I have a brand new computer laptop by dell, I have Nero 6 on it and DVD43 i can encrypt the DVD but then when i go to burn it it says Error, Can someone tell me what happend or what i need to do to get this to work? I have the newest up to date of Nero 6.
hi...let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar. You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 10/19/2005 6:46:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero API version: 6.6.0.0 Using interface version: 6.6.0.1 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\NeroVision Recorder: <_NEC DVD+-RW ND-6650A> Version: 102C - HA 1 TA 0 - 6.6.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6650A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047960kB) Free physical memory: 365MB (374448kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.11.2005 NeroAPI 10:50:08 PM #1 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 10:50:09 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:50:09 PM #3 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD+-RW ND-6650A running 10:50:09 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 10:50:09 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 10:50:09 PM #6 Text 0 File Burncd.cpp, Line 3119 Turn on Disc-At-Once, using DVD media 10:50:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 1445359 (321:11.34, 2822MB) 10:50:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 10:50:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 2310 Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD+R9 Double Layer 10:50:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:50:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1445360 (1445360) = #1445360/321:11.35 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1445360 blocks [_NEC DVD+-RW ND-6650A] -------------------------------------------------------------- 10:50:09 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1045 Prepare recorder [_NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2960097280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1445360 | lead-out | 1 | 0x00 | 0x41 10:50:11 PM #13 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:50:11 PM #14 Text 0 File Burncd.cpp, Line 4135 Cache writing successful. 10:50:11 PM #15 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:50:11 PM #16 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 10:50:11 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2471 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:50:11 PM #18 Text 0 File DVDPlusDualLayer.cpp, Line 383 Disc finalized, LBA total Image size: 1445360 (2822MB), Last LBA L0: 722687 (1411MB) 10:50:43 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 465 L0 Data Zone Capacity set to 722688 (B0700h, 1411MB) -> OK, confirmed setting 10:50:43 PM #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 490 Burning Layer 1 10:50:43 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 498 Start writing layer 1 at address 0 (0h) 10:50:43 PM #22 SCSI -1066 File Cdrdrv.cpp, Line 1175 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02DF6000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 10:50:43 PM #23 Text 0 File DVDPlusRW.cpp, Line 628 Start write address at LBA 0 DVD high compatibility mode: Yes 10:58:42 PM #24 CDR -1206 File DVDPlusDualLayer.cpp, Line 1666 Burning Layer 2 10:58:42 PM #25 Text 0 File DVDPlusDualLayer.cpp, Line 1673 Perform layer 1 to 2 jump before writing at address 722688 (B0700h) 11:07:03 PM #26 Text 0 File WriterStatus.cpp, Line 116 <_NEC DVD+-RW ND-6650A> start writing Lead-Out at LBA 1445360 (160DF0h), lenght 0 blocks 11:07:04 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 11:08:24 PM #28 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 4:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 10/19/2005 6:45:57 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [15.11.2005]------------------------------------ 22:50:09 Robot error messages from: ====== *** NeroAPI, History File *** ======
I did try several times to do this and when i though i finally got it it didn't work this has puzzled my brain for hour on end each and every day, Please help me!!!
This line: means you have Roxio drivers installed and they conflict with Nero. There is a zapper program to completely remove Roxio. Let me see if i can find that link. http://www.downloadjunction.com/product/store/15199 It's on the left hand size of the page Roxio Zap. your version of nero is behind, it is not up to date. The latest 6x vers is 6.6.0.18 looks like the old vers of Nero doesn't recognize your drive. New version should fix that. Your firmware is up to date for the NEC drive. According to the log, your burn of a DVD9 was sucessfull. Did it come out ok? Sorry if i jumped in on this one Creaky. You can point out all the things i missed. (see first one of creakys minons takes a look at the log, then we call for help when we get stuck)
I have Roxio 8 and Nero 6, But they should work together as long as I dont have them open at the same time, So do I have to unstall roxio 8 then or what do i do??? I had 7 but that didnt work on my pc so I went back to 6, But I cant burn dvd's with roxio 8 for some reason or else it will bog my computer down. How do i get this nero 6 to work for burning dvd's???
@MaxBurn - - lol, you're doing good young padawan @DJBrad187 - follow MaxBurn's advice/analysis - we see gazillions of these logs every day, Nero just needs a few tweaks, and you'll be good to go
post latest section of logfile so we can see if there's anything left to tweak after you've made the requested changes.. we gotta rule out the basics...
