Ok can someone PLEASE help me! I have a LG GSA-4082B and it was working fine b4 my last format! I dont see what i might have done wrong. Nero burns a little bit and then i get an error (usually SCSI Command Aborted) I have tried the following to resolve the issue:- - Uninstall the drive, and let windows pick it up after reboot - Updated IDE drivers - Updated ASPI layers - Tried to burn with other software (WinAVI, DVD Decrypter, Roxio) - Remove the cabling and made sure they are plugged in properly Here is the latest log from nero: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 18/11/2005 13:29:56 Nero Version: 6.6.0.13 Internal Version: 6, 6, 0, 13c Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4082B E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 479MB (490992kB) Free physical memory: 120MB (123056kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.11.2005 UDF/ISO compilation 14:00:49 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 14:00:49 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 14:00:49 #3 Text 0 File Isodoc.cpp, Line 6194 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 14:00:49 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 14:00:49 #5 Text 0 File Reader.cpp, Line 127 Reader running 14:00:49 #6 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4082B running 14:00:49 #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 14:00:49 #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 14:00:49 #9 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 14:00:49 #10 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1050143 (233:21.68, 2051MB) 14:00:49 #11 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 14:00:49 #12 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 14:00:49 #13 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 14:00:49 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1050144 (1050144) = #1050144/233:21.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1050144 blocks [HL-DT-ST DVDRAM GSA-4082B] -------------------------------------------------------------- 14:00:49 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2150694912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1050144 | lead-out | 1 | 0x41 | 0x00 14:00:49 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 14:00:50 #17 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 14:00:50 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 14:00:50 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 14:00:50 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 14:00:50 #21 Text 0 File DVDR.cpp, Line 2267 Recording mode: Sequential Recording Mode 14:00:50 #22 Text 0 File Mmc.cpp, Line 21469 Set BUFE: Buffer underrun protection -> ON 14:00:50 #23 Text 0 File DVDR.cpp, Line 2421 Start write address at LBA 0 DVD high compatibility mode: Yes 14:00:50 #24 Text 0 File Cdrdrv.cpp, Line 8438 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 14:01:03 #25 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D10000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x32 0x4D 0x03 0x0C 0x0C 0x00 14:01:03 #26 CDR -1135 File Writer.cpp, Line 311 Write error 14:01:03 #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 14:01:03 #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 14:01:04 #29 Text 0 File DVDR.cpp, Line 2658 EndDAO: Last written address was -1 14:01:06 #30 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02 File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 09/09/2005 16:34:28 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [bold]PLEASE HELP !!!![/bold] PS I did have a cd rewriter (which works fine) plugged in which i removed earlier to see if it was causing any problems as it was on the same IDE as the dvd burner (i.e DVD Writer was master and CD writer was slave)
Looks like you are about 8 firmware updates behind. Current is A209 and yours is A201 Go here to update: http://forum.rpc1.org/dl_result.php?kaj=1&isces This may help. For some reason this does not look right to me, but I am new to reading logs: I am sure that someone like creaky will jump in shortly. You might want to try and free up some system resources as well.
[bold]Firstly let me thank you for the quick response.. its nice to know that there are people out there that take the time to help others!!![/bold] Secondly can i say that i updated my firmware and rebooted.. and then tried burning the same film that i wasted 6 discs on and guess what? IT WORKED!!!!!!!!!! BURN PROCESS SUCCESSFULL!!!!! Thankyou soooooooooooooooo much 9mmruger1 !!!!!! I dont know why i didnt think to update my dvd firmware when i updated my cd writer :S Anyway, i dont know what i would have done without u!!! Thanks
