Tutorial: How To Burn XBox360 Games
Recommended: How to burn Xbox 360 games (.DVD/.ISO) with ImgBurn (free software).
#626
10 Dec 2006 @ 16:07
fazes23
Suspended due non-functional email address
i have giganews and newzleecher. works marvelous ;) usually takes me 1hour n 10 mins for each 360 game.
#627
11 Dec 2006 @ 7:10
Hello All....
i have a memorex DVD+R DL.
do any one allready tried burrning on it???
let me know...
Thanks
i have a memorex DVD+R DL.
do any one allready tried burrning on it???
let me know...
Thanks
X360 Xtreme Patch 4.2b
#628
11 Dec 2006 @ 8:36
supermati
Junior Member
Hi, I read the whole thread, but I'm on a headache right now...
I have my original NBA2K7 game, but it's kinda scratched, so I want to copy it so it works fine again.
I will do the Flash Hack, but I'm confused, as I see there are a lot of firmware versions to put on the Xbox360, What one is recommended?
And also, to make the copy work:
I also see there are a lot of methods going on, there's this method that requires the burner to be opened and change disk while it does something.
Then there's CloneCD, DVD Decrtypter, the tutorial on this website, and a lot of softwares, I just can't understand what way is better.
Can anybody help me please?
I hate to bother.
Thank you.
I have my original NBA2K7 game, but it's kinda scratched, so I want to copy it so it works fine again.
I will do the Flash Hack, but I'm confused, as I see there are a lot of firmware versions to put on the Xbox360, What one is recommended?
And also, to make the copy work:
I also see there are a lot of methods going on, there's this method that requires the burner to be opened and change disk while it does something.
Then there's CloneCD, DVD Decrtypter, the tutorial on this website, and a lot of softwares, I just can't understand what way is better.
Can anybody help me please?
I hate to bother.
Thank you.
#629
11 Dec 2006 @ 9:18
supermati
Junior Member
Oh, I also have this guy that tells me that with the last firmware available the 360 reads every copy, without doing patches, please inform me.
#630
12 Dec 2006 @ 6:01
My personal experience:
I have a Sony DRU700A writer (which is in fact a LiTe On).
With the original firmware and Ritek DVDs I got a failure rate of one coaster every three.
Since I updated with the latest available firmware, which allows me to set the booktype to "DVD ROM" and switched to Verbatim DVDs, I got no further coaster at all.
I have a Sony DRU700A writer (which is in fact a LiTe On).
With the original firmware and Ritek DVDs I got a failure rate of one coaster every three.
Since I updated with the latest available firmware, which allows me to set the booktype to "DVD ROM" and switched to Verbatim DVDs, I got no further coaster at all.
#631
12 Dec 2006 @ 15:41
hi all.....
me again...
i forgot to tell you guys that i have SAM-th-s943 the ms-25 with the xtreme v4.2b and i wanted to change it to v4.2b
its says:
status = 51 should be = 70
I'm using a USB boot to do that.
when I'm changing the USB port it say:
status = 7f should be = 70
Ive got all my cables removed except the sata that go to the x360dvd.
i tried to use the enable0800 disc. but i'm not sure that i burn it right....
i tried to burn a game on a memorix DVD+R DL without success...
I have lot of computers experience, cables, bios, firmwares.
Please Help....... :]
me again...
i forgot to tell you guys that i have SAM-th-s943 the ms-25 with the xtreme v4.2b and i wanted to change it to v4.2b
its says:
status = 51 should be = 70
I'm using a USB boot to do that.
when I'm changing the USB port it say:
status = 7f should be = 70
Ive got all my cables removed except the sata that go to the x360dvd.
i tried to use the enable0800 disc. but i'm not sure that i burn it right....
i tried to burn a game on a memorix DVD+R DL without success...
I have lot of computers experience, cables, bios, firmwares.
