i got a problem on nero version 5.5 when the burning process about to begin i give me an error that is "power calibration error" and when i reburn it it when smoothly but when i wan to play it the cd back, it was empty. so how do i solve this problem?
A power calibration error is caused by the inability of a DVD-RW drive to use a DVD-R or DVD-RW disk.(also effects cd rom drives) DVD-R and DVD-RW disks themselves have information written on them, within this Media ID code there is information that the drive uses to calibrate itself to the disk, when a drive first starts to write to a disk it will burn a small amount of data to a calibration area on the disc, using the calibration information in the Media ID code, and then try to read back the data that it has written. If it cannot be read, then disk will be ejected and fail with a power calibration error. A power calibration error is normally caused by problems with the media. Should you be experiencing problems with your drive or the media, we recommend that a disk from a good quality manufacturer be used to test it.
