here is my log Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST RW/DVD GCC-4320B>Version: 1.00 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4320B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4320B D: CDRom0 PIONEER DVD-RW DVR-109 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 55574528 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 367MB (376304kB) Free physical memory: 188MB (192580kB) Memory in use : 48 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.12.2005 UDF/ISO compilation 7:15:52 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 7:15:52 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 7:15:52 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:15:52 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 7:15:52 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 7:15:52 PM #6 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-109 running 7:15:52 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:15:52 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 7:15:52 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 7:15:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 929983 (206:39.58, 1816MB) 7:15:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD DVD) 7:15:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R Disc Manufacturer: TTG02 - Disc Application Code: 64, Disc Physical Code: 193 7:15:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:15:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 929984 (929984) = #929984/206:39.59 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 929984 blocks [PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 7:15:53 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1904607232, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 929984 | lead-out | 1 | 0x41 | 0x00 7:15:53 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 7:15:53 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 7:15:53 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 7:15:53 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 6x (8,310 KB/s) 7:15:53 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:15:53 PM #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 7:15:53 PM #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 7:15:53 PM #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 7:15:53 PM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:15:55 PM #25 Text 0 File Cdrdrv.cpp, Line 1288 19:15:55.062 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later 7:18:28 PM #26 Text 0 File Cdrdrv.cpp, Line 1288 19:18:28.413 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later 7:18:36 PM #27 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03D40000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 7:18:36 PM #28 Text 0 File Cdrdrv.cpp, Line 1288 19:18:36.594 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later 7:18:58 PM #29 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04751800 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 7:18:58 PM #30 Text 0 File Mmc.cpp, Line 19440 Writer-Buffer for PIONEER DVD-RW DVR-109\H2 T0 reduced to 32768Bytes 7:18:59 PM #31 Text 0 File Cdrdrv.cpp, Line 1288 19:18:59.047 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later 7:19:41 PM #32 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04710200 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 7:19:41 PM #33 CDR -500 File Writer.cpp, Line 311 SCSI command aborted PIONEER DVD-RW DVR-109\H2 T0 7:19:41 PM #34 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:19:41 PM #35 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:19:41 PM #36 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 2047 7:19:43 PM #37 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 6x (8,310 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 12/2/2005 10:20:04 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 12:00:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ah, i thought we'd got you sorted here - http://forums.afterdawn.com/thread_view.cfm/254981 i think this is the next problem - - those discs aren't much good at all
Your burner don't really like the media, try other high quality media like Taiyo Yuden, Verbatim "Advanced Azo" and Maxell (Hitachi - made in japan). For some reason, your SCSI is aborted due to having a bad read on the blank media. Here is an interesting read about Small Computer System Interface. SCSI From Wikipedia, the free encyclopedia. SCSI stands for "Small Computer System Interface", and is a standard interface and command set for transferring data between devices on both internal and external computer buses. SCSI is usually pronounced "scuzzy". SCSI is most commonly used for hard disks and tape storage devices, but also connects a wide range of other devices, including scanners, CD-ROM drives, CD recorders, and DVD drives. In fact, the entire SCSI standard promotes device independence, which means that theoretically anything can be made SCSI — SCSI printers have been manufactured. Since its standardization in 1986, SCSI has been commonly used in the Apple Macintosh and Sun Microsystems computer lines. It has never been popular in the IBM PC world, due to the lower cost and adequate performance of its ATA hard disk standard. The introduction of USB, FireWire, and ATAPI made SCSI a relatively unattractive proposition on PC due to its high cost and rising complexity. At this time, SCSI is popular on high-performance workstations, servers, and high-end peripherals; and RAID arrays on servers almost always use SCSI hard disks. Desktop computers and notebooks more typically use the ATA/IDE or the newer SATA interfaces for hard disks, and USB or FireWire connections for external devices. Try to burn at 4X next time -- it's the best, safest and most recommended speeds.
