I have been burning DVDs perfectly and suddenly during burning,a box comes up that says burn process error at 8x and ejects the blank disk and gives me a ton of information. I have a Gateway computer and a LiteOn dvd burner. If someone could please please PLEASE help that would be great! Here is what the box tells me: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.15 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 15h Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS09 - HA 2 TA 0 - 6.6.0.15 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW-241 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === QSI CDRW/DVD SBW-241 D: CDRom0 LITE-ON DVDRW SOHW-1693S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523244kB) Free physical memory: 184MB (189000kB) Memory in use : 63 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.12.2005 NeroAPI 8:43:36 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 8:43:36 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 8:43:36 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 8:43:36 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 8:43:36 PM #5 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1693S running 8:43:36 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 8:43:36 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:43:36 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:43:36 PM #9 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 8:45:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1879519 (417:40.19, 3670MB) 8:45:17 PM #11 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO 8:45:17 PM #12 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 8:45:17 PM #13 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.) Disc not writeable. Insert writeable disc. (Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.) 8:45:17 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1879520 (1879520) = #1879520/417:40.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1879520 blocks [LITE-ON DVDRW SOHW-1693S] -------------------------------------------------------------- 8:45:17 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3849256960, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1879520 | lead-out | 1 | 0x41 | 0x00 8:45:18 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 8:45:18 PM #17 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 8:45:18 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 8:45:18 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 8x (11,080 KB/s) 8:45:18 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:45:18 PM #21 Text 0 File DVDR.cpp, Line 2357 Recording mode: Sequential Recording Mode 8:45:18 PM #22 Text 0 File Mmc.cpp, Line 21663 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 8:45:18 PM #23 Text 0 File DVDR.cpp, Line 2511 Start write address at LBA 0 DVD high compatibility mode: Yes 8:45:18 PM #24 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:45:58 PM #25 Text 0 File Cdrdrv.cpp, Line 1288 20:45:58.221 - LITE-ON DVDRW SOHW-1693S\H2 T0 : Queue again later 8:46:37 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00D00000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x19 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 8:46:40 PM #27 Text 0 File Cdrdrv.cpp, Line 1288 20:46:40.872 - LITE-ON DVDRW SOHW-1693S\H2 T0 : Queue again later 8:46:47 PM #28 SCSI -1076 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x049D1400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x28 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x19 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x28 0x00 8:46:47 PM #29 CDR -1076 File Writer.cpp, Line 311 Disc changed 8:46:47 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:46:47 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:46:48 PM #32 Text 0 File DVDR.cpp, Line 2749 EndDAO: Last written address was 6495 8:46:48 PM #33 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 8x (11,080 KB/s) 8:46:48 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 8:46:48 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ow man why do people use the error log which tells me nothing. First thing I noticed was you said you burn at 8x. Just a tad high on the warp speed I personally never burn over 2x and sometimes burn at 1x but then again its more important to me to get the best picture with 0 errors. Call me fussy. Did you switch burn media recently? Did you try another drive? I give up.
I have always used Imation dvd-r's with no problems at all. I just bought this LightOn external drive and thats what I burn on, do you suggest anything that I could to get me back to burning dvds?
DVDLUV Welcome to the forum Errors below: 1. Nero API version: 6.6.0.15 You need to update to the newest version of 6 2.Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS09 http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=17 Update your firmware are you are 2 versions behind 3.Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 Try better blank media as CMC is Crap. Try Verbatim, Taiyo Yuden, Maxell, Sony MIJ 4. 8:46:37 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00D00000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) You asked the burner to do something it could not do 5. 8:46:47 PM #28 SCSI -1076 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x049D1400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) It is telling you something is wrong w/ the burner I know this is an external burner but are you on a Laptop as there also might be a problem w/ the usb port
well okay, I am downloading the newest nero right now, but which firmwire do I download, there are about 10 different ones and I have no clue which one to dl. Also, if it is telling me something that it can not do or something is wrong with the burner, why did it work the other 30 times I did burn dvds then? and why all of a sudden is this happening?