Please Help....... :]
#633
14 Dec 2006 @ 5:46
Hi guys,
Just want to chime in on this great stuff. i have flashed my drive and have been getting tons of games from the newsgroups. all has been working really well for me.
however, this tuorial seems to based on Downloading a game and then patching and burning. what if you just want to copy a store bought 360 disk - is there a better version then the clevermod method? and does anyone know of a good cheap dvd drive that you can take apart and access the laser as is described in the clevermod tut?
Just want to chime in on this great stuff. i have flashed my drive and have been getting tons of games from the newsgroups. all has been working really well for me.
however, this tuorial seems to based on Downloading a game and then patching and burning. what if you just want to copy a store bought 360 disk - is there a better version then the clevermod method? and does anyone know of a good cheap dvd drive that you can take apart and access the laser as is described in the clevermod tut?
#634
14 Dec 2006 @ 7:43
Originally posted by minispark:http://tinyurl.com/2yl7s
were can i download ss merger from
I don't Usenet, it uses me.
#635
14 Dec 2006 @ 22:52
Binkys
Junior Member
Originally posted by naveens:
Hi guys,
Just want to chime in on this great stuff. i have flashed my drive and have been getting tons of games from the newsgroups. all has been working really well for me.
however, this tuorial seems to based on Downloading a game and then patching and burning. what if you just want to copy a store bought 360 disk - is there a better version then the clevermod method? and does anyone know of a good cheap dvd drive that you can take apart and access the laser as is described in the clevermod tut?
well dude, there is an alternate way.. it requires purchasing a SH-D162c <there are other versions> drive and flashing it with Kreons firmware.. then you'd be able to use XboX360/Xbox backup creater and directly rip the game and burn it without having to patch/stealth etc.. easiest method and it works flawlessly.. only prob is finding those drives for cheap and flashing it.. unless you're perfectly fine with the process.
believe the best drive.. <most ppl agree> is the 111d? i think its pioneer.. someone can back me up on that.
#636
15 Dec 2006 @ 5:45
Originally posted by Binkys:Ive just found a Samsung SH-D162C pre flashed with Kreons Firmware v0.8 for EUR 24.95
well dude, there is an alternate way.. it requires purchasing a SH-D162c <there are other versions> drive and flashing it with Kreons firmware.. then you'd be able to use XboX360/Xbox backup creater and directly rip the game and burn it without having to patch/stealth etc.. easiest method and it works flawlessly.. only prob is finding those drives for cheap and flashing it.. unless you're perfectly fine with the process.
believe the best drive.. <most ppl agree> is the 111d? i think its pioneer.. someone can back me up on that.
http://www.stegen.com/product_info.php/p...e0f80e7413754eb
The site is based in the Netherlands but i could one shipped to the UK for a total of EUR 37,95
so £25.45
$49.70
-Josh
This message has been edited since its posting. Latest edit was made on 15 Dec 2006 @ 5:47
#637
15 Dec 2006 @ 6:38
you can pick the sammy drives up for about £12 in the uk and add 6 quid for postage even if you buy 10 within the uk again ..
