hey guys, i am having problems with burning dvds on my burner. i would use dvd decrypter, shrink, and nero to burn my dvds, but after burning to about 45%, it would give me an error message and the dvd r would pop out of my burner leaving the burning process to be unfinished. i use the top quality dvd rs such as sony, tdk, and such and it would still do the same thing. my speed of burning is at average. i dont know what's going on because this used to not happen at all but recently i just could not get it to burn. is there anyone out there that can help me with this problem. if you could i would appreciate it very much.
hi, version 1.20 of your firmware is here - http://www.pioneeraus.com.au/computer/dvdwriters/dvr108/support/firmware.html
An easy way to check for firmware updates for your burner is to open up Decrypter>Click Tools>Drive>Check for firmware updates.... It will tell you what your current version is when it opens your browser to the firmaware index page.
hey guys. i already udated the firmware and it still does the same ol thing. one thing i havent tried yet though, after updating it, do i have to restart my computer in order for it to kick in?
that would be wise. Long time no hear zippyd, hows those long hours going.I made my decision concerning the revamp is that suitable to you.
It's wise to reboot your PC after any kind of install or uninstall. Helps things to settle in. Drew- I read that thread...
i tried restarting the computer and after getting to about 47% of the burning process, the error message came out and stated that there was an internal failure. you guys know anything about what i could do to get this problem fixed?
let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar. You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
it says something like this: 4:54:38 AM #124 CDR -1061 File Writer.cpp, Line 311 Internal target failure 4:54:38 AM #125 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:54:38 AM #126 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 4:55:08 AM #127 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 16x (22,160 KB/s) 4:55:08 AM #128 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 4:55:08 AM #129 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/19/2004 8:41:48 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 1/3/2003 1:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [18.11.2005]------------------------------------ 04:50:30 Robot error messages from: ====== *** NeroAPI, History File *** ======
that's only part of the log...but, already from what i can see there...ur burning WAYYYYYYYYY too fast~ 16x for burns on a pioneer is NOT good, i have the dvr-109...while i do burn fast sometimes, from my experience with pioneers, they have the ability to burn faster than many other drives; however, the quality at those speeds are not very good... also, what kind of media are you using for your burns? brand and rated speed would be good to help u further... docTY~
