Pixeled sequences after burning with Nero. What can it be?

soljaris · Nov 7, 2005

I have a problem in burning some DVD-R with Nero.
A number of them start to have images that suffer from pixeling and freezing. This always happens toward the end of the movies.
Of the last 15 DVDs that I burned 2 were completely unwatchable in the last half hour or so and a couple others had some minor pixeling problem in the last couple of minutes of the movie.
All these were double layer DVDs that were first compressed with DVD Shrink and then automatically burned with Nero. I am sure that the problem happens in the burning phase, because the temporarary files created at the end of the backing up proceess on the hard disk of my laptop are totally OK when watched with Nero Showview.
I use 2 external Samsung writemaster drives for both reading and writing, since my internal drive was knocked out by a crash.
The discs on which I burn are Sony DVD-R in cakes of 25 pieces by Sony Europe.
The laptop I am using is a Compaq Evo N1015v with an Athlon 1.5 GHz processor, 128 Mega Ram, 1.1 USB doors (thus I am slow in the data passage) and about 15 Giga of free space in the hard discs.
The problem never occured when copying single layers DVDs from one drive to the other with the 'Quick Copy' option.
The originals of the 2 DVDs with which the problem had been bigger were both really long movies (about 2h and a half) whose original size was about 7 Giga.
After having read this, does anyone have a clue whether this is a problem originated by Nero software or the virgin DVD supports I use to burn or by some parts of my hardware?

Thanks in advance for any reply or suggestions.
Soljaris

GlueEater · Nov 7, 2005

Can I have your Nero Log? It should be under programfiles\ahead\Nero\Nerohistory, if you don't know how to find it jsut search "Nerohistory". Remember to edit out your serial number, the sequence of numbers at the top of your log. I just want the last section of it. You can differentiate sections via this divider ====== *** Nero-Burning Rom, History File *** ======

but from what you've told me it seems like either, bad media, too fast a burn, burning too close to the edge.

soljaris · Nov 8, 2005

If I understood your question correctly, the number you are looking for should be 8956.
As far as the reason for the problem, you would exclude the possibility of burning too fast. Since the writemaster drive is connected to the laptop processor via a 1.1 USB, the quantity of data it receives is far lower than what it could burn.
When you say that one of the possibilities is the low quality of the media, you mean the writable supports, ie in my case the Sony Europe DVD-R discs? Which kind of products - available in Europe - would you suggest me to burn on?

Thanks

LOCOENG · Nov 8, 2005

Sony, Fuji and Maxell (Made in Japan), Ritek, Verbatim, and Taiyo Yuden are generally considered to be the best media on the market. Everyone likes something different so try 'em and use the one that works the best for you. Stay away from CMC Magnetics made discs, you can find out the media code and manufacturer by using this tool: http://www.cdfreaks.com/software/104

And no you didn't understand the question...Please cut and paste the log to this thread for an interpretation.

GlueEater · Nov 8, 2005

I don't really know what the number '8956' is? here is what a Nero Log should look like:

====== *** NeroAPI, History File *** ======
Thomas Vu

1A20-****-****-****-****-**** NOTICE HOW I EDITED MY SERIAL NUMBER OUT

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/2/2005 3:09:13 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CDRom0
HL-DT-ST RW/DVD GCC-4481B F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 246MB (252656kB)
Free physical memory: 49MB (51116kB)
Memory in use : 79
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.11.2005
UDF/ISO compilation
7:00:00 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

7:00:00 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

7:00:00 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

7:00:00 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

7:00:00 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

7:00:00 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running

7:00:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

7:00:00 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

7:00:00 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

7:00:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202159 (489:22.09, 4301MB)

7:00:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

7:00:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

7:00:00 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:00:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

7:00:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202160 | lead-out | 1 | 0x41 | 0x00

7:00:01 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

7:00:01 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

7:00:01 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

7:00:01 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 6x (8,310 KB/s)

7:00:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:00:01 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

7:00:01 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

7:09:49 PM #23 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1693S> start writing Lead-Out at LBA 2202160 (219A30h), lenght 0 blocks

7:09:50 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:10:18 PM #25 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 6x (8,310 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 8:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/2/2005 3:09:13 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 2:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Click to expand...

