i have been trying to back up dvd i have been using fabdecrypter ..then dvd shrinkand then dvd decrypter to copy but no luck..i get small amount of pixelisation same time freezes a little i have lowerd the speed i copy to 2.4 .set the dvd size at 4360 .. i have been using ..sony tdk maxell ..emtec..disk no luck..can any one help
What type of DVD Burner do you have? If you are able to Bitset/Booktype, most players will play them--Do you know how to booktype?
Are you using the Sony & Maxell "made in japan" by chance? Chances are if they're not "made in japan", then I don't recommend using them. What speeds did you burned with? Again, my 3 top choices of media are: (1) genuine Taiyo Yuden (2) Verbatim "Advanced Azo" (3) Maxell (Hitachi - made in japan).
john2y -- Make sure your firmware is up to date---and set the drive to booktype DVD-Rom (Can be done in DVD Decrypter or at the site below) http://codeguys.rpc1.org/dvdrw_overview.html Look up your burner and follow directions exactly
my firmware is up to date. and i will set the drive to booktype DVD-Rom to see to see if it works ..thank you for your help
E 21:02:31 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00 E 21:02:31 SENSE Interpretation: Invalid Field in CDB i set the drive to booktype DVD-Rom ..copy a dvd but still got small amount of pixelisation. the above is from the dvd decrypter log it comes up 4 times.. like the code above.. i dont no if it any help..
Looks like bad spot on media--I am not an expert on this---Did you use DVDFabDecrypter? If so, I would use only DVD Decrypter, then Shrink and burn slow--Maybe also change the target size to 4300--the very end of the disk can be a trouble spot--You should probably use RW disks--I hate to see a lot of coasters (I've had my share!) Good Luck Whitfield
