Hello, everyone i'm new to the forum and i need help with nero. my problem is that when i try to burn my movie to dvd everything work fine until it get to the part for burning the movie on the cd-r disk i get the message saying not enough space and use cd-r which i'm using however the disk hold 700 and the movie may be 703 can someone help me solve this space problem.
It seems there are 2 options here. 1 Make the file not as big. 2 Go into options / expert settings and tweek overburning a bit. This option may not work depending on your burner and the blank disk used.
at the end of the session it said something about overburning and that it can cause problem to my system should this still be done even it it telling you that it may cause my computer have problem later.
What that error is meaning is there may be problems with trying to overburn if you dont go back in and change it back. With you just needing a few meg, in the expert options try first to select the option to make leadout smaler. After the burn of this one disk then go back in and remove the check for that option so it is not doing that on all disk.
i'm sorry but could you please give me step by step on tweaking this overburn process, or should i just try to burn the same movie again and wait for it to ask me do i want to continuing overburning and click the yes button?
Just continue by clicking yes. That should set overburning for just that disk. After it is done burning though go into nero burning rom click file then options then expert settings tab to look and see that it did not stay on overburning.
Well i did what u said and the same happen only this time it didn't say at the end of the burning session do i want to continue overburning. Also you should know that i trying to burn to CD-R which i been doing until i had to reinstall and uninstall nero ultra edition several time because it wasn't recongizing my drive also it is in Mode 2 instead of 1 i've used a serial number from a sony cd-rom that i just brought and updated nero from the old serial # with the new one, here is a description of my cd-rom drive that nero came with that i used my old nero with this cd-rom nero new serial optical drive write compatibility DVD+R DL; DVD+R; DVD+RW; DVD-R; DVD-RW; CD-R; CD-RW DVD write speed DVD+R: 16x; DVD-R: 16x; DVD+R DL: 4x DVD rewrite speed DVD+RW: 8x; DVD-RW: 6x DVD read speed 16 x CD write speed 48 x CD rewrite speed 24 x CD read speed 48 x buffer size 2 MB device connector type EIDE/ATAPI operating system compatibility Windows 2000; Windows XP media included none software included yes plug and play no height 1 5/8 inches width 5 3/4 inches depth 6 3/4 inches warranty 1-year limited brand name Sony manufacturer Sony model name DRU-800A and here is my system descriptions brand name eMachines manufacturer eMachines model name T6524 processor type AMD Athlon 64 3500+ processor speed 2.2 GHz frontside bus 2000 MHz memory 1.0 GB maximum memory upgrade 4 GB memory speed PC3200 memory type DDR SDRAM hard drive capacity 200 GB video memory 128MB shared video hardware ATI Radeon Xpress 200 audio hardware AC '97 6-channel audio modem standard 56K V.92 Wi-Fi capability included (Wi-Fi ready) no Ethernet port yes infrared port no included integrated drives DVD+R DL/DVD±RW; CD-ROM integrated memory card reader yes number of FireWire ports 2 number of parallel ports 1 number of PS/2 ports 2 number of S-video out ports 0 number of serial ports 0 number of USB 1.1 ports 0 number of USB 2.0 ports 7 number of VGA video ports 1 peripherals included keyboard; mouse; speakers operating system Windows XP Media Center Edition 2005 software included yes also just to let you know it came with nerosmart but didn't have the burning-rom that why i install nero burning rom to get the best results possible.
It will depend on the media more then the burner but burners do vary also. If you open burning rom then close the wizard window you will then select file and go down to options you will see this window on the expert settings tab to see these options. That is where you can tweek. After you do get it done remember to go back and reset to default.
ok i had the third box check so make sure the 1st two (2) boxes are checked and after burning process go back and check default to put back to normal operation correct.
Yup. It has to be enable. If you can not get it sorted you might just want to check into a program I have been hearing good things about. Ashampoo has a program called movie shrink & burn 2. I have not tested it yet but have heard good things about it. I just downloaded it to test when I get time. If you reg for there newsletter they will e-mail you a key to unlock it completly for 30 days. That may get you more e-mail then you want in the future so I use e-mail like hotmail that is not my main e-mail.
i just want to say thanks alot whompus you have been a great help, i will try the tweak thing first due to i was checking the wrong boxes and get back with you tomorrow to let you know how things went. thanks again for your timely response and patience. You Rock