Your burn speed and your rip speed are totally different things, I burn at 6x but I rip somewhere between 6000kbs to 9000kbs. Are you burning on the Fly? Is that what you meant by the usb 1.1 thing? You shouldn't burn over 4x esspecially if you have bad media. Taiyo Yuden is what I recommend and can be bought online. Try searching for an AD member named 'creaky', he lives in the UK and several times I have seen him reference other European people to a good online media store.

creaky · Nov 9, 2005

boo!

edited due to wearing Mr Magoo glasses !

From GlueEater's log -

Physical memory : 246MB (252656kB)
Free physical memory: 49MB (51116kB)
Memory in use : 79
Click to expand...

- 512MB is what i consider the minimum for dvd work, however for now you need to close down as much as you can to try to free up more memory.

fao soljaris's first post -

I think the problem here is the USB1.1 - i believe the most USB1.1 can sustain is 4x (i might be wrong i've done a partial nightshift). if i'm correct about the 4x thing, what i do know is the 1693S burner is lacking in 4x for various media codes, certainly when i (briefly) had a couple 1693S's i came across this with a few Verbatim media codes, ie the only burn speeds i have with my 8x media was 6x and 8x.

Someone happily prove me wrong but that's what i think the problem is.. (the USB1.1)

GlueEater · Nov 9, 2005

Umm... that wasn't his log, that was mine. lol

Or did you already knowthat and were just helping me?

creaky · Nov 9, 2005

@GlueEater - busted. you tricked me!.

still, your total memory is a little less than awful

Hopefully soljaris will post us a log...

soljaris · Nov 9, 2005

Is this what you are looking for:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 3 TA 1 - 6.6.0.8
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
VOBID InstantDrive CD E: CDRom0
TSSTcorp CD/DVDW SH-W162 F: CDRom2
TSSTcorp CD/DVDW TS-H552 D: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 27MB (28296kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.11.2005
NeroAPI
12.52.11 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

12.52.11 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

12.52.11 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

12.52.13 #4 Text 0 File Reader.cpp, Line 127
Reader running

12.52.13 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running

12.52.13 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12.52.13 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

12.52.13 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

12.52.13 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

12.52.14 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

12.52.14 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

12.52.14 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

12.52.14 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12.52.14 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------

12.52.14 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

12.52.22 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

12.52.23 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

12.52.23 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

12.52.23 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

12.52.25 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12.52.25 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

12.52.25 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

12.52.25 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

12.52.25 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12.52.43 #25 Text 0 File Cdrdrv.cpp, Line 1287
12:52:43.147 - TSSTcorp CD/DVDW TS-H552U\H3 T1 : Queue again later

14.59.45 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

14.59.46 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14.59.46 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286111

15.00.04 #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

15.00.05 #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

15.00.05 #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[07.11.2005]------------------------------------
12:52:11 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 3 TA 1 - 6.6.0.8
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
VOBID InstantDrive CD E: CDRom0
TSSTcorp CD/DVDW SH-W162 F: CDRom2
TSSTcorp CD/DVDW TS-H552 D: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 25MB (26272kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.11.2005
NeroAPI
21.23.33 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

21.23.33 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

21.23.33 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

21.23.34 #4 Text 0 File Reader.cpp, Line 127
Reader running

21.23.34 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running

21.23.34 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

21.23.34 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

21.23.34 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

21.23.34 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

21.23.35 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

21.23.35 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

21.23.35 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

21.23.35 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21.23.35 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------

21.23.35 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

21.23.41 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

21.23.42 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

21.23.42 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

21.23.42 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

21.23.43 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21.23.44 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

21.23.44 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

21.23.44 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

21.23.44 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

21.24.01 #25 Text 0 File Cdrdrv.cpp, Line 1287
21:24:01.205 - TSSTcorp CD/DVDW TS-H552U\H3 T1 : Queue again later

23.31.07 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

23.31.07 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23.31.08 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286111

