My computer stopped recording dvd-video. I try burning DVD-video with the video_TS folder procedure and it fails at the end of the burn. Tried formating the C drive, tried different versions of Nero, tried different media incl Verbatim nothing helps. I am going nuts. It burns CDs and the occasional data DVD ok but it just wouldnt back up dvd-video. PLS HELP here is the log: 5C Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 Recorder: <SONY DVD RW DW-U50A> Version: 1.5f - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SONY DVD RW DW-U50A >Version: 1.5f - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23EA-40 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-U50A atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DW-U50A E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (521712kB) Free physical memory: 273MB (279972kB) Memory in use : 46 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.11.2005 UDF/ISO compilation 19:09:45 #1 Phase 112 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation started 19:09:45 #2 Phase 114 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation completed (no file modified) 19:09:45 #3 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 19:09:45 #4 Phase 111 File dlgbrnst.cpp, Line 1725 DVD-Video files sorted 19:09:46 #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 19:09:46 #6 Text 0 File Reader.cpp, Line 124 Reader running 19:09:46 #7 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DW-U50A running 19:09:46 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 19:09:46 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 19:09:46 #10 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 19:09:46 #11 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286111 (508:01.36, 4465MB) 19:09:46 #12 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 19:09:46 #13 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: SONY DVD RW DW-U50A, Media type: DVD-R Disc Manufacturer: Prodis - cF01 Disc Application Code: 64, Disc Physical Code: 193 19:09:46 #14 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:09:46 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [E: SONY DVD RW DW-U50A] -------------------------------------------------------------- 19:09:46 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: SONY DVD RW DW-U50A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 19:09:46 #17 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 19:09:46 #18 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 19:09:46 #19 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 19:09:46 #20 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 19:09:46 #21 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 1x (1,385 KB/s) 19:09:47 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 19:09:47 #23 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 19:09:47 #24 Text 0 File MMC.cpp, Line 21611 Set BUFE: Power-Burn -> ON 19:09:47 #25 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 19:09:47 #26 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:09:52 #27 Text 0 File Cdrdrv.cpp, Line 1197 19:09:52.734 - E: SONY DVD RW DW-U50A : Queue again later 19:11:22 #28 Text 0 File Cdrdrv.cpp, Line 1197 19:11:22.078 - E: SONY DVD RW DW-U50A : Queue again later 20:07:34 #29 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DW-U50A> start writing Lead-Out at LBA 2286112 (22E220h), length 0 blocks 20:07:34 #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 20:07:35 #31 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 2286111 20:09:44 #32 SPTI -1046 File SCSIPassThrough.cpp, Line 323 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x00 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 30 20:09:44 #33 CDR -1046 File ThreadedTransferInterface.cpp, Line 1937 Illegal disc E: SONY DVD RW DW-U50A 20:09:44 #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937 Could not perform end of Disc-at-once 20:09:44 #35 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was -1 20:09:44 #36 CDR -201 File WriterStatus.cpp, Line 167 Invalid write state E: SONY DVD RW DW-U50A 20:09:44 #37 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 20:09:44 #38 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 1x (1,385 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You need to edit out your Nero serial number. To edit: click on the "pencil & paper" icon on the right inside the faded orange like bar, then edit your Nero serial out. Once you're done click "save changes". Your burner's firmware is out of dated, go here http://forum.rpc1.org/dl_firmware.php?download_id=1624 and download the latest 1.5g to run the updates on your burner. Your Sony burner's DMA is Off, you need to "uninstall" its driver, so it can turns back DMA on. ((To enable DMA back ON by "uninstalling" it's driver “for Win XP users”)) A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES" B) left click on "HARDWARE", left click on "DEVICE MANAGER" C) left click on + sign of DVD/CD-ROM Drives D) double left click on your DVD burner or your dvd-rom drive E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer F) once you restart your computer, Windows should automatically detect your DVD burner’s drive and re-install it for you. That's it...easy as smoking!! NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the “IDE ATA/ATAPI Controllers” (A) left click on + sign of "IDE ATA/ATAPI Controllers" (B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel") (C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!! ***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps. NOTE: To verify your dvd burner/dvd-rom drivers with Nero: Open up "StartSmart", click on "Nero Toolkit", then click on "Nero InfoTool" (InfoTool will run and retrieve all drivers), now click on "Configuration" - this should show you where your DVD Burner/DVD-ROM is installed under either Primary or Secondary <--- make good note of that and you're ready to "uninstall" your dvd burner/dvd-rom drivers now. This is too close to the edges, try to custom to 4360MB or at least 4400MB with high quality media. This is not a very good brand, try TY, Verbatim or Maxell (Made In Japan) Your burner doesn't like the media. Try to burn at least 2X or 4X (at the max) with high quality media like Taiyo Yuden, Verbatim or Maxell (Made In Japan)
thanks for the comprehensive answer. two things nero info tool says I dont have system aspi. Do I need that? Second, where do I custom set to 4360mb from?
