1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

copy of copy?

Discussion in 'Nero discussion' started by essay55, Dec 7, 2005.

  1. essay55

    essay55 Regular member

    Joined:
    Dec 25, 2004
    Messages:
    117
    Likes Received:
    0
    Trophy Points:
    26
    at the risk of sounding dumb, how do i make a copy of a copy using nero 6? Feeling very illiterate at this pointp. Learning much from this forum though. i aslo have clonedvd2. Please advice...
     
    essay55, Dec 7, 2005
    #1
  2. Phantom69

    Phantom69 Regular member

    Joined:
    Apr 22, 2005
    Messages:
    1,235
    Likes Received:
    0
    Trophy Points:
    46
    funny noob question...

    anyway to create a copy of a copy, just load up nero express, click copy entire disc, in source drive select your disc, in destination drive click your burner (or image drive if you do not have a separate burner), this will copy it [bold](presuming it the source is small enough to fit on the destination)[/bold]...

    if the dvd is not small enough to fit on your destination drive then you will have to compress it with clonedvd2... but i do not know much about clonedvd2 cause i stopped using it a long while ago so i do not remember much about it, if nobody else replies, pm a member such as andmerr, or ddp who would have more experience with this program than myself...
     
    Phantom69, Dec 7, 2005
    #2
  3. essay55

    essay55 Regular member

    Joined:
    Dec 25, 2004
    Messages:
    117
    Likes Received:
    0
    Trophy Points:
    26
    Phantom 69,

    Thanks for your help. Such a user friendly sight . I had a whopping reply of (1). Yoursef. Again, appreciate it. Thanks to you I was able to burn my 1st copy of a copy! And to all you other subscribers of this forum, thanks for the advice. You were REALLY helpful!@!!!
     
    essay55, Dec 8, 2005
    #3
  4. essay55

    essay55 Regular member

    Joined:
    Dec 25, 2004
    Messages:
    117
    Likes Received:
    0
    Trophy Points:
    26
    Phantom 69,

    By the way, was does "noob" represent?
     
    essay55, Dec 8, 2005
    #4
  5. blivetNC

    blivetNC Regular member

    Joined:
    Nov 8, 2005
    Messages:
    1,692
    Likes Received:
    0
    Trophy Points:
    46
    Noob=Newbie
     
    blivetNC, Dec 8, 2005
    #5
  6. Phantom69

    Phantom69 Regular member

    Joined:
    Apr 22, 2005
    Messages:
    1,235
    Likes Received:
    0
    Trophy Points:
    46
    exactly blivetNC
     
    Phantom69, Dec 9, 2005
    #6
  7. jack3216

    jack3216 Member

    Joined:
    Dec 10, 2005
    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    16
    when i try to copy a DVD I have recorded from my cyberhome 1600 using Nero 6 burning rom i get to 3% creating disc and it freezes please help
     
    jack3216, Dec 10, 2005
    #7
  8. blivetNC

    blivetNC Regular member

    Joined:
    Nov 8, 2005
    Messages:
    1,692
    Likes Received:
    0
    Trophy Points:
    46
    Please post ypur Nero Burn Log.
    It'll help.
     
    blivetNC, Dec 10, 2005
    #8
  9. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    just passing so will chip in with this -

    let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.

    You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
     
    Last edited: Dec 10, 2005
    creaky, Dec 10, 2005
    #9
  10. jack3216

    jack3216 Member

    Joined:
    Dec 10, 2005
    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    16
    excuse my ignorance but could you tell me how i post that
     
    jack3216, Dec 10, 2005
    #10
  11. jack3216

    jack3216 Member

    Joined:
    Dec 10, 2005
    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    16
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <TDK DVDRW1616N> Version: 2.79 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD-ROM DDU1613 >Version: 9YS1 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST317242A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : TDK DVDRW1616N atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY DVD-ROM DDU1613 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TDK DVDRW1616N D: CDRom0
    SONY DVD-ROM DDU1613 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490864kB)
    Free physical memory: 202MB (207592kB)
    Memory in use : 57
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.12.2005
    UDF/ISO compilation
    18:06:02 #1 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 910
    Required file 'VIDEO_TS.IFO' is not present

