, Line 271 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2201888 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) 7:47:42 PM #4 Text 0 File DVDCopy.cpp, Line 374 Max -1 tracks of 1 allowed to copy 1: 0 - 2201888 = 2201888, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 7:47:42 PM #5 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-at-once, using DVD media 7:47:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 2201887 (489:18.37, 4300MB) 7:47:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 7:47:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 7:47:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:47:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2201888 (2201888) = #2201888/489:18.38 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2201888 blocks [ Image Recorder ] -------------------------------------------------------------- 7:47:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4509773824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2201888 | lead-out | 1 | 0x00 | 0x41 7:47:43 PM #12 Phase 120 File dlgbrnst.cpp, Line 1855 Creating the image for burning 7:47:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:57:08 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05A41000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x1F 0x8B 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 7:57:13 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05A41000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x1F 0x8B 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 7:57:13 PM #16 TRANSFER -25 File Reader.cpp, Line 379 Error reading data 7:57:13 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 7:57:13 PM #18 Phase 22 File dlgbrnst.cpp, Line 1855 Reading disc failed Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=6.1.0.88 , size=24698 bytes, created 5/22/2003 12:20:36 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 5/31/2005 5:36:01 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 3, size=92928 bytes, created 8/27/2004 10:02:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 3, size=28672 bytes, created 8/27/2004 10:02:46 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 3, size=7680 bytes, created 8/27/2004 10:04:16 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Thanks
Nero could not read the data from the original DVD you had in the reader.. issues: You need to remove InCD from your PC. Use this Nero tool: http://ww2.nero.com/nero6/en/InCD_CleanTool.html This could be the cause of your problem. Also it is a known fact that some drives, especially DVD burners, do not read burned copys very well. Sometimes it works to start the DVD you want to copy with a media player. Once the movie begins you can let it play for a few moments, pause it and then open your DVD software. Something to try. DMA is off on your hard drive. You should enable it in your device manager. Here's a guide I made: http://www.dvdplusvideo.com/dvdguide005.html Your Lite-on firmware is a bit out of date, find new firmware (KSOB) here: http://forum.rpc1.org/dl_result.php?kaj=1&isces Your firmware is only one version behind. (KSOA)
And update your Nero, I've actually never seen alog with Nero as old as yours, exept Saugmon but he said it's working better for him, but the consensus is to update. What kind of disc has that much space? I jsut read your post, sry read it too fast.
Hehe...Looking again at those sizes.... Last possible write address on media: 2147483646 (477218:35.21, [bold]4194303MB[/bold]) That's four million, one hundred ninety-four thousand, three hundred and three megabytes...right? if you divide that by 1024 you get about 4096 GB which is about 4 TB!! So there should be plenty of room for your video You should definitely update your Nero: http://nero.com/nero6/enu/nero-up.php Get package 1 & package 2 only.
In addition to the above members had mentioned, I'll just add 2 more below. You should choose your Lite-On SOHW 1693S burner instead of the Image Recorder. Here is the beginning of your log: Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0A -- right before you're going to burn, click on "Options" on the right of Image Recoder and Lite-On burner, then choose your Lite-On. You really need to dump that Roxio application. It won't do any good to you, especially with Nero installed on your system. It conflicts with Nero all the times, and thus, it's turning all your burnings into "coasters". Go here http://www.downloadjunction.com/product/store/15199 and get Roxio Zapper to completely wipe it out from your system.
