Allo people, Have this problem where using the same software and same media as I had burned at 4 speed previously, I am only age to burn at 1 speed now. Software - Nero 6.6.0.3 (dvd shrink is used to rip the files but have tired with nero only and same issue.) drive - Pioneer 105 Media - Rivision DVD-R 4X 4.7GB 120 min Opperating system - Xp Sp 2 (All up to date.) AV - AVG free edition. When I try to burn at the higher speed I get the error below. Could anyone help me out please? "Richard a *** serial numbers edited out *** Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34 Nero version: 6.6.0.3 Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 fvdscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-105 D: CDRom0 HL-DT-ST DVD-ROM GDR8163 F: CDRom1 FvF-Inc CDDVD-2003-200x G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 228MB (234096kB) Memory in use : 55 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.11.2005 UDF/ISO compilation 22:30:56 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 22:30:56 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 22:30:56 #3 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 22:30:56 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 22:30:57 #5 Text 0 File Reader.cpp, Line 127 Reader running 22:30:57 #6 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-105 running 22:30:57 #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 22:30:57 #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 22:30:57 #9 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 22:30:57 #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2285929 (507:59.04, 4464MB) 22:30:57 #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD DVD) 22:30:57 #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 22:30:57 #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 22:30:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286080 (2286080) = #2286080/508:1.5 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286080 blocks [PIONEER DVD-RW DVR-105] -------------------------------------------------------------- 22:30:57 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 386924544, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286080 | lead-out | 1 | 0x41 | 0x00 22:30:57 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 22:30:57 #17 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 22:30:57 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 22:30:57 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 22:30:57 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 22:30:57 #21 Text 0 File DVDR.cpp, Line 2248 Recording mode: Sequential Recording Mode 22:30:57 #22 Text 0 File Mmc.cpp, Line 21025 Set BUFE: Buffer underrun protection -> ON 22:30:57 #23 Text 0 File DVDR.cpp, Line 2389 Start write address at LBA 0 DVD high compatibility mode: Yes 22:30:57 #24 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 22:30:59 #25 Text 0 File Cdrdrv.cpp, Line 1282 22:30:59.390 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later 22:31:06 #26 SCSI -1061 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04090000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x18 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 22:31:06 #27 CDR -1061 File Writer.cpp, Line 311 Internal target failure 22:31:06 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 22:31:07 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 22:31:07 #30 Text 0 File DVDR.cpp, Line 2632 EndDAO: Last written address was 767 22:31:07 #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) "
Hey, Update. Burned a disk at 1 speed and the disk says it is written on but has used 0 space and has nothing on it. Also I tested out burning a CD-r... this worked fine (Just burned a backup for my college work... not much like 50 Megs.) So... DVD writing failed but cd writing working fine.
Went to the pioneer site and found latest drivers was going to overwrite the autoexec.bat etc but before it could complete came up with following error ______________________< ERROR >_______________________ | | | There is no MSCDEX.EXE. | | Copy it to the boot drive from the DOS disk. | ______________< Quit for ERROR >______________ | | | Exit for error. | | If you have confirmed, press the SPACE key. | |______________________________________________| Searched my PC and no such file around. What do I do from here?
