hi, this is the firat time i have put a post on here. Ok i have been burning dvd's for some time now, usually from xvid files without problems. Today for some unknown reason i tried to burn the video files from an xvid I just encoded, all seemed ok until the burn nearly finished and it failed.I tried several times and got the same result. below is the logfile, if anyone can give me any help on this i would be most grateful Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 11:06:00 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.14 Internal Version: 6, 6, 0, 14d Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A102 - HA 0 TA 1 - 6.6.0.14 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <DVD-16X DVD-ROM BDV316G >Version: 0017 - HA 0 TA 0 - 6.6.0.14 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : DVD-16X DVD-ROM BDV316G atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On DiskPeripheral : SAMSUNG SV0813H atapi Port 1 ID 0 DMA: On DiskPeripheral : HDS722580VLAT20 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === DVD-16X DVD-ROM BDV316G E: CDRom0 HL-DT-ST DVDRAM GSA-4163B F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 639MB (654832kB) Free physical memory: 323MB (331228kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.11.2005 UDF/ISO compilation 8:37:48 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 8:37:48 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 8:37:48 PM #3 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:37:48 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 8:37:49 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 8:37:49 PM #6 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4163B running 8:37:49 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3297 First writeable address = 0 (0x00000000) 8:37:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3297 First writeable address = 0 (0x00000000) 8:37:49 PM #9 Text 0 File Burncd.cpp, Line 3230 Turn on Disc-At-Once, using DVD media 8:37:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1853343 (411:51.18, 3619MB) 8:37:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 8:37:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: AN32 - Disc Application Code: 64, Disc Physical Code: 193 8:37:49 PM #13 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:37:49 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1853344 (1853344) = #1853344/411:51.19 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1853344 blocks [HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 8:37:49 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3795648512, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1853344 | lead-out | 1 | 0x41 | 0x00 8:37:49 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:37:49 PM #17 Text 0 File Burncd.cpp, Line 4114 Cache writing successful. 8:37:49 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:37:49 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 8:37:49 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:37:49 PM #21 Text 0 File DVDR.cpp, Line 2316 Recording mode: Sequential Recording Mode 8:37:49 PM #22 Text 0 File Mmc.cpp, Line 21592 Set BUFE: Buffer underrun protection -> ON 8:37:49 PM #23 Text 0 File DVDR.cpp, Line 2470 Start write address at LBA 0 DVD high compatibility mode: Yes 8:37:49 PM #24 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:38:03 PM #25 Text 0 File Cdrdrv.cpp, Line 1288 20:38:03.268 - HL-DT-ST DVDRAM GSA-4163B\H0 T1 : Queue again later 8:46:38 PM #26 SCSI -1061 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03F80000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0x86 CDB Data: 0x2A 0x00 0x00 0x14 0x69 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10 0x32 0x24 0x00 0x0C 0x44 0x86 8:46:38 PM #27 CDR -1061 File Writer.cpp, Line 311 Internal target failure 8:46:38 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:46:39 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:46:39 PM #30 Text 0 File DVDR.cpp, Line 2708 EndDAO: Last written address was 1337791 8:46:39 PM #31 CDR -1061 File WriterStatus.cpp, Line 167 Internal target failure 8:46:39 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 8:46:39 PM #33 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 11:06:00 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 10/9/2005 2:02:44 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:00:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You firmware is out of date, current version is A105. Here is the link ,remember the one for you is A105, not the one that is flashing: http://forum.rpc1.org/dl_firmware.php?download_id=1973 Also you nero is out of date. Current Version is 6.6.0.18, just download packets 1 and 2. The media you are using it not very good. Switch to something like Taiyo Yuden or Verbatim. Sony and Fuji are OK, but only if they are made in Japan.
