I've tried burning some video files to DVD media with Nero 6.3.0.3. After 3 times trying (of course with 3 new blank DVD), it comes with the same error. The process has reached 100% and buffering was going from 100% to 0% in the end, as normal. But error happened. "No seek complete Could not perform end of Disc-at-once" Anybody can help? I have error log if needs. Thank you.
I have no problem on the previous burning. This is the log file. ====================== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 19:18:06 Nero version: 6.3.0.3 Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0A - HA 3 TA 0 - 6.3.0.3 Adapter driver: <atapi> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 4 TA 0 - 6.3.0.3 Adapter driver: <xmasscsi> HA 4 === Scsi-Device-Map === DiskPeripheral : HDS722516VLAT20 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 98196H8 atapi Port 0 ID 1 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 3 ID 0 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 4 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-1300A I: CDRom0 AXV CD/DVD-ROM J: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523756kB) Free physical memory: 168MB (172732kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.12.2005 ISO compilation 19:58:09 #1 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : Multibyte Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 19:58:09 #2 Text 0 File Reader.cpp, Line 118 Reader running 19:58:09 #3 Text 0 File Writer.cpp, Line 124 Writer _NEC DVD_RW ND-1300A running 19:58:09 #4 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 19:58:09 #5 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 19:58:09 #6 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2270511 (504:33.36, 4434MB) 19:58:09 #7 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 19:58:09 #8 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: SONY08 - D1 Disc Application Code: 64, Disc Physical Code: 193 19:58:09 #9 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:58:09 #10 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2270512 (2270512) = #2270512/504:33.37 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2270512 blocks [_NEC DVD_RW ND-1300A ] -------------------------------------------------------------- 19:58:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [_NEC DVD_RW ND-1300A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4650008576, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2270512 | lead-out | 1 | 0x00 | 0x41 19:58:09 #12 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 19:58:09 #13 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 19:58:09 #14 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 19:58:09 #15 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 4x (5,520 KB/s) 19:58:09 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 19:58:09 #17 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 14:04,641 (844641ms) -> OK 19:58:09 #18 Text 0 File DVDR.cpp, Line 1512 Recording mode: Sequential Recording Mode 19:58:09 #19 Text 0 File Mmc.cpp, Line 19487 Set BUFE: JustLink -> ON 19:58:10 #20 Text 0 File DVDR.cpp, Line 1643 Start write address at LBA 0 DVD high compatibility mode: Yes 19:58:10 #21 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:58:23 #22 Text 0 File Cdrdrv.cpp, Line 1277 19:58:23.796 - _NEC DVD_RW ND-1300A\H3 T0 : Queue again later 20:12:16 #23 Text 0 File WriterStatus.cpp, Line 115 <_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2270512 (22A530h), lenght 0 blocks 20:12:16 #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 20:12:16 #25 Text 0 File DVDR.cpp, Line 1847 EndDAO: Last written address was 2270511 20:13:04 #26 SCSI -1093 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 20:13:04 #27 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 20:13:04 #28 CDR -1093 File ThreadedTransferInterface.cpp, Line 1659 No seek complete 20:13:04 #29 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1659 Could not perform end of Disc-at-once 20:13:04 #30 Text 0 File DVDR.cpp, Line 1847 EndDAO: Last written address was -1 20:13:04 #31 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 20:13:04 #32 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 20:13:05 #33 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/08/04 14:59:42 (Adapter driver for rec) File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5248 bytes, created 2003/12/23 2:15:42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Current version of firmware is 1.0c, yours is 1.0a. Upgrade here www.RPC1.org. Current version of Nero is also old, current version is 6.6.0.18 Free up some resources and don't multitask. You are burning to close to the edge of the disc...change target size to 4300. Apply these few tweaks and you will probably be back in business.