Your Nero is behind by a few versions. The current version is 6.6.0.16 Your DMA is off here is how you can turn it back on: ((To enable DMA back ON by "uninstalling" it's driver “for Win XP users”)) A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES" B) left click on "HARDWARE", left click on "DEVICE MANAGER" C) left click on + sign of DVD/CD-ROM Drives D) double left click on your DVD burner or your dvd-rom drive E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer F) once you restart your computer, Windows should automatically detect your DVD burner’s drive and re-install it for you. That's it...easy as smoking!! NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the “IDE ATA/ATAPI Controllers” (A) left click on + sign of "IDE ATA/ATAPI Controllers" (B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel") (C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!! ***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps. You are writing too close to the edge, here is how you can fix that, I am assuming that you are using shrink: In shrink got to Edit>Preference>in the first tab scroll down in box to 'custom'> then in the box beside it type in 4300. Try that
@GlueEater Yep, that was written by me. Anyways, I've updated with the fancy pictures now, so it'll be super easy to follow. @trickyd ((To enable DMA back ON by "uninstalling" its driver “for Win XP users” by alkohol)) Here are some helpful pictures for references. A) on "DESKTOP" right click on "MY COMPUTER," left click on "PROPERTIES" B) left click on "HARDWARE," left click on "DEVICE MANAGER" C) left click on + sign of IDE ATA/ATAPI Controllers D) double left click on either “Primary” or “Secondary IDE Channel” E) left click on "DRIVER," left click on "UNINSTALL" You will see a "Warning: you are about to uninstall this device from your system," just click "OK," now "SHUTDOWN" or "restart" your computer F) once you restart your computer, Windows should automatically detect your DVD burner’s drive and re-install it for you. That's it...easy as smoking!! **NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "Uninstall" it from the “DVD/CD-ROM Drives” ****at Device Manager**** (A) left click on + sign of DVD/CD-ROM Drives (B) double left click on your DVD burner or your DVD-ROM drive (C) click on "DRIVER," "UNINSTALL," "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
Carried out the above... think the log is showing DMA is on now but the exact same problem. What else can I try>? "Richard a ***** edited out ***** Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34 Nero version: 6.6.0.3 Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 fvdscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-105 D: CDRom8 HL-DT-ST DVD-ROM GDR8163 F: CDRom1 FvF-Inc CDDVD-2003-200x G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 148MB (151968kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.11.2005 UDF/ISO compilation 19:57:28 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 19:57:29 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 19:57:29 #3 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 19:57:29 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 19:57:29 #5 Text 0 File Reader.cpp, Line 127 Reader running 19:57:29 #6 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-105 running 19:57:29 #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 19:57:29 #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 19:57:29 #9 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 19:57:29 #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2285929 (507:59.04, 4464MB) 19:57:29 #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD DVD) 19:57:29 #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 19:57:29 #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:57:29 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286080 (2286080) = #2286080/508:1.5 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286080 blocks [PIONEER DVD-RW DVR-105] -------------------------------------------------------------- 19:57:29 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 386924544, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286080 | lead-out | 1 | 0x41 | 0x00 19:57:29 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 19:57:29 #17 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 19:57:29 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 19:57:29 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 19:57:29 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 19:57:29 #21 Text 0 File DVDR.cpp, Line 2248 Recording mode: Sequential Recording Mode 19:57:29 #22 Text 0 File Mmc.cpp, Line 21025 Set BUFE: Buffer underrun protection -> ON 19:57:29 #23 Text 0 File DVDR.cpp, Line 2389 Start write address at LBA 0 DVD high compatibility mode: Yes 19:57:29 #24 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:57:31 #25 Text 0 File Cdrdrv.cpp, Line 1282 19:57:31.875 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later 19:57:41 #26 SCSI -1061 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02ED0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x19 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 19:57:41 #27 CDR -1061 File Writer.cpp, Line 311 Internal target failure 19:57:41 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 19:57:41 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 19:57:41 #30 Text 0 File DVDR.cpp, Line 2632 EndDAO: Last written address was 767 19:57:41 #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)"