@megabyte2 Look at what Car.Mike typed, that is why people use logs. @DVDLUV This'll be easier: http://forum.rpc1.org/dl_firmware.php?download_id=2056 Download f/w KSOB. Time goes on and your things are out of date. It happens, they don't make these updates for no reason. Download them. You bad media is a real problem. and slow down speed to 4x good media or bad.
I donno about burning at high speed as I have many computers I just set the burn speed to the lowest setting and let it go takes maybe 30 minutes for the average DL movie. I rarely get any errors and oh yes I use memorex brand. I mean if your using an oldier computer you may see serious slow downs especially with the encoding process but im in no hurry so for me it works. Hell I just got anydvd so no more weird solutions to back up madigascar.
Okay, i downloaded the newest nero and the firmware, so is my burner ready to go or do i have to do something with shrink also? I appriciate the help so far
Yes, get better media, CMC is one of the worst things you can buy. ONe more really important thing: Is your burner external? If not then you got a problem. Atapi isn't loaded correctly.
@megabyte2, I have only 2 things to say to you. If you CANT read a NERO log then please dont pass any comments. You say you use Memorex discs, well I need say no more.
DVDLUV, CMC is the real manuf of your Blank Media and they really manuf very low quality blank DVD's. We are telling you to try better blank media. If you are in the US then see if you can find Verbatim at Office Depot ( 16X on sale 50 for $12.99)or find some Maxells
thanks! Well my burner is burning dvds again, i really appriciate all the help, BUT i do have one more question, it says my nero will expire at 1/1/06, WILL i be able to redownload it after that?
Just wanted to throw in my humble opinion on media. I have used Fuji blank DVD-Rs for the last year and rarely, if ever, have a burning problem. Plus, they're really cheap. I get them at Best Buy when they're on sale (which they are every month) and just recently paid only $30 for a 100 count spindle. I used Memorex in the past and had nothing but trouble burning them and the ones that did burn wouldn't play in my DVD player. Hope this helps. Anyone know why DVD Shrink won't recognize a DVD burner sometimes? On another PC of mine I loaded NERO 6 and then DVD Shrink, but when I select "Backup" on DVD Shrink, it doesn't find my DVD-RW and only gives me the options of creating an ISO FIle or Hard Disk Folder.
OKAY, another question.......I am useing IMATION dvd-r's and they skip a lot, I just tried watching along came polly and with 15 minutes left it wouldnt let me watch it, is it bc of the crappy dvd-rs or just other reasons?
Skippy is usually 3 things, dirty/scratched disc, burn too fast, or crappy media. And Imation is crappy media. No you can't re'dl @jcbaty Fuji is fine if it's Made in Japan, only if it's made in Japan.
gwendolin, but you dont understand thats my exact point I DONT HAVE TROUBLE WITH MEMOREX because I burn at 2x or less. The most halarious thing is most of these items drives media etc are made by one or two companies and sold to other companies to put their name on them. When I used to work in computers I used to know every supplier and wholesaler out there and could tell you the source of every component these days it all comes from china or at least thats what im told. As for the Nero logs they dont tell me anything boy. Im a people trouble person and usually get more from person telling me whats wrong. But at least I try to help I dont see you helping anyone. Call me an idiot but anyone can complain how about helping? What do you think?
@DVDLUV I'm in agreement with Car.Mike, GlueEater, and gwendolin. Get rid of the Memosux media and once your upgrades are done you should be good to go. Slow burn down to 4x with quality media such as Taiyo Yuden, Verbatim, Maxell (MIJ), Sony (MIJ), Fuji (MIJ). (MIJ) = Made In Japan Don't use paper labels. (edited to add paper label comment)
Alright, so i do have crappy media, but how do i slow the burner down if that is the problem also, it takes like 2 hrs to burn, thats pretty slow to me. So my problem is more like i have crappy dvd-rs?
