I have burnt bout 20 movies using Nero and it always works, now i bought a new spool of Sony DVD+R disc and I cannot get on DVD to burn. it doesnt even make it past 1% and an error comes up. i have tried changing things around, i get nothing, this has happened to me about 8 times now so i am just giving up cuz i dont want to waste any more blank disk. Please someone help me figure out what went wrong or if maybe my burning quit working or osmething like that. Ryan
that the problem your new spool of disks///////// they are made by a different manufaturer than your other disks buy some fugis made in japan .........
They are the same disk that i bought last time i believe. Sony DVD+R. the only difference is that these ones have an AccuCore thing that the last ones didnt and i dont think that would make a difference?
Hello, rdeb15. Please post the last section of your Nero burn log that begins with your name and the program serial number, omitting the name and serial number in the post. The log is located in the following path: Program Files -> Ahead -> Nero -> NeroHistory This should help a great deal in diagnosing the problem. It could very well be the media, but it could also be something else. Thanks.
Whilst posting your burn log also post disc identification from this link http://www.free-codecs.com/download/DVD_Identifier.htm
Here is my last failed log. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <MATSHITA UJ-840D> Version: 1.00 - HA 0 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <MATSHITA UJ-840D >Version: 1.00 - HA 0 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHV2080AT atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA UJ-840D atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === MATSHITA UJ-840D E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 502MB (514480kB) Free physical memory: 180MB (184508kB) Memory in use : 64 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.11.2005 UDF/ISO compilation 10:28:43 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 Unknown BurnPhase 10:28:43 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 Unknown BurnPhase 10:28:43 PM #3 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 10:28:43 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 Unknown BurnPhase 10:28:43 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 10:28:43 PM #6 Text 0 File Writer.cpp, Line 122 Writer MATSHITA UJ-840D running 10:28:43 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:28:43 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:28:43 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:28:44 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1987711 (441:42.61, 3882MB) 10:28:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:28:44 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: MATSHITA UJ-840D, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:28:44 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:28:44 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1987712 (1987712) = #1987712/441:42.62 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1987712 blocks [MATSHITA UJ-840D] -------------------------------------------------------------- 10:28:44 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [MATSHITA UJ-840D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4070834176, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1987712 | lead-out | 1 | 0x41 | 0x00 10:28:44 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Unknown BurnPhase 10:28:44 PM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:28:44 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Unknown BurnPhase 10:28:44 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Unknown BurnPhase 10:28:44 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:28:44 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 10:28:44 PM #22 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 10:29:19 PM #23 SCSI -1128 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x042B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 10:29:19 PM #24 CDR -1128 File Writer.cpp, Line 311 Unknown CDR error 10:29:19 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:29:19 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:29:19 PM #27 SCSI -1106 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 10:29:19 PM #28 SCSI -1106 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 10:29:19 PM #29 Phase 127 File dlgbrnst.cpp, Line 1832 Unknown BurnPhase 10:29:19 PM #30 Phase 129 File dlgbrnst.cpp, Line 1832 Unknown BurnPhase 10:29:19 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Unknown BurnPhase Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 1/12/2005 4:03:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Then here is my disk Identifier. ---------------------------------------------------------------------------- Unique Disc Identifier : [DVD+R:YUDEN000-T02-000] ---------------------------------------------------------------------------- Disc & Book Type : [DVD+R] - [DVD+R] Manufacturer Name : [Taiyo Yuden Co. Ltd.] Manufacturer ID : [YUDEN000] Media Type ID : [T02] Product Revision : [Not Specified] Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)] Recording Speeds : [1x-2.4x , 4x , 6x-8x] ---------------------------------------------------------------------------- [ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ] ----------------------------------------------------------------------------
Hey rdeb15. Edit your post (click on the pencil/paper icon in the upper right of your post) and edit out your name and serial number.
Check out this link to see if your drivers are current http://www.drivershq.com/default.asp?af=googledriver&bn=5
Did you install another DVD burning program like Roxio Easy CD, etc.? If so run Roxizap by following the instructions here: http://www.roxio.com/en/support/kb/ecddvdc/ee6000061.jhtml You might also try a different brand of media. Your media is TY which is very good. Correct me if I'm wrong, but isn't this a laptop burner? They tend to be picky with respect to media and usually aren't well supported with firmware updates. You might also try creating an iso file with Nero or DVD Shrink and then burning with DVD Decrypter. I spent a good portion of time trying to learn about this Matshita burner and little info is available.
My driver was good when i ran the driver detective. So i will go ahead and buy a different kind of media and see if that is my problem. I hope it is my problem and its not my burner going bad! thanks for all the help! Ryan
I bought a new media and re-installed Nero then i burnt a DVD and everything worked out great!!! I'm guessin that it was just the media and i need to not buy sony DVD+Rs anymore. thank you for all the help!
Now that you have re installed Nero and had a success, before you toss out your Sony discs give them another go, nothing to lose
