I am trying to burn files ont a dvd-r with 4x speed. Everytime I try to burn, I get a "reset" error. I have tried another dvd, which was a sony dvd+rw and for some wierd reason It worked with that. Anyways here is my nero log I get after the reset error. If anyone can help, please post some advice. thanks in advance. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <MAD DOG MD-16XDVD9A4> Version: 1.F1 - HA 3 TA 0 - 6.6.0.18 Adapter driver: <> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA DVD-ROM SD-M1302>Version: 1006 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === CdRomPeripheral : TDK CDRW121032 atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-M1302 atapi Port 1 ID 1 DMA: On DiskPeripheral : WDC WD2000JD-00GBB0 02.0 viamraid Port 2 ID 0 DMA: Off === CDRom-Device-Map === TDK CDRW121032 E: CDRom2 TOSHIBA DVD-ROM SD-M1302 F: CDRom4 MAD DOG MD-16XDVD9A4 G: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047280kB) Free physical memory: 642MB (658304kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.11.2005 UDF/ISO compilation 2:33:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 2:33:17 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 2:33:17 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 2:33:17 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 2:33:17 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 2:33:17 PM #6 Text 0 File Writer.cpp, Line 122 Writer MAD DOG MD-16XDVD9A4 running 2:33:17 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:33:17 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:33:17 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 2:33:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 2:33:17 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 2:33:17 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: MAD DOG MD-16XDVD9A4, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 2:33:17 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:33:17 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [MAD DOG MD-16XDVD9A4] -------------------------------------------------------------- 2:33:17 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [MAD DOG MD-16XDVD9A4] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 2:33:17 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 2:33:17 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 2:33:17 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 2:33:17 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 2:33:17 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:33:17 PM #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 2:33:17 PM #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 2:33:17 PM #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 2:33:17 PM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:33:19 PM #25 Text 0 File Cdrdrv.cpp, Line 1288 14:33:19.828 - MAD DOG MD-16XDVD9A4\H3 T0 : Queue again later 2:33:23 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0BCD0000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 2:33:24 PM #27 Text 0 File Cdrdrv.cpp, Line 1288 14:33:24.406 - MAD DOG MD-16XDVD9A4\H3 T0 : Queue again later 2:33:24 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C381400 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 2:33:24 PM #29 Text 0 File Mmc.cpp, Line 19440 Writer-Buffer for MAD DOG MD-16XDVD9A4\H3 T0 reduced to 32768Bytes 2:33:25 PM #30 SCSI -1114 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C381400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 2:33:25 PM #31 CDR -1114 File Writer.cpp, Line 311 Reset occurred 2:33:25 PM #32 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:33:25 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 2:33:25 PM #34 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was -1 2:33:25 PM #35 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Wow, your firmware is so freakin old it's not even on the list at the firmware site. Here is a link to the current f/w, the newest one is 2.FA: http://forum.rpc1.org/dl_firmware.php?download_id=1906 Your DMA is off, here is a guide by [bold]Alkohol[/bold] that was so good that I decided to copy and paste: ((To enable DMA back ON by "uninstalling" it's driver “for Win XP users”)) A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES" B) left click on "HARDWARE", left click on "DEVICE MANAGER" C) left click on + sign of DVD/CD-ROM Drives D) double left click on your DVD burner or your dvd-rom drive E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer F) once you restart your computer, Windows should automatically detect your DVD burner’s drive and re-install it for you. That's it...easy as smoking!! NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the “IDE ATA/ATAPI Controllers” (A) left click on + sign of "IDE ATA/ATAPI Controllers" (B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel") (C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!! ***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps. You are writing too close to the edge, write no further than 4300MB, change it. You are using really bad media, I suggest either Taiyo Yuden or Verbatim. SOny and Fuji are fine but only if they are made in Japan. Try that and good luck
Thanks so much for the reply. I just downloaded the the 2.FA firmware and when I double click it, it says "Targe NEC ND-3500A is not found correctly" for the dma part, I have both dma's turned on for primary and secondary ide. === Scsi-Device-Map === CdRomPeripheral : TDK CDRW121032 atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-M1302 atapi Port 1 ID 1 DMA: On DiskPeripheral : WDC WD2000JD-00GBB0 02.0 viamraid Port 2 ID 0 DMA: Off The WDC WD2000JD is my western digital 200gig sata hard drive. Also my dvd burner is connected with a usb2.0 cable, that is why its not showing up on the same ide ports. thanks in advance.
RavenX123 Because your firmware is so far behind, you may have to start with the oldest version listed at the link, updating to it first, and getting that one to take, then try the latest version. Had to do it that way with my lite-on. I call it the Progressive firmware update method. PFUM kinda sounds like puff em. AD site highlites it, but the term means something else here.
Yeah I've heard of that happening, do what MaxBurn says. And it doesn't matter that it's just your HD. It still needs to be on DMA, or else it'll rip really slow. And becasue it's so slow there migh actually be errors if you decide to multi task, or so I've heard.
