I ripped the DVD with decryptr, dvdfab decrypter and anydvd and all is good. When i try to burn with shrink or clonedvd or recode it does its thing all right but when the time comes for it to write -it stops at vob 1. can anyone help?
Your brand and burn speed should be okay. Are you receiving an error? Post your nero log - it can be found at crogram files>ahead>nero>nero history.log
When you used Shrink, did you try re-authoring and just copy main maovie? It's worked for me when at other times with similar problem
I just tried to run it again to generate a log for you. I used an RW disc instead of a single-write so as not collect another coaster. I hope that doesn't matter. I believe the RW was a Sony. The disc size was set to custom - 4360MB so i didt burn to the discs edge. Here's the log from recode - ********** Nero Recode 2 ********** Version: 2.2.6.17 Project type: Remake a DVD Target size: Custom (2232320) 22:24:44 File LangStreamPatcher.cpp, Line 56 Command table patching started... 22:24:44 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: BENQ DVD DD DW1625 Number of copies: 2 Write speed: 0 KB/s Temp folder: H:\All Finished DVD-5 Folder\Devil's Rejects (92023279616 bytes free) Direct burning: false Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer Shutdown when finished: false Advanced Analysis: true Compress Adaptive: true 22:26:18 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VTS_01 Title Vobs [12982 vobus] 5219.31MB -> 4359.86MB [R 0.88] Video: 3654.65MB, extra: 705.20MB Audio: 8 streams 0. 0. Dolby Digital 5.1-ch English 363.50MB [enabled] 1. 1. DTS 5-ch English 612.72MB [disabled] 2. 2. Dolby Digital 2-ch English 155.46MB [enabled] 3. 3. Dolby Digital 2-ch English 155.46MB [enabled] 4. [unavailable] 5. [unavailable] 6. [unavailable] 7. [unavailable] Subpicture: 32 streams 0. 0. English 5.42MB [enabled] 1. 1. Spanish 4.20MB [disabled] 22:26:18 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 22:26:19 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD+RW 22:26:19 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2283092 sectors (2295104) 22:26:19 File burn_dvdfiles.cpp, Line 684 Compile DVD: begin deep analysis 22:35:50 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2283092 sectors (2232320 required) 22:35:50 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4459.16MB (4459.16MB obtained) 22:35:50 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 22:40:54 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_2.VOB 22:45:00 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_3.VOB 22:50:09 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_4.VOB 22:54:18 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_5.VOB 22:55:10 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 5219.31MB -> Expected 4459.02MB -> Output 4459.02MB Finished error -0.00MB Ratio encoded = 12943 Original encoded = 39 Slide encoded = 0 StillImage encoded = 0 Output extra size = 701.45MB Source video size = 3904.06MB Pictures Modified [I 4877] [P 17980] [B 94162] 22:55:15 File burn_dvdfiles.cpp, Line 547 Compile DVD: completed successfuly (4459.16MB) 22:55:15 File NeroRecorderBase.cpp, Line 1096 Burning 9 files with total size of 4675770368 bytes on hard disk 22:55:16 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:35:34 PM Nero API version: 6.6.0.6 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Recorder: <BENQ DVD DD DW1625> Version: BBBA - HA 3 TA 0 - 6.6.0.6 Adapter driver: <> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD1200BB-60CJA1 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1200JB-00GVA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-107D F: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 SCSIVAX DVD/CD-ROM V: CDRom2 BENQ DVD DD DW1625 G: CDRom4 PIONEER DVD-RW DVR-109 J: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 489MB (501140kB) Memory in use : 52 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.12.2005 NeroAPI 10:55:16 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 10:55:16 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 10:55:16 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 10:55:16 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 10:55:16 PM #5 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DD DW1625 running 10:55:16 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 10:55:16 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 10:55:16 PM #8 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-At-Once, using DVD media 10:55:17 PM #9 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2283631 (507:28.31, 4460MB) 10:55:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 10:55:17 PM #11 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: BENQ DVD DD DW1625, Media type: DVD+RW Disc Manufacturer ID: RICOHJPN, Media Type ID: W01, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 10:55:17 PM #12 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:55:17 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2283632 (2283632) = #2283632/507:28.32 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283632 blocks [BENQ DVD DD DW1625] -------------------------------------------------------------- 10:55:17 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [BENQ DVD DD DW1625] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676878336, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2283632 | lead-out | 1 | 0x41 | 0x00 10:55:18 PM #15 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:55:18 PM #16 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 10:55:18 PM #17 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:55:18 PM #18 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 10:55:18 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:55:18 PM #20 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 00 52 49 43 4F 48 - 4A 50 4E 57 30 31 01 39 ...RICOHJPNW01.9 23 00 8A 79 6A 02 1A 00 - 8E 7A 6A 02 1A 00 8C 7A #..yj....zj....z 6A 02 1A 23 13 10 F0 10 - 00 00 00 00 00 00 00 00 j..