Hey all, hoping someone can help me on this one, having major probs all of a sudden with burning dvds, keep getting the error:Backup file 'VTS_01_0.BUP' should be identical to 'VTS_01_0.IFO someone said that you just copy one over the other but that dont work, ive also switched from nero 6 to 7 and still get the same thing happening but not every time. My firmware is up to date acocording to rpc1.org, so I'm at a loss so heres the log file if anyone could take a look for me, that would be great: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 (Nero Express) Recorder: <SONY DVD RW DW-D22A> Version: BYS3 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <AXV CD/DVD-ROM >Version: 2.0B - HA 1 TA 2 - 7.0.1.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON COMBO SOHC-5232K atapi Port 1 ID 1 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.0B a347scsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DW-D22A D: CDRom0 LITE-ON COMBO SOHC-5232K E: CDRom1 AXV CD/DVD-ROM F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 176MB (180588kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.12.2005 UDF/ISO compilation 08:17:56 #1 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 996 Backup file 'VTS_01_0.BUP' should be identical to 'VTS_01_0.IFO' 08:17:56 #2 Phase 117 File dlgbrnst.cpp, Line 1725 DVD-Video files compliance test failed 08:18:05 #3 Phase 132 File dlgbrnst.cpp, Line 1725 DVD-Video files compliance ignored 08:18:05 #4 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 08:18:05 #5 Phase 111 File dlgbrnst.cpp, Line 1725 DVD-Video files sorted 08:18:06 #6 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 08:18:06 #7 Text 0 File Reader.cpp, Line 124 Reader running 08:18:06 #8 Text 0 File Writer.cpp, Line 113 Writer D: SONY DVD RW DW-D22A running 08:18:06 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 08:18:06 #10 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 08:18:06 #11 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 08:18:06 #12 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 728415 (161:52.15, 1422MB) 08:18:06 #13 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 08:18:06 #14 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: SONY DVD RW DW-D22A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 08:18:06 #15 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 08:18:06 #16 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 728416 (728416) = #728416/161:52.16 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 728416 blocks [D: SONY DVD RW DW-D22A] -------------------------------------------------------------- 08:18:06 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: SONY DVD RW DW-D22A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1491795968, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 728416 | lead-out | 1 | 0x41 | 0x00 08:18:06 #18 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 08:18:06 #19 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 08:18:06 #20 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 08:18:06 #21 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 08:18:10 #22 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 4x (5,540 KB/s) 08:18:10 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 08:18:10 #24 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 08:18:10 #25 Text 0 File MMC.cpp, Line 21611 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 08:18:10 #26 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 08:18:10 #27 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 08:18:37 #28 Text 0 File Cdrdrv.cpp, Line 1197 08:18:37.730 - D: SONY DVD RW DW-D22A : Queue again later 08:23:28 #29 Text 0 File WriterStatus.cpp, Line 116 <D: SONY DVD RW DW-D22A> start writing Lead-Out at LBA 728416 (B1D60h), length 0 blocks 08:23:28 #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 08:23:28 #31 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 728415 08:23:47 #32 Phase 161 File dlgbrnst.cpp, Line 1725 Burn process completed successfully with warnings Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 22:28:09 (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 21:59:42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Edit: the disks I have burned so far with these errors have not turned out to coasters, they seem to work ok on my stand alone, but this is bugging the hell out of me!!!!
It won't hurt to free up more memory. Nero is telling you that it doesn't really like this file "VTS_01_0.BUP", instead it should be something like these "VTS_01_0.IF, VIDEO_TS, VTS_01_0, VTS_02_01, VTS_03_01, VTS_04_0, etc." Oh God.... noth another CMC MAG newbies here -- you're pretty lucky to have a successfuly burned this time. However, I guarantee you 100% that down the road, you're going to have a tough time playing this DVD. I highly recommend for you to use high quality media like genuine Yuden, Verbatim (Advanced Azo) and Maxell (made in japan).
k, so I have shite media, you live and learn thx! so a couple of questions 1. why would how much RAM i was using at the time have an effect on the way Nero created the files. to quote: Nero is telling you that it doesn't really like this file "VTS_01_0.BUP", instead it should be something like these "VTS_01_0.IF, VIDEO_TS, VTS_01_0, VTS_02_01, VTS_03_01, VTS_04_0, etc.". So why did this happen in the first place? is what I am trying to uncover. Is it a prob with Nero, my dvd rw, the media I am using etc, etc. All i have found out so far is that my dvd's are rubbish and I need to free up some more RAM! thanks for the contribution but I need more if possible, Cheers again in advance for any input guys.
From the Nero site: It looks, from the information above, that the error occurs in the ripping stage. What is used to rip the files?
It was a n xvid file transcoded using vision express to dvd then burnt using the "burn image to disk" option within nero. Also as an update i have run the Nero clean tool, deleted all files from my prg files and looked in the registry but cant find nero in there after the clean tool was ran, and ive reinstalled nero 6 as a precautionary measure,will this help? I also disabled Norton during the reinstall of Nero 6. Hopefully i'll buy some Taiyo Yuden media, but ive just bought a 50 spindle of these disks that i were told are crap.
Seems to me that you may get more help in the XVID forum if the error is occuring with XVID files during the encoding process. What I read is that non-compliance is typically when the the DVD files are created and a BUP file is not an exact copy of the IFO file and the solution is to make a copy of the IFO and rename it BUP, thus replacing the BUP with a duplicate. As to the supposed crappy nature of your disks, while these comments about CMC are endemic to this forum, some people swear by them as opposed to at them. I haven't tried them - so no opinion, but they might be quite adequate for data disks and since TY disks are sometimes hard to find, except through mail order, Verbatim might be easier to pick up.
Thx but cant see that the Xvid forum can help me too much as this has also happened whilst encodong a previous file, so I dont think It can be a prob with the file itself. Can anyone else shed any light on the problems I am experiencing?