the pioneer 111d for burning does indeed seem to be rock solid
the pioneer 111d for burning does indeed seem to be rock solid
This message has been edited since its posting. Latest edit was made on 15 Dec 2006 @ 6:39
#638
15 Dec 2006 @ 9:22
Simple Tutorial On How To Flash The Samsung Drive;
--------------------------------------------------
http://forums.xbox-scene.com/index.php?showtopic=555230
Im gonna have to go out out and by the samsung drive now,
and a pioneer 11d burner (iv already got a dvd-dl but cant be bothered with coasters)
-Josh
--------------------------------------------------
http://forums.xbox-scene.com/index.php?showtopic=555230
Im gonna have to go out out and by the samsung drive now,
and a pioneer 11d burner (iv already got a dvd-dl but cant be bothered with coasters)
-Josh
#639
15 Dec 2006 @ 9:43
Binkys
Junior Member
Originally posted by JOSh765:awesome, glad my little bit of info helped :)
Simple Tutorial On How To Flash The Samsung Drive;
--------------------------------------------------
http://forums.xbox-scene.com/index.php?showtopic=555230
Im gonna have to go out out and by the samsung drive now,
and a pioneer 11d burner (iv already got a dvd-dl but cant be bothered with coasters)
-Josh
#640
15 Dec 2006 @ 9:52
indeed a great bit of info for the newbs in mind .... it is always great when your tutorials pop up out of the blue from certian places as it gives you a sense of achievment as this is what all the forums are about .....HELPING and SHARING the knowledge :)
#641
15 Dec 2006 @ 11:45
You guys know that this tutorial isn'y exactly up to date. If you flash you drive with the newest firmware you DON'T need to get a dual layer dvd burner such as a pioneer to change the booktype. The newer firmware has better media detection and such so changing the bookype isn't need. Also with the newest firmware with the samsung you can also change the speed of which the 360 reads the disk. You guys should read up more on xbox-scene.com's forums and xboxhacker.net's forums as well. Also if you are downloading a game from a newsgroup, make sure that the game is complete and if it isn't ho to use the par2 files to repair the game as well. All these noobs make me want to kill myself...
AKA Old Map Mods on Xboxlive.
#642
15 Dec 2006 @ 12:07
ok deafy why dont you wrfite us a new tutorial easy to use and uptodate tutorial please
-Josh
-Josh
#643
16 Dec 2006 @ 9:01
what are these newsgroup things by the way which iv heard people talk about and how they can download a game in like an hour?
are they jsut like torrents without the sharing?
how could i set 1 up? and are they free?
-Josh
are they jsut like torrents without the sharing?
how could i set 1 up? and are they free?
-Josh
#644
16 Dec 2006 @ 9:08
you pay for the privelage ... ive never tried them personally as i like to learn the process of flashing and creating backups
#645
16 Dec 2006 @ 9:16
OK I've registered at Giganews and have downloaded newsleecher v3.7 and have an account at both I'm on a free trial with Giganews. When I try to log into Newsleecher it keeps comming up -Error- Unable to go online -Solution- There are no enabled server connection to activate. Make sure you have setup a usenet server correctly before connecting just not sure whats going on anybody have any ideas?
#646
16 Dec 2006 @ 9:53
Originally posted by Turboz:make sure you have added a connection in the manager section
OK I've registered at Giganews and have downloaded newsleecher v3.7 and have an account at both I'm on a free trial with Giganews. When I try to log into Newsleecher it keeps comming up -Error- Unable to go online -Solution- There are no enabled server connection to activate. Make sure you have setup a usenet server correctly before connecting just not sure whats going on anybody have any ideas?
use this has the server address:
news.giganews.com
also, make sure you have entered the username that giganews has provided to you and the password that you created. After you enter all of that click OK. after clicking OK make sure the connection you just created has a check next to it.
I don't Usenet, it uses me.
#647
16 Dec 2006 @ 10:23
OK...
I finly Resolve the status = 51 shuold be = 70
nwo im w8ing to my games to get here...
i hope its gonna be fast...
I finly Resolve the status = 51 shuold be = 70
nwo im w8ing to my games to get here...
i hope its gonna be fast...
#648
16 Dec 2006 @ 10:28
When i try run the .exe file to install ss merger v1.6
i get a messgae saying
"The application failed to initialize properly"
how can i get round this problem?
-Josh
i get a messgae saying
"The application failed to initialize properly"
how can i get round this problem?
-Josh
#649
16 Dec 2006 @ 20:29
Binkys
Junior Member
Originally posted by JOSh765:
When i try run the .exe file to install ss merger v1.6
i get a messgae saying
"The application failed to initialize properly"
how can i get round this problem?
-Josh
hmm.. not sure, try 1.7 might just be a corrupt file you got from a mirror or.. i honestly don't know :-p try redownloading it/reinstalling or another version.
This discussion topic is closed. You can't post to this topic.
Share this