@alkohol Yeah that really is a great guide, I copied and pasted it from some other guy who posted it, I think it was MaxBurn. Kinda makes me seem lazy doesn't it. I can't even take the time to type out my own response and you take the time to put pictures in and improve it. lol
I upgraded to Nero 7... tried to burn again. Same issue. Latest error log I have added below. Any ideas? "Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 fvdscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-105 D: CDRom0 HL-DT-ST DVD-ROM GDR8163B F: CDRom1 FvF-Inc CDDVD-2003-200x G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 241MB (247580kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.11.2005 UDF/ISO compilation 23:18:38 #1 Phase 112 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation started 23:18:38 #2 Phase 114 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation completed (no file modified) 23:18:38 #3 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 23:18:38 #4 Phase 111 File dlgbrnst.cpp, Line 1725 DVD-Video files sorted 23:18:38 #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 23:18:38 #6 Text 0 File Reader.cpp, Line 124 Reader running 23:18:38 #7 Text 0 File Writer.cpp, Line 113 Writer D: PIONEER DVD-RW DVR-105 running 23:18:38 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 23:18:38 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 23:18:38 #10 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 23:18:38 #11 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286079 (508:01.04, 4464MB) 23:18:38 #12 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD DVD) 23:18:38 #13 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 23:18:38 #14 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 23:18:38 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286080 (2286080) = #2286080/508:1.5 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286080 blocks [D: PIONEER DVD-RW DVR-105] -------------------------------------------------------------- 23:18:38 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681891840, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286080 | lead-out | 1 | 0x41 | 0x00 23:18:38 #17 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 23:18:38 #18 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 23:18:38 #19 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 23:18:38 #20 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 23:18:38 #21 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 4x (5,540 KB/s) 23:18:38 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 23:18:38 #23 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 23:18:38 #24 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer underrun protection -> ON 23:18:38 #25 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 23:18:38 #26 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 23:18:41 #27 Text 0 File Cdrdrv.cpp, Line 1197 23:18:41.421 - D: PIONEER DVD-RW DVR-105 : Queue again later 23:18:48 #28 SPTI -1061 File SCSIPassThrough.cpp, Line 323 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00 Sense Area: 0x71 00 04 00 02 F3 18 0E 00 00 00 00 44 D9 Buffer x0a5e0000: Len x10000 0x00 00 01 BA 44 00 66 C0 5D 09 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 37 CE 1A 35 2E C9 6B 18 DF 0xDB 40 0A 00 1E 88 04 00 50 04 00 2E 04 00 42 00 23:18:48 #29 CDR -1061 File Writer.cpp, Line 302 Internal target failure D: PIONEER DVD-RW DVR-105 23:18:48 #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 23:18:48 #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 23:18:48 #32 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 767 23:18:48 #33 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) "
KEY_HARDWARE_ERROR indicates that the target detected a non-recoverable hardware failure while performing the command or during a self test. Think your burner might be on its way out.
- burner's firmware is up to date - as your burner is internal to the PC, that question mark is saying your ATAPI drivers still aren't loaded correctly, try to fix via this - http://home.comcast.net/~bbmayo/FAQ.htm - DMA needs to be ON, it will be fixed via following the above link - 4464MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space - the ATAPI drivers are supposed to be listed in this section, this will be sorted by following the DMA fix above
Hello all, Trickyd I had the same prob awhile back and it had me baffled for ages. Turned out what I had to do was uninstall nero from the add and remove programmes and then do a search on my pc, just type in nero. And then delete everything that comes up in your serch under nero. Then re-install nero, and hopefully you get no error.
