Could not perform end of Disc-at-once error

Hi,
I sent my laptop in for repair and when it came back with the original installation, the DVD burner didn't work anymore (it worked fine before -strange).

First, Nero wouldn't recognise the drive as a DVD drive, so I updated the firmware and this is fixed now. But Nero still does not burn DVDs - before even starting, it stops and says "Could not perform end of Disc-at-once". I have tried unistalling Nero, I used the Nero cleaning tools, I defragmented my hard disk, I reinstalled Nero again - no luck.

I tried burning with imation DVD+R and with Packard Bell DVD+R DVDs.

Could you help me please? Much appreciated. Here is the last log:


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: < DVD+RW RW8160> Version: 1.08 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < DVD+RW RW8160 >Version: 1.08 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8160 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
DVD+RW RW8160 F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 129MB (132180kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.12.2005
ISO compilation
19:22:14 #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:22:14 #2 Text 0 File Reader.cpp, Line 127
Reader running

19:22:14 #3 Text 0 File Writer.cpp, Line 122
Writer DVD+RW RW8160 running

19:22:14 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

19:22:14 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

19:22:14 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1893471 (420:46.21, 3698MB)

19:22:14 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

19:22:14 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVD+RW RW8160, Media type: DVD+R

19:22:14 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:22:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1893472 (1893472) = #1893472/420:46.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1893472 blocks [DVD+RW RW8160]
--------------------------------------------------------------

19:22:14 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVD+RW RW8160] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3877830656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1893472 | lead-out | 1 | 0x41 | 0x00

19:22:15 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

19:22:16 #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

19:22:16 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

19:22:16 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

19:22:16 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:22:16 #17 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07430600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

19:22:16 #18 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

19:22:16 #19 Text 0 File DVDR.cpp, Line 6168
Drive: DVD+RW RW8160
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

19:22:16 #20 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM

19:22:16 #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

19:22:39 #22 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06DE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05

19:22:39 #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc

19:22:39 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

19:22:39 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

19:22:39 #26 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

19:22:39 #27 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

19:22:39 #28 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

19:22:39 #29 Text 0 File DVDR.cpp, Line 6168
Drive: DVD+RW RW8160
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0

19:22:39 #30 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command

19:22:39 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

19:22:39 #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 25/08/2005 00:00:00
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Thanks,
DouceVie

 

Physical memory : 510MB (523248kB)
Free physical memory: 129MB (132180kB)
Memory in use : 74 %
Uncached PFiles: 0x0

That in your log points to a lot of processes runing at time of burn. Download enditall2 and run it right before burn to shut some down. If it works then The next step will be for you to decide if you will just use enditall2 before burning all the time or try and track down what is the process that is interfering.

 

Hi Whompus,
thanks for the tip. I tried and got the number down to:

Memory in use : 66 %

but I still get the same error.

Do you know what this line could mean:
20:49:11 #30 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
?

Thanks
DouceVie