23.31.26 #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

23.31.27 #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

23.31.27 #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[07.11.2005]------------------------------------
21:23:33 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162 F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 24MB (25492kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.11.2005
NeroAPI
5.22.10 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

5.22.11 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

5.22.11 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

5.22.12 #4 Text 0 File Reader.cpp, Line 127
Reader running

5.22.12 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162C running

5.22.12 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

5.22.12 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

5.22.13 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

5.22.13 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

5.22.13 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

5.22.13 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

5.22.13 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

5.22.13 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5.22.13 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

5.22.13 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00

5.22.20 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

5.22.20 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

5.22.20 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

5.22.20 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

5.22.23 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5.22.23 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

5.22.23 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

5.22.23 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

5.22.23 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5.22.42 #25 Text 0 File Cdrdrv.cpp, Line 1287
05:22:42.295 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

7.58.35 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks

7.58.36 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7.58.36 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286143

7.59.00 #29 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E23F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7.59.00 #30 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

7.59.01 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

7.59.01 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[08.11.2005]------------------------------------
05:22:11 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162 F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 30MB (31540kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.11.2005
NeroAPI
12.11.39 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

12.11.39 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

12.11.39 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

12.11.41 #4 Text 0 File Reader.cpp, Line 127
Reader running

12.11.41 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162C running

12.11.41 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12.11.41 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

12.11.41 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

12.11.41 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

12.11.42 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

12.11.42 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

12.11.42 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

12.11.42 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12.11.42 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

12.11.42 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

12.11.49 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

12.11.49 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

12.11.49 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

12.11.49 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

12.11.52 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12.11.52 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

12.11.52 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

12.11.52 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

12.11.53 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12.12.11 #25 Text 0 File Cdrdrv.cpp, Line 1287
12:12:11.788 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

14.47.49 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

14.47.49 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14.47.49 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286111

14.48.13 #29 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14.48.13 #30 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

14.48.14 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

14.48.14 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[08.11.2005]------------------------------------
12:11:39 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162 F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 27MB (28208kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.11.2005
NeroAPI
17.42.12 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

17.42.13 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

17.42.13 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

17.42.15 #4 Text 0 File Reader.cpp, Line 127
Reader running

17.42.15 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162C running

17.42.15 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

17.42.15 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

17.42.15 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

17.42.15 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

17.42.16 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286175 (508:02.25, 4465MB)

17.42.16 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

17.42.16 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

17.42.16 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17.42.16 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

17.42.16 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286176 | lead-out | 1 | 0x41 | 0x00

17.42.23 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

17.42.23 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

17.42.23 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

17.42.23 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

17.42.26 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17.42.26 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

17.42.26 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

17.42.26 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

17.42.26 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17.42.47 #25 Text 0 File Cdrdrv.cpp, Line 1287
17:42:47.112 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

20.18.23 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2286176 (22E260h), lenght 0 blocks

20.18.23 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20.18.24 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286175

20.18.48 #29 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E25F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20.18.48 #30 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

20.18.49 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

20.18.49 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[08.11.2005]------------------------------------
17:42:13 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162 F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 10MB (10328kB)
Memory in use : 90 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.11.2005
NeroAPI
22.53.19 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

22.53.19 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

22.53.19 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

22.53.21 #4 Text 0 File Reader.cpp, Line 127
Reader running

22.53.21 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162C running

22.53.21 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

22.53.21 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

22.53.21 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

22.53.21 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

22.53.22 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

22.53.22 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

22.53.22 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

22.53.22 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22.53.22 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

22.53.22 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

22.53.29 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

22.53.29 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

22.53.29 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

22.53.29 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

22.53.32 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22.53.32 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

22.53.32 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

22.53.32 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

22.53.32 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

22.53.50 #25 Text 0 File Cdrdrv.cpp, Line 1287
22:53:50.973 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

1.29.45 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

1.29.46 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1.29.46 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286111

1.30.10 #29 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

1.30.10 #30 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

1.30.12 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

1.30.12 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[08.11.2005]------------------------------------
22:53:19 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162 F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 21MB (22384kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.11.2005
NeroAPI
6.40.17 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

