I need help someone Pleze. My Pc crashed and I had to reinstall software. I'm using Windows XP. Dvddcryptor/dvdshrink/Nero. The Image is created as it should but everytime I try to burn the DVD i get write error. I have waste 10 dvd's trying to burn. Error mssg I 03:35:03 Writing Image... W 03:35:07 Failed to Write Sectors 19104 - 19135 - Logical Unit Communication CRC Error (ULTRA-DMA/32) Help
Hi, CRC Error meant your dvd media got problem. What kind of dvd disk are you using by the way? Are you using memorex or princo? Or perhaps you are using dvd media made in Taiwan.? Change your dvd media to verbratim, taiyo yuden, fuji, or maxell that are made in japan not taiwan. At the same time upgrade your dvd writer firmware by using the link below. http://forum.rpc1.org/portal.php I hope that will solve your problem.
Didnt quite follow that. Is there a problem with my DVD writer itself? I have a sony DVD RW DW-221 vbys2. I didnt have a problem until I reloaded everything. I use decrptor fine, shrink appears to work but every time I try to burn I get a wright error. I went to the firmware site but it said no updates available. What am I missing. Did the service pac2 update change some settings
michaelrf, I think you have not answer my question. What kind of dvd media are you using? Because that will be the problems here.
Listed below is my latest error message. i'm using Phillips and JVC disk neither is working. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM Nero Version: 6.6.0.8 (Nero Express) Recorder: <SONY DVD RW DW-D22A> Version: BYS2 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD RW DW-D22A >Version: BYS2 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IBM-DTLA-307045 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 1 ID 0 DMA: On CdRomPeripheral : LG CD-RW CED-8080B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SONY DVD RW DW-D22A D: CDRom0 LG CD-RW CED-8080B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 383MB (392496kB) Free physical memory: 103MB (105480kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.11.2005 Burn DVD Image 9:33:48 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 9:33:48 PM #2 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DW-D22A running 9:33:48 PM #3 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 9:33:49 PM #4 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286028 (508:00.28, 4464MB) 9:33:49 PM #5 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 9:33:49 PM #6 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: SONY DVD RW DW-D22A, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 9:33:49 PM #7 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:33:49 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2286029 (2286029) = #2286029/508:0.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286029 blocks [SONY DVD RW DW-D22A] -------------------------------------------------------------- 9:33:49 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DW-D22A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681787392, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286029 | lead-out | 1 | 0x41 | 0x00 9:33:49 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 9:33:49 PM #11 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 9:33:49 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 9:33:49 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 6x (8,310 KB/s) 9:33:49 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:33:49 PM #15 Text 0 File Cdrdrv.cpp, Line 8442 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MCC..... Media type ID: 003 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 43 43 00 00 - 00 00 00 30 30 33 00 38 ...MCC.....003.8 23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 9:33:49 PM #16 Text 0 File DVDR.cpp, Line 5478 Drive: SONY DVD RW DW-D22A Book Type request [LO]: DVD-ROM Changing the Book Type was finished successfully, return code 0 9:33:49 PM #17 CDR -1207 File DVDR.cpp, Line 4933 Book Type automatically set to: DVD-ROM 9:33:49 PM #18 Text 0 File DVDPlusRW.cpp, Line 638 Start write address at LBA 0 DVD high compatibility mode: Yes 9:34:31 PM #19 SCSI -1024 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03260000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x4A 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x08 0x03 9:34:31 PM #20 CDR -1024 File Writer.cpp, Line 311 Communication failure 9:34:32 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:34:32 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:34:35 PM #23 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 9:35:49 PM #24 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 9:35:49 PM #25 Text 0 File DVDR.cpp, Line 5478 Drive: SONY DVD RW DW-D22A Book Type request [LO]: DVD+R Changing the Book Type was finished successfully, return code 0 9:35:49 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 6x (8,310 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (094), size=52464 bytes, created 11/13/2005 7:22:18 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1035), size=21913 bytes, created 11/13/2005 7:22:18 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:00:00 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
michaelrf, First of all, your nero version is too old update to 6.6.0.18. Second, your burner doesnt like the dvd media that you are using. Please change your dvd media to some quality dvd media like verbratim, taiyo yuden, fuji or maxell that is made in Japan not Taiwan. For god's sake stop using Phillips and JVC disk because they are junk dvd media. After updating your nero to 6.6.0.18, open startsmart and choose copy and backup and click on burn image to disk icon.
Hi there, http://forum.rpc1.org/dl_firmware.php?download_id=1944 Latest firmware is BYS3. Humm I can't find that version on the Sony Site ! 6x is a weird speed Keep it at 4x MAX, or even 2.4x, when testing burning issues ! See what Nero has to say about this error http://ww2.nero.com/nero6/en/FAQs_Error_Messages.html#12 I think those are Roxio Packet Writing drivers, Get rid of that stuff. Same goes with Nero InCD, it will cause you more problems that pleasure. Good Luck !
I have tried everything. This is my most current error message. Can anyone help. I get this when I try to burn the iso image using dvddecrytor W 18:14:59 Retry Failed - Invalid Address For Write W 18:14:59 Retrying (19 of 20)... W 18:14:59 Retry Failed - Invalid Address For Write W 18:14:59 Retrying (20 of 20)... W 18:14:59 Retry Failed! - Invalid Address For Write E 18:15:01 Failed to Write Sectors 56032 - 56063 - Logical Unit Communication CRC Error (ULTRA-DMA/32)