A couple of quick things. You say you only got half the movie, and that sounds like the program only wrote up to the layer break (when a DL goes from 1 layer to the next). I heard that Nero 6x had a problem getting the transition correct and the soulution to that one was either go to Nero7 which supposedly fixed that problem, or use DVD Decrypter ISO Read/Write for DL discs. As far as Roxio goes, it seems like you have to decide which program you want to keep. Most keep Nero and let Roxio get completely removed. If you try to keep both on your system, Nero usually has conflicts, meaning it doesn't work properly if at all. As creaky said, if you post your last burn log, we can see if there is anything left. That also means we are very near to fixing this problem. It is narrowing down to media, or hardware as we have fixed most of the software issues [bold](except for the Roxio issue, and your upgrade of Nero)[/bold]. Stick with it DJBrad187, we are almost there. I am gonna have to head off to work soon (12hr nightshift) but Nero Master Creaky never sleeps, and even when he does, he is probably dreaming about fixing Nero burn logs There are lots of other good nero troubleshooters here also, and many will jump in if they see something to fix. A burn log is the best way to see issues/problems/possible problems. You are not cursed, many thousands of ppl are burning away, and you will be too. Nero upgrade, media, and Roxio conflict, are things that could very well be the main/only problem you have left preventing you from getting a successfull burn.
I will try these things and post my log tomorrow when i get home from work. I did delete my dvd 43 free and take your advice and downloaded the dvd encrypter, I will keep you posted and thanks for the help so far i appreciate it. Is DVD Encrypter easy to use?? How does it work I havent tried it Yet.
Decrypter is easy to use. Here is the AD guide on using it for small movies, (ones that fit on a DVD5 without shrinking. http://www.afterdawn.com/guides/archive/small_dvd_2_dvdr.cfm It can be called up for the burn in Shrink when you select the target, just click on the pull down arrow and it says create ISO image and burn with Decrypter or something like that. (im at work, so cant pull up shrink here). on this guide, it shows how to use shrink, but the image for shrink looks like the old version. It should have the option for create ISO image and burn with Decrypter, or you can select Nero for the burn. Here's the shrink guide. http://www.afterdawn.com/guides/archive/dvd9_to_dvdr_with_dvd_shrink_page_3.cfm I had it land in the middle of the guide just to show the target device option. There are some other guides out there let me see if i can find them. Here is fastfranks guides. They are animated. http://www.dvdplusvideo.com/tutorial012.html http://www.dvdplusvideo.com/tutorial002.html and the homepage for that has lots of good guides and stuff: http://www.dvdplusvideo.com/ Even though DVD Decrypter and DVD Shrink are no longer updated, i use these programs all the time. The guy who made shrink went off to work for Nero and made Nero Recode. Shrink still looks and feels better to me. Its much better than a 1 click transcoder as i have more options, and can select what i want to keep or loose. If you are only using decrypter and shrink, you may have problems decrypting some Sony movies. AnyDVD is a great program that takes the place of DVD43, and it is constantly updated. Its not a free program, but does have a 21 day free trial period. It will handle any movie out there. Good luck, and post back on your progress.
I found another guide on Decrypter. It is animated also: http://www.dvdshrink.info/dvd-decrypter.php That should give you some reading material to scan thru.
I need your help again, I'am trying to take your advice and delete Roxio 8 but it will not let me delete the files out of my c drive and It does not show up in add or delete programs! What do i do guys! I have run the Roxio zapper but that did not remove Roxio! How do i get this program off my computer for good??
I think we are going to have to call in creaky on this one. Usually the zapper program takes it all out. You said it doensn't let you delete the files from your c drive. What doesn't let you delete it? Did the zapper run and not remove the files? Here is a link to another zapper, it may be the same one, but it's from a different site. http://www.microadvantage.net/utilities/index.php?details=30#A30 Give that one a try. If that doesnt work, please give details as to what program prevented you from deleting Roxio files. And if you have Nero Info tools (under the tools section on Nero start smart) run it, and post the log. It does a good job of showing drivers on the system, and we can see if Roxio is still trying to hide on your PC. Run the other zapper first, it may work where the other one didn't. I didn't DL it, so it could be the exact same program as the other one, but it's worth a try. Maybe creaky has a magic way of exorcising Roxio from a PC. I bet it involves chicken blood.
That did work! Thanks alot i really appreciate the help!! I'am gonna start from new and just install Nero 6 and after I do all of that I will let you know how it works, If it does work.
Awwww creaky, and i thought you used some voodo or something. Glad to see you are burning again DJBrad187. Another laser back in action! Thanks for the help creaky. I can get most of the obvious stuff, but i know there are things in a Nero log that i have no clue as to what's going on. Its good to know creaky, and other members of AD are out there waiting to jump on the really hard fixes. It's the AD Nero brain network.