6.40.17 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

6.40.17 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

6.40.19 #4 Text 0 File Reader.cpp, Line 127
Reader running

6.40.19 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162C running

6.40.19 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

6.40.19 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

6.40.19 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

6.40.19 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

6.40.20 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

6.40.20 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

6.40.20 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

6.40.20 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6.40.20 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

6.40.20 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

6.40.26 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

6.40.26 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

6.40.26 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

6.40.26 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

6.40.29 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6.40.29 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

6.40.29 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

6.40.29 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

6.40.29 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6.40.48 #25 Text 0 File Cdrdrv.cpp, Line 1287
06:40:48.338 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

9.16.55 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

9.16.55 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9.16.55 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286111

9.17.19 #29 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9.17.19 #30 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

9.17.20 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

9.17.20 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[09.11.2005]------------------------------------
06:40:17 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162 F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 21MB (21620kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.11.2005
NeroAPI
13.54.48 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

13.54.48 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

13.54.48 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

13.54.50 #4 Text 0 File Reader.cpp, Line 127
Reader running

13.54.50 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162C running

13.54.50 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

13.54.50 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

13.54.50 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

13.54.50 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

13.54.51 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

13.54.51 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

13.54.51 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

13.54.51 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13.54.51 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

13.54.51 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

13.54.57 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

13.54.57 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

13.54.57 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

13.54.57 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

13.55.00 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13.55.00 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

13.55.00 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

13.55.00 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

13.55.00 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13.55.18 #25 Text 0 File Cdrdrv.cpp, Line 1287
13:55:18.782 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

16.31.05 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

16.31.05 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

16.31.05 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286111

16.31.29 #29 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16.31.29 #30 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

16.31.30 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

16.31.30 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[09.11.2005]------------------------------------
13:54:49 Robot error messages from:
====== *** NeroAPI, History File *** ======
DAVIDE TOSI
DAVIDE TOSI
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162 F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 20MB (20496kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.11.2005
DVD-Copy on the fly
16.37.59 #1 Text 0 File Reader.cpp, Line 127
Reader running

16.37.59 #2 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162C running

16.37.59 #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2255888 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

16.37.59 #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2255888 = 2255888, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

16.37.59 #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

16.37.59 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2255887 (501:18.37, 4406MB)

16.37.59 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

16.37.59 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

16.37.59 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16.37.59 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2255888 (2255888) = #2255888/501:18.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2255888 blocks [TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

16.37.59 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4620058624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2255888 | lead-out | 1 | 0x41 | 0x00

16.37.59 #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)

16.38.00 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

16.38.00 #14 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

16.38.00 #15 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

16.38.00 #16 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

16.38.00 #17 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16.38.54 #18 Text 0 File Cdrdrv.cpp, Line 1287
16:38:54.342 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

20.39.10 #19 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2255888 (226C10h), lenght 0 blocks

20.39.11 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20.39.11 #21 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2255887

20.39.36 #22 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 256C0F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20.39.36 #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11.080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162 F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 27MB (28216kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.11.2005
NeroAPI
23.06.45 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

23.06.45 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

23.06.45 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

23.06.47 #4 Text 0 File Reader.cpp, Line 127
Reader running

23.06.47 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162C running

23.06.47 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

23.06.47 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

23.06.47 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

23.06.48 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

23.06.48 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

23.06.48 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

23.06.48 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

23.06.48 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23.06.48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

23.06.48 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

23.06.57 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

23.06.57 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

23.06.57 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

23.06.57 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

23.07.00 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23.07.00 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

23.07.00 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

23.07.00 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

23.07.00 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

23.07.22 #25 Text 0 File Cdrdrv.cpp, Line 1287
23:07:22.365 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

1.42.53 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

1.42.53 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1.42.53 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286111

1.43.18 #29 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

1.43.18 #30 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

1.43.19 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

1.43.19 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[09.11.2005]------------------------------------
23:06:46 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A20-020N-0130-2355-9254-8956*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.8
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162 F: CDRom1
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 22020096 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 111MB (114156kB)
Free physical memory: 19MB (20336kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.11.2005
NeroAPI
5.56.11 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

