I am trying to burn a multi dvd i have already burnt 8 of them this is the 9th i dont know what is happening at the mo i am ripping with dvd decryptor useing these setting to see if this works "Tools," then "Settings," then click on the "General" tab ." Under "Removal Method," - please change that from "Normal" to "Aggressive." Next, in the "File Mode" tab, Check, "Remove IFO PUO's." Next, go to the "ISO Read Mode" tab and Check, "Remove IFO PUO's" as well. Now let's scoot on over to the "CSS" tab and lQQk to your left to find "Brute Force ~> I/O Key Exchange" and Check that too. Finally, head to the "I/O tad." At the bottom-right I'd like you to put a check where it says "Ignore Read Errors." This will help speed things along by bypassing any tiny scratch-caused errors on the original disc and also some empty files which make it hard for DVD Shrinker to wade through. Finally, (Yea, I know there was a "Finally" before this one BUT this is really and truly the last "Finally", Honest !) Sooo, let's go to the "Device" tab ." Under "Eject Tray after," I like to check both "Read" and "Write" so that if I'm busy doing something and my PC's sound is turned down, the tray's opening alerts me that DVDD's job is done. If you don't want that to happen, then, . . . don't check those boxes, BUT you'll like it better if you do it Soooo, what the hey, . . . Go ahead and put a little checkie-pooh there. That's a good kid, your Uncle ScubaPete LOVES ya for doin' that. Now, click "OK." What we just did was to strenghten DVDD up a bit in both the File and the ISO ripping mode. Now let's get down to the business of ripping this disc. Let's begin by creating a folder for DVD Decrypter. Let's create it somewhere that you'll be able to find it. I put mine on my Desktop calling it, "ALL MY DVD WORK". Then create a second folder with the name we're using for this project. I called mine,"The worst marriage in the History of the World". Now, let's start by "opening" DVD Decrypter, select Mode, ~> ISO, ~> Read then, for "Source," go to wherever your original files reside either your DVD drive OR your HD. For "Destination", point to the folder you just created and then click on the "Disc to Hard drive icon" to activate DVD Decrypter. When it has finished it's job, "open" DVD Shrink, go to, "File" ~> Open Disc Image, "Browse" until you see the folder you backed up / ripped the ISO image too. Now allow DVD Shrink to Analyze the image. Once that is done, I want you to go to "Edit" then "Preferences" and under "Target DVD Size", change the default size from DVD-5 to "Custom". If you are using decent DVD's such as Verbatim, Phillips, TDK OR Taiyo Yudens, type in 4360 MB. If you are using crap such as Princo, Bulk Orange OR Memorex, type in 4100 MB. Even though we're reducing the "Target DVD Size" to put you one the best dyed surface, if you're using crappy media, you still may not get a decent copy while using junky media. It is times like these that pple are forced to change their media as they see all to clearly that media really is all that important. Alrighty then, assuming that you are using decent media, DVD Shrink will have compressed your files and you are now ready to burn to disc. 2 - things, DO NOT USE RE-AUTHOR. If you have some "Red" showing in the "size bar", un-check some extra audio. We need to keep everything as intact as we can so that it will play as well as the original. Secondly, make sure, under "Select backup target", you select, "ISO Image File and burn with DVD Decrypter" OR CopyToDVD. When you work with an ISO image you are getting all of the files, every nuance, the way they were on the original, in the exact order they began. This is the log from the first burn well should i say simulation because this happend to the first burn so i thought i would simulate the burn to see what happend and the same thing happend i am useing TDK disks and burning at 4x LOG Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST RW/DVD GCC-4320B>Version: 1.00 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4320B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4320B D: CDRom0 PIONEER DVD-RW DVR-109 E: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 55574528 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 367MB (376304kB) Free physical memory: 141MB (145236kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.12.2005 UDF/ISO compilation 6:03:08 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 6:03:08 PM #2 DVDREALLOC -22 File DVDVideoCompilation.cpp, Line 1189 File 'VIDEO_TS.VOB' is not referenced and should not be present 6:03:08 PM #3 Phase 115 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation failed 6:03:09 PM #4 Phase 132 File dlgbrnst.cpp, Line 1832 DVD-Video files compliance ignored 6:03:09 PM #5 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 6:03:09 PM #6 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 6:03:09 PM #7 Text 0 File Reader.cpp, Line 127 Reader running 6:03:09 PM #8 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-109 running 6:03:09 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:03:10 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:03:10 PM #11 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 6:03:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2229439 (495:25.64, 4354MB) 6:03:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD DVD) 6:03:10 PM #14 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: TTG02 - Disc Application Code: 64, Disc Physical Code: 193 6:03:10 PM #15 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:03:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2229440 (2229440) = #2229440/495:25.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2229440 blocks [PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 6:03:10 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4565893120, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2229440 | lead-out | 1 | 0x41 | 0x00 6:03:10 PM #18 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 6:03:10 PM #19 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 6:03:10 PM #20 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 6:03:10 PM #21 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 4x (5,540 KB/s) 6:03:17 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:03:17 PM #23 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 6:03:17 PM #24 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 6:03:17 PM #25 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 6:03:17 PM #26 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:03:18 PM #27 Text 0 File Cdrdrv.cpp, Line 1288 18:03:18.088 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later 6:03:23 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03D10000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 6:03:24 PM #29 Text 0 File Cdrdrv.cpp, Line 1288 18:03:24.017 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later 6:03:27 PM #30 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04851800 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 6:03:27 PM #31 Text 0 File Mmc.cpp, Line 19440 Writer-Buffer for PIONEER DVD-RW DVR-109\H2 T0 reduced to 32768Bytes 6:03:28 PM #32 Text 0 File Cdrdrv.cpp, Line 1288 18:03:28.022 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later 6:03:34 PM #33 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04810200 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 6:03:34 PM #34 CDR -500 File Writer.cpp, Line 311 SCSI command aborted PIONEER DVD-RW DVR-109\H2 T0 6:03:34 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:03:34 PM #36 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 6:03:34 PM #37 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 767 6:03:44 PM #38 Phase 34 File dlgbrnst.cpp, Line 1832 Simulation failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 12/2/2005 10:20:04 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 12:00:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Is your drive external? If not then I think you have your jumpers installed incorrectly. And of course...don't use TDK, it sucks. I recommend Taiyo Yuden or Verbatim. Sony and Fuji are fine so long as they are made in Japan. I've never heard of only burning to 4100MB but w/e. It sounds like you're giving a tutorial lol
If you import the files into DVDshrink and it acceptes them and you can watch the movie without a problem, try burning it from shrink with DVDdecrypter instead of nero.