    18:06:02 #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 910
    Required file 'VIDEO_TS.BUP' is not present

    18:06:02 #3 Phase 117 File dlgbrnst.cpp, Line 1832
    DVD-Video files compliance test failed


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 03/01/2003 01:02:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11:53:28 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11:53:04 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11:53:30 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 01:07:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    Last edited: Dec 11, 2005
    jack3216, Dec 10, 2005
    #11
  12. blivetNC

    blivetNC Regular member

    Joined:
    Nov 8, 2005
    Messages:
    1,692
    Likes Received:
    0
    Trophy Points:
    46
    1. get rid of your serial number in the post
    2. get rid of InCD, conflicts with the burning operation.
    3. looks like you are trying to copy to a CD versus a DVD?
    4. what type of DVD are you trying to copy?
     
    Last edited: Dec 10, 2005
    blivetNC, Dec 10, 2005
    #12
  13. jack3216

    jack3216 Member

    Joined:
    Dec 10, 2005
    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    16
    I have been burning cd's successfully for the past week may i respectfully suggest maybe that is the data you seen. The dvd's i have been trying to copy are programmes i have recorded from my cyberhome 1600 recorder from the tv.
     
    jack3216, Dec 10, 2005
    #13
  14. blivetNC

    blivetNC Regular member

    Joined:
    Nov 8, 2005
    Messages:
    1,692
    Likes Received:
    0
    Trophy Points:
    46
    Okay, I'm bad, your log shows you burning to CD's, thought you were trying to burn to DVD's, not quite familiar with the cyberhome recorder you mention. Let me look into this a little bit more okay?
     
    blivetNC, Dec 10, 2005
    #14
  15. jack3216

    jack3216 Member

    Joined:
    Dec 10, 2005
    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    16
    You are being very helpfull thank you for your time and patience as you will be aware by now i am a complete stummor
     
    jack3216, Dec 10, 2005
    #15
  16. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @jack3216 -

    i noticed every time i opened this thread my PC would completely grind to a halt. then i noticed the reason - you posted your entire Nero logfile. no biggie, however that means your serial number was dotted throughout. so i edited your post so that only the LAST section is in there, then made my journey useful and dissected the log. Not a great different to blivetNC's dissection...

    - newer version of your firmware, 2.7A, is here - http://forum.rpc1.org/dl_firmware.php?download_id=1897

    - you're doing something at the video conversion stage, Nero is simply warning you that the files are not dvd-compliant

    - InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
     
    creaky, Dec 11, 2005
    #16
  17. jack3216

    jack3216 Member

    Joined:
    Dec 10, 2005
    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    16
    All i am doing is recording a progamme from my tv using my cyberhome 1600 recorder onto a dvd disc. Excuse my ignorance is this link to update my tdk driver
     
    jack3216, Dec 11, 2005
    #17
  18. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @jack3216 - yup.

    there was nothing i could see in the logfile i chopped that showed a disc copy section of log. can you look thru your logfile again and see if there's a disc copy section. If there is, post just the LAST section..
     
    creaky, Dec 11, 2005
    #18
  19. jack3216

    jack3216 Member

    Joined:
    Dec 10, 2005
    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    16
    Took your advise used clean tool and reinstalled everything except in-d. Now when i type in c:\progam\files\ahead\nero\nerohistory.log for history get a message wrong path
     
    jack3216, Dec 11, 2005
    #19
  20. jack3216

    jack3216 Member

    Joined:
    Dec 10, 2005
    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    16
    Jack


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.18
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <SONY DVD-ROM DDU1613 >Version: 9YS1 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ExcelStor Technology J680 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST317242A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : TDK DVDRW1616N atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY DVD-ROM DDU1613 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TDK DVDRW1616N D: CDRom0
    SONY DVD-ROM DDU1613 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490864kB)
    Free physical memory: 164MB (168832kB)
    Memory in use : 65
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.12.2005
    DVD-Copy over Image
    22:41:55 #1 SCSI -1080 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02824800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x00
    CDB Data: 0xAC 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x3A 0x00