5.56.11 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

5.56.11 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

5.56.12 #4 Text 0 File Reader.cpp, Line 127
Reader running

5.56.12 #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162C running

5.56.12 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

5.56.13 #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

5.56.13 #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

5.56.13 #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

5.56.14 #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

5.56.14 #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

5.56.14 #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

5.56.14 #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5.56.14 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------

5.56.14 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

5.56.21 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

5.56.21 #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

5.56.21 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

5.56.22 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11.080 KB/s)

5.56.25 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5.56.25 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

5.56.25 #22 Text 0 File Mmc.cpp, Line 21326
Set BUFE: Super Link -> ON

5.56.25 #23 Text 0 File DVDR.cpp, Line 2394
Start write address at LBA 0
DVD high compatibility mode: Yes

5.56.25 #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5.56.44 #25 Text 0 File Cdrdrv.cpp, Line 1287
05:56:44.784 - TSSTcorp CD/DVDW SH-W162C\H1 T0 : Queue again later

8.32.55 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

8.32.56 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8.32.56 #28 Text 0 File DVDR.cpp, Line 2657
EndDAO: Last written address was 2286111

8.33.20 #29 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E21F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8.33.20 #30 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 8x (11.080 KB/s)

8.33.21 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

8.33.21 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15.07.32

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[10.11.2005]------------------------------------
05:56:11 Robot error messages from:
====== *** NeroAPI, History File *** ======

creaky · Nov 9, 2005

@soljaris -

you've pasted entire contents of your Nero log. no biggie except your serial number has crept in throughout your post.

1A20-*******************
Click to expand...

- EDIT OUT your serial number from throughout your post (via the pencil icon at top right of your post)

Nero API version: 6.6.0.8
Click to expand...

- that's not too old, as latest 6.x version is 6.6.0.16, [bold]but[/bold] your burner isn't being recognise - see 3 comments down from here..

Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS07
Click to expand...

- burner's firmware is 3 versions behind, TS10 is here - http://forum.rpc1.org/dl_firmware.php?download_id=2078

Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Click to expand...

- as your burner is internal to the PC, this question mark is saying the ATAPI drivers aren't loaded correctly, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm

Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
Click to expand...

- yup, Nero's too old to recognise your burner

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2020AT E atapi Port 0 ID 0 DMA: On
Click to expand...

- the burner's invisible. update Nero as advised and reload the ATAPI drivers via the DMA fix in 4th comment

Physical memory : 111MB (114156kB)
Free physical memory: 27MB (28216kB)
Memory in use : 75 %
Click to expand...

- you're not seriously only using 128MB of RAM ?. wow that's awful. 512MB is what i consider the minimum for dvd work. you should get more memory, and for now you're gonna have to dig deep to close down as much as you can to free up more memory

Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
Click to expand...

- 4465MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space

Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
Click to expand...

i don't use Sony disks so won't comment on these

Burn process completed successfully at 8x (11.080 KB/s)
Click to expand...

- hmmm, i don't believe that going by all the tweaks needed in your setup

Existing drivers:
Click to expand...

- the ATAPI drivers are supposed to be listed in this section, sort them out as i've listed in 4th comment and they'll appear in this section

Log in or Sign up

Pixeled sequences after burning with Nero. What can it be?

soljaris Member

GlueEater Regular member

soljaris Member

LOCOENG Moderator Staff Member

GlueEater Regular member

creaky Moderator Staff Member

GlueEater Regular member

creaky Moderator Staff Member

soljaris Member

creaky Moderator Staff Member

Share This Page

Log in or Sign up

Pixeled sequences after burning with Nero. What can it be?

soljaris Member

GlueEater Regular member

soljaris Member

LOCOENG Moderator Staff Member

GlueEater Regular member

creaky Moderator Staff Member

GlueEater Regular member

creaky Moderator Staff Member

soljaris Member

creaky Moderator Staff Member

Share This Page

Useful Searches