My previous posting about this problem has not been responded to and I thought a new subject heading may attract some attention. I am presently using the free version of DVD Rebuilder with CCE SP 2.5 to make a backup copy of a movie contained on a DVD. At present I have 4.07 gigs of files in my work folder and nothing in the output folder. The 4.07 gigs is made up of a number of different types of files mainly D2V, AviSynth Script, ,M2v, FLG etc This is a copy of the log file. [20:38:19] One Click encoding activated... ----------------- [20:38:23] Phase I, PREPARATION started. - "Movie and Menus Only" mode is enabled. - VTS_02: 3,422,105 sectors. -- Scanning and writing .D2V & .AVS files - PREPARE aborted. Aborted. [21:09:59] One Click encoding activated... ----------------- [21:10:00] Phase I, PREPARATION started. - "Movie and Menus Only" mode is enabled. - VTS_02: 3,422,105 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 166,161 frames. -- Building .AVS and .ECL files - VTS_03: 64,047 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 4,444 frames. -- Building .AVS and .ECL files - Reduction Level for DVD-5: 70.8% - Overall Bitrate : 5,083Kbs - Space for Video : 4,234,446KB - Blanking all EXTRA Segments -- Feature before/after: 5,225 / 5,225 Kbs [21:17:17] Phase I, PREPARATION completed in 7 minutes. [21:17:17] Phase II ENCODING started - Creating M2V for VTS_02 segment 0 -- Encoding resulted in no .M2V, retrying. - Creating M2V for VTS_02 segment 0 -- Encoding resulted in no .M2V, retrying. - Creating M2V for VTS_02 segment 0 [21:53:51] One Click encoding activated... ----------------- [21:53:52] Phase I, PREPARATION started. - CCE SP 2.50.1.0 encoder selected. - "Steal Space from Extras" mode is enabled. - VTS_02: 3,422,105 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 166,161 frames. -- Building .AVS and .ECL files - VTS_03: 64,047 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 4,444 frames. -- Building .AVS and .ECL files - Reduction Level for DVD-5: 70.8% - Overall Bitrate : 5,083Kbs - Space for Video : 4,234,446KB - Movie improvement from extra reduction = 1.0% - HIGH/LOW/TYPICAL Bitrates: 5,358/1,996/5,083 Kbs [22:01:24] Phase I, PREPARATION completed in 8 minutes. [22:01:24] Phase II ENCODING started - Creating M2V for VTS_02 segment 0 -- Encoding resulted in no .M2V, retrying. - Creating M2V for VTS_02 segment 0 -- Encoding resulted in no .M2V, retrying. - Creating M2V for VTS_02 segment 0 [22:27:53] One Click encoding activated... ----------------- [22:27:53] Phase I, PREPARATION started. - CCE SP 2.50 encoder selected. - "Steal Space from Extras" mode is enabled. - VTS_02: 3,422,105 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 166,161 frames. -- Building .AVS and .ECL files - VTS_03: 64,047 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 4,444 frames. -- Building .AVS and .ECL files - Reduction Level for DVD-5: 70.8% - Overall Bitrate : 5,083Kbs - Space for Video : 4,234,446KB - Movie improvement from extra reduction = 1.0% - HIGH/LOW/TYPICAL Bitrates: 5,358/1,996/5,083 Kbs [22:32:16] Phase I, PREPARATION completed in 5 minutes. [22:32:16] Phase II ENCODING started - Creating M2V for VTS_02 segment 0 - Creating M2V for VTS_02 segment 1 - Creating M2V for VTS_02 segment 2 - Creating M2V for VTS_02 segment 3 - Creating M2V for VTS_02 segment 4 - Creating M2V for VTS_02 segment 5 - Creating M2V for VTS_02 segment 6 - Creating M2V for VTS_02 segment 7 - Creating M2V for VTS_02 segment 8 - Creating M2V for VTS_02 segment 9 - Creating M2V for VTS_02 segment 10 - Creating M2V for VTS_02 segment 11 - Creating M2V for VTS_02 segment 12 - Creating M2V for VTS_02 segment 13 - Creating M2V for VTS_02 segment 14 - Creating M2V for VTS_02 segment 15 - Creating M2V for VTS_02 segment 16 - Creating M2V for VTS_03 segment 0 [00:13:04] Phase II ENCODING completed in 101 minutes. My question is how do I get the program to resume where it stopped or is there a way of utilising the files that have been created.
yea Ive had DVDRB Pro 1.0x do the same thing to me on a few occassions. Did you happen to have Output to ISO option enabled? In my experience, DVDRB choked and died when outputting to ISO on a few dvds. I tried running the process again but RB refused to accept the files created during Phase II. BTW, running DVDRB w/ Canopous ProCoder 2.x (same problem as kiamain, DVDRB crashed/died/didnt output ISO/dvdfiles after Phase II completed) also happend when I switched to HC encoder
in order to resume load the project/directory again, UNtick *1click* mode and thus switch to *3click* mode now you should be able to find "prepare, encode and rebuild" buttons press encode and the next segment in the *2do queue* should be started finally you will have to press *rebuild* of course good luck
Thanks for your responses. Following the instructions given in the last post I was successful in getting the program to recommence from the point where it previously stopped. However, the program instantly crashes and I get the following error message. AppName: rebuilder.exe AppVer: 1.0.0.300 ModName: unknown ModVer: 0.0.0.0 Offset: 00151d5e I don't think it is a computer fault as I went to the trouble of duplicating the task on another computer and got a crash at exactly the same point.
I have the exact same problem. I'm using CCE SP 2.5 also and i can't get around this problem. I never had this issue with previous versions of DVD Rebuilder. Does anyone have any ideas?