Righty, ATAPI drivers are not updated.... DMA is showing as on for the writer... Have uninstalled nero, searched PC and removed everything to do with nero... reinstalled nero 6 Ultra edition. Now I still get errors... Going to try a new drive next. Anything else I can do? Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34 Nero Version: 6.6.0.8 Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-105 D: CDRom0 HL-DT-ST DVD-ROM GDR8163 F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 170MB (174712kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.11.2005 UDF/ISO compilation 01:00:02 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 01:00:02 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 01:00:02 #3 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 01:00:02 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 01:00:02 #5 Text 0 File Reader.cpp, Line 127 Reader running 01:00:02 #6 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-105 running 01:00:02 #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 01:00:02 #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 01:00:02 #9 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 01:00:02 #10 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286079 (508:01.04, 4464MB) 01:00:02 #11 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 01:00:02 #12 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 01:00:02 #13 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 01:00:02 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286080 (2286080) = #2286080/508:1.5 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286080 blocks [PIONEER DVD-RW DVR-105] -------------------------------------------------------------- 01:00:03 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681891840, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286080 | lead-out | 1 | 0x41 | 0x00 01:00:03 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 01:00:03 #17 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 01:00:03 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 01:00:03 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 01:00:03 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 01:00:03 #21 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 01:00:03 #22 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 01:00:03 #23 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 01:00:03 #24 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 01:00:04 #25 Text 0 File Cdrdrv.cpp, Line 1287 01:00:04.984 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later 01:00:12 #26 SCSI -1061 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02CC0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x19 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 01:00:12 #27 CDR -1061 File Writer.cpp, Line 311 Internal target failure 01:00:12 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 01:00:12 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 01:00:13 #30 Text 0 File DVDR.cpp, Line 2603 EndDAO: Last written address was 767 01:00:13 #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Well you still haven't updated your Nero, and now it's 6.6.0.18. And you are still writing too close to the edge. And you didn't do what Alkohol and I told you to do about that DMA. Why did you only turn on the DMA for your writer but not your other drive, the LG one.
Quite right, I didn't update my nero... I actually uninstalled it, removed all traces of it... and installed it again. It worked fine before so no reason to say why it would not work better now. Also, I tried to upgrade to the new version with much problems actually, I have spent the time from when I last posted until now fixing the mess that caused... So, I will be staying away from later versions of Nero for the time being. Only turned on the DMA for the Pioneer one as it is the only one involved, I saw little point in turning on DMA on a seccondary drive which had absolutely nothing to do with the process, but then I will do that if you think it will make a difference. Yeah, with the burning too close to the edge... fair comment. I was just trying to burn an image I previously used dvd shrink to backup which I no longer have in my possession... but I will try another backup with the changes above. I really appreciate your help like guys and didn't mean to upset you, I know I am running on goodwill here and the last thing I want is to P you off.
I see your point in only changing your Pioneer's DMA but aren't you using the other drive to rip the movie? This will make your rip time decrese so why not?
The DVD rom is a very recent addition to my PC to be honest. Before now I always used the one drive. I had bought the drive a wee while back but never installed it until recently. Ok, so this time I have done everything as above... I even did risk updating Nero and thankfully all went ahead fine. I used the new sony drive to rip things and also decreased the amount of the disk that nero was to write too. Unfortunately, still an error. I am going to leand another dvdr drive from a mate of mine, is there anything else I could realistically try before hand? Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PIONEER DVD-RW DVR-105 D: CDRom0 HL-DT-ST DVD-ROM GDR8163B F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 153MB (156996kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.11.2005 UDF/ISO compilation 18:55:26 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 18:55:26 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 18:55:26 #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 18:55:26 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 18:55:26 #5 Text 0 File Reader.cpp, Line 127 Reader running 18:55:26 #6 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-105 running 18:55:26 #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 18:55:26 #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 18:55:26 #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 18:55:27 #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2202143 (489:21.68, 4301MB) 18:55:27 #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 18:55:27 #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 18:55:27 #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:55:27 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [PIONEER DVD-RW DVR-105] -------------------------------------------------------------- 18:55:27 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2202144 | lead-out | 1 | 0x41 | 0x00 18:55:27 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 18:55:27 #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 18:55:27 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 18:55:27 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 18:55:27 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 18:55:27 #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 18:55:27 #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 18:55:27 #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 18:55:27 #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 18:55:29 #25 Text 0 File Cdrdrv.cpp, Line 1288 18:55:29.046 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later 18:55:36 #26 SCSI -1061 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04520000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF3 0x18 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 18:55:36 #27 CDR -1061 File Writer.cpp, Line 311 Internal target failure 18:55:36 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 18:55:37 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 18:55:37 #30 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 767 18:55:37 #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I honestly don't know why you would want to burn above 4x but w/e. read temj's post, that might be it.
Above 4x? Yeah, starting to think that hence setting up an exchange with my mate for a dvdr drive. Och well, I'll try it and let you know how I get on.