    22:42:34 #2 SCSI -1033 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    22:42:34 #3 SCSI -1033 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    22:42:36 #4 SCSI -1033 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    22:42:38 #5 SCSI -1033 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    22:42:39 #6 SCSI -1033 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    22:42:41 #7 SCSI -1033 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    22:42:45 #8 Text 0 File Reader.cpp, Line 127
    Reader running

    22:42:45 #9 Text 0 File Writer.cpp, Line 122
    Writer Image Recorder running

    22:42:45 #10 Text 0 File DVDCopy.cpp, Line 293
    DVD Track-Information from source disc:
    Media Type: DVD+R
    S01 T01 Con 0x04 Start 0 Len 270336 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    22:42:45 #11 Text 0 File DVDCopy.cpp, Line 406
    Max -1 tracks of 1 allowed to copy
    1: 0 - 270336 = 270336, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    22:42:45 #12 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    22:42:55 #13 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 4718591 (1048:34.41, 9215MB)
    Last address to be written: 270335 ( 60:04.35, 527MB)

    22:42:55 #14 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    22:42:55 #15 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    22:42:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 270336 (270336) = #270336/60:4.36
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 270336 blocks [Image Recorder]
    --------------------------------------------------------------

    22:42:55 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 553648128, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    270336 | lead-out | 1 | 0x41 | 0x00

    22:42:55 #18 Phase 120 File dlgbrnst.cpp, Line 1832
    Creating the image for burning

    22:42:55 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    22:43:15 #20 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D1000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x3E 0x00 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:43:26 #21 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D9000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x51 0x70 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:43:42 #22 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D9000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x51 0x70 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:43:50 #23 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D9800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x51 0x71 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:43:58 #24 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DA000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x51 0x72 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:44:06 #25 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DA800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x51 0x73 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:44:14 #26 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DB000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x51 0x74 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:44:23 #27 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DB800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x51 0x75 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:44:32 #28 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DC000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x51 0x76 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:44:40 #29 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DC800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x51 0x77 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:44:55 #30 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D9000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x50 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:45:02 #31 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D9000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x50 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:45:02 #32 CDCOPY -12 File DVDReader.cpp, Line 117
    Unrecoverable read error at
    LBA 20848 - 20855

    22:45:10 #33 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D9800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x51 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:45:18 #34 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DA000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x52 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:45:25 #35 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DA800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x53 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:45:33 #36 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DB000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x54 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:45:41 #37 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DB800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x55 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:45:48 #38 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DC000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x56 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:45:56 #39 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DC800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x57 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:46:03 #40 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DD000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x58 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:46:11 #41 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DD800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x59 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:46:19 #42 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DE000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x5A 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:46:26 #43 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DE800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x5B 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:46:34 #44 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DF000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x5C 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:46:43 #45 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DF800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x5D 0x5D 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:46:59 #46 SCSI -1128 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D9000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x66 0xB0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    22:47:06 #47 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D9000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x66 0xB0 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:47:06 #48 CDCOPY -12 File DVDReader.cpp, Line 117
    Unrecoverable read error at
    LBA 23888 - 23901

    22:47:14 #49 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041D9800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x66 0xB1 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:47:22 #50 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DA000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x66 0xB2 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:47:30 #51 Phase 40 File dlgbrnst.cpp, Line 1519
    Aborted by user

    22:47:30 #52 SCSI -1093 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x041DA800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x66 0xB3 0x00 0x00 0x01 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x02 0x00

    22:47:32 #53 CDCOPY -12 File DVDReader.cpp, Line 117
    Unrecoverable read error at
    LBA 26288 - 26291

    22:47:33 #54 Phase 68 File dlgbrnst.cpp, Line 1832
    Burn process aborted


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 03/01/2003 01:02:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 01:07:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ====
    creaky created another history file by trying to copy a disc this is data disc stopped creating at 8% for your info i am using verbatim dvd+r discs
     
    jack3216, Dec 11, 2005
    #20

Share This Page