[bold]Hi there, I'm having problems burning backup dvds. I'm using dvd to decrypt them then dvd to shrink to compress and burn them on a 4.5gb disk. This is the error message I get. I would greatly appreciate any help with this matter. Thanks![/bold] Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.16 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 16b Recorder: <DVDRW IDE1004> Version: 0151 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 1 DMA: Off CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === DVDRW IDE1004 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 765MB (784368kB) Free physical memory: 398MB (407588kB) Memory in use : 48 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.11.2005 NeroAPI 12:05:38 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 12:05:38 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 12:05:38 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 12:05:38 AM #4 SCSI -1066 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0ADF4E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 12:05:39 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 12:05:39 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:05:39 AM #7 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE1004 running 12:05:39 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:05:39 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:05:39 AM #10 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:05:39 AM #11 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2202159 (489:22.09, 4301MB) 12:05:39 AM #12 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 12:05:39 AM #13 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: DVDRW IDE1004, Media type: DVD-R Disc Manufacturer: CMC MA - G. AF1 Disc Application Code: 64, Disc Physical Code: 193 12:05:39 AM #14 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:05:39 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [DVDRW IDE1004] -------------------------------------------------------------- 12:05:39 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [DVDRW IDE1004] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2202160 | lead-out | 1 | 0x41 | 0x00 12:05:39 AM #17 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 12:05:39 AM #18 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 12:05:39 AM #19 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 12:05:39 AM #20 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 12:05:39 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:05:39 AM #22 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 12:05:39 AM #23 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON 12:05:39 AM #24 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 12:05:39 AM #25 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:06:42 AM #26 Text 0 File Cdrdrv.cpp, Line 1286 00:06:42.154 - DVDRW IDE1004\H1 T0 : Queue again later 12:22:39 AM #27 SCSI -1114 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0ADF4E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 12:22:39 AM #28 SCSI -1064 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00CD0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x0D 0x7A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x21 0x00 12:22:39 AM #29 CDR -1114 File Writer.cpp, Line 311 Reset occurred DVDRW IDE1004\H1 T0 12:22:39 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:22:39 AM #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:22:39 AM #32 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 883391 12:22:39 AM #33 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 4x (5,540 KB/s) 12:22:39 AM #34 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 12:22:39 AM #35 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/23/2001 2:00:00 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/4/2005 7:41:04 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)
- looks like this drive is yours further down this page - http://www.iomagic.com/Firmware/FirmwareDownload.html - and your firmware is up to date - DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm - oh God, you're using some of the most awful, atrocious utter rubbish dvd media there is. get decent media, and glance at my signature for reasons not to use CMC media - see previous comment - your ATAPI drivers aren't listed here, the DMA fix above will sort this out So... your problems are down to crap media and DMA being OFF. crap media such as that are the things that make your devices drop out of DMA into PIO mode...
[bold]I tried uninstalling and reinstalling the Primary and Secondary IDE Drives...this is what happened... PRIMARY IDE CHANNEL Device 0-Ultra DMA MODE 5 Device 1-Pio Mode SECONDAR IDE CHANNEL Device 0-Ultra DMA MODE 2 Device 1-Not applicable Looks like it still hasnt switch over to the DMA mode on for the primary IDE channel for device 1, even though i det it to switch to dma if available and uninstalled and reinstalled both IDE channels....any other ideas on how I can get the DMA on???? Thanks for the help.[/bold]
this is a long short, maybe your IDE cable is a little prehistoric - see the 2 main piccies here.... - http://www.pcguide.com/ref/hdd/if/ide/confCable80-c.html
Problem: NERO 6 FREEZES AT LEAD IN And I mean freezes, must reset and the history file isn't even updated! I want to burn a 2.7g to verbatim dvd. I don't think it matters what I'm trying to burn, Nero is suddenly unable to burn dvds. It burns cds fine. My DMA is on, installed aspi drivers, i already run the zapper for incd and roxio, already uninstalled, zapped and reinstalled nero. still freeezes. It suddenly started to happen 3 weeks ago. Could it be a windows update?? I know i don't have a log, but can anyone help (my HD is full!)???
@Jaco82 - re the lead-in errors, see here - http://club.cdfreaks.com/showthread.php?t=155492 (they link back here to afterdawn. see if they help. but as the HD being full - erm you'd best address before you do anything else or you'll never burn diddly squat!
@waterlog When you say you tried uninstalling and re-installing the slave drive, did you mean uninstalled and re-booted to let Windows re-install it? @creaky Tentatively.. since the drives are on the same cable would that not indicate that the cable was o.k. ? @waterlog, if you want to open up the PC to check cables, may as well interchange the HD cable and the DVD writer cable to verify?
@attar - i know..just clutching at straws at the moment (or IDE ribbon cables) as don't see why the DMA fix isn't 'fixing'
@creaky Do the PC bios settings (should be "automatic"? in this case) for the device, control the ultimate settings viz PIO DMA or does Windows decide, when it finally kicks in, that the device should be set appropriately?
In my case, as the PC powers up,(long before Windows starts)I press the 'DEL' key and the bios menu comes up.
Changing the IDE cable to an 80 pin and switching the bios setting to all ready AUTO worked! Thanks for the help people..truely appreciate it.