If you used Shrink to rip with then go to Edit -> Preferences and set the target size to Custom then 4360 MB for the media you are currently using. I don't know if you are using Shrink. You could always use Shrink to set the file size though. Looks like you have WinASPI: IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 That's all I've ever had. No problems. You know that DVD may play...It is missing part of the lead-out and it may act odd when the movie ends. I've made one or two of those. Try it.
Did all of the above and the same error comes up when Nero is closing the disk. I get it with quality media as well. Could it be the burner? here is the new log 5C800xxxxxxxxxxxxxxxxx Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 Recorder: <SONY DVD RW DW-U50A> Version: 1.5g - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SONY DVD RW DW-U50A >Version: 1.5g - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : HITACHI_DK23EA-40 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-U50A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD RW DW-U50A E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (521712kB) Free physical memory: 190MB (194996kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.11.2005 UDF/ISO compilation 10:30:53 #1 Phase 112 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation started 10:30:54 #2 Phase 114 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation completed (no file modified) 10:30:54 #3 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:30:54 #4 Phase 111 File dlgbrnst.cpp, Line 1725 DVD-Video files sorted 10:30:54 #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 10:30:54 #6 Text 0 File Reader.cpp, Line 124 Reader running 10:30:54 #7 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DW-U50A running 10:30:54 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:30:54 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:30:54 #10 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 10:30:55 #11 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2232863 (496:11.38, 4361MB) 10:30:55 #12 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 10:30:55 #13 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: SONY DVD RW DW-U50A, Media type: DVD-R Disc Manufacturer: Prodis - cF01 Disc Application Code: 64, Disc Physical Code: 193 10:30:55 #14 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:30:55 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2232864 (2232864) = #2232864/496:11.39 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232864 blocks [E: SONY DVD RW DW-U50A] -------------------------------------------------------------- 10:30:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: SONY DVD RW DW-U50A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4572905472, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2232864 | lead-out | 1 | 0x41 | 0x00 10:30:55 #17 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:30:55 #18 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 10:30:55 #19 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 10:30:55 #20 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 10:30:55 #21 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 1x (1,385 KB/s) 10:30:55 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:30:55 #23 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 10:30:55 #24 Text 0 File MMC.cpp, Line 21611 Set BUFE: Power-Burn -> ON 10:30:55 #25 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 10:30:55 #26 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:31:02 #27 Text 0 File Cdrdrv.cpp, Line 1197 10:31:02.203 - E: SONY DVD RW DW-U50A : Queue again later 10:32:38 #28 Text 0 File Cdrdrv.cpp, Line 1197 10:32:38.250 - E: SONY DVD RW DW-U50A : Queue again later 10:32:39 #29 Text 0 File Cdrdrv.cpp, Line 1197 10:32:39.000 - E: SONY DVD RW DW-U50A : Queue again later 10:32:39 #30 Text 0 File Cdrdrv.cpp, Line 1197 10:32:39.031 - E: SONY DVD RW DW-U50A : Queue again later 10:46:14 #31 Text 0 File Cdrdrv.cpp, Line 1197 10:46:14.984 - E: SONY DVD RW DW-U50A : Queue again later 11:04:54 #32 Text 0 File Cdrdrv.cpp, Line 1197 11:04:54.593 - E: SONY DVD RW DW-U50A : Queue again later 11:27:33 #33 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DW-U50A> start writing Lead-Out at LBA 2232864 (221220h), length 0 blocks 11:27:33 #34 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:27:33 #35 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 2232863 11:30:34 #36 SPTI -1046 File SCSIPassThrough.cpp, Line 323 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x00 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 30 11:30:34 #37 CDR -1046 File ThreadedTransferInterface.cpp, Line 1937 Illegal disc E: SONY DVD RW DW-U50A 11:30:34 #38 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937 Could not perform end of Disc-at-once 11:30:34 #39 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was -1 11:30:34 #40 CDR -201 File WriterStatus.cpp, Line 167 Invalid write state E: SONY DVD RW DW-U50A 11:30:34 #41 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 11:30:34 #42 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 1x (1,385 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- due to the burner being internal to the PC (i can tell that from HA 1 TA 0 - that means the burner is Master on the Secondary IDE channel) and that question mark there, there's something still not right wih your DM settings. try to get them sorted again
nero info tool confirms that the burner is the master of the secondary IDE and that both DMA and Autorun are on. What more can I do?
i think you just gotta persevere with the DMA settings as i can't see any reason why it's not working (yet). not disputing alkohol's DMA suggestion, i just find it easier to provide this one - http://home.comcast.net/~bbmayo/FAQ.htm if that doesn't work try this way (should be the same difference, just be very careful using regedit) -