#............ 10:55:18 PM #21 Text 0 File DVDPlusRW.cpp, Line 615 Start write address at LBA 0 DVD high compatibility mode: Yes 10:58:08 PM #22 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 10:58:08 PM #23 Text 0 File Reader.cpp, Line 385 Exception value: -1 10:58:22 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:58:24 PM #25 CDR -1207 File DVDR.cpp, Line 4805 Book Type automatically set to: Current recorder setting 10:58:24 PM #26 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 11:33:44 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 10:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 10:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 10:53:30 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 22:58:27 File NeroRecorderBase.cpp, Line 906 Burn failed (3) 22:58:27 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit
No I didn't try shrink to re-author. As your see i used recode to keep menus. Again, i used clonedvd also, same result. When using shrink, i did the whole disc except for some audio. I hope you can help, i'm going whacko - did everything i could think of.
Try re-auther...at least you might have the movie... Someone else will have to review the log to help you.
i ripped this (great) movie yesterday using just DVD Shrink (oh hang on i can't remember if i used DVDFab Decrypter), and burnt with Nero (using 'Verbatim TY' discs), watched it thru fine last night. anyway, - InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
I can understand about the Incd software but i have the same error when using clonedvd and when using shrink burning with decryptor - is the Incd messing up all my writing programns? I ask becse i had trouble downloading nero to begin with - isp issues - didn't want to fight that if i didn't have to.
I got this movie with anydvd and clonedvd 2. Make sure the dvd isnt scratched and isnt riddled with fingerprints
@Naui3355 I'm thinking somethings up with your drive and/or maybe aspi. Just guessing though so hopefully Creaky will step back in. Here a few things from your log that make me think that: Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === your burner BENQ DVD DD DW1625 is not listed here but if it's external that could be why. 10:58:08 PM #22 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 10:58:08 PM #23 Text 0 File Reader.cpp, Line 385 Exception value: -1 InCd can cause conflicts with other burning software and this may be some of the problem. Sorry can't be of more help but this one has me a little stumped.
- not too bad, 6.6.0.18 is latest 6.x version but i doubt your problem is Nero related. though as you need to uninstall/reinstall Nero to get rid of InCD, you may as well go update to 6.6.0.18 while youi're at it - latest firmware for your drive is BBGA from here - http://www.benq.co.uk/ServiceAndSupport/downloads/downloads.cfm?product=751&type=B - in Nero 6.x you see a question mark here if the burner is external to the PC, ie USB or whatever/or if there's a problem with the atapi drivers. In this case the atapi drivers look ok and the burner is external to the PC (HA 3 TA 0) - 4460MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space - follow ALL other suggestions - InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
Sorry, I had trouble signing on - something about servers ? Anyway, I updated my firmware, uninstalled Incd. I went to Device manager and saw no question marks (?). As I said, the burner IS external I saw no error in reading while working with discs ???? Refer to my original post - Again, i recieve no error when ripping with anything. I have gotten an error using shrink when beginning to process - don't remember exactly what - Mostly it drops out when trying to burn - generally around the beginning of the burn. 7 to 13% of the way in. I did try to burn the disc again after riding myself of Incd. Actually I traded my copy for a friend’s copy in order to backup only in case there was a problem with the disc itself. Oh yes, i burned only the movie, trimmed off all extras and trailers as suggested and i still have the same problem – This is getting old – I’ll try to get rid of everything Nero and try again – will post back - Editted because I forgot to add that i traded discs from the TY i was using to a verb datalife plus to see if that made a difference - it didn't - this sucks!
I have had many problems with Nero InCD in several different computers. I do not [bold]recommend[/bold] it at all.
Sorry, here was the latest log. Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 3964.41MB -> Expected 3962.04MB -> Output 3960.74MB Finished error -1.30MB Ratio encoded = 2 Original encoded = 9048 Slide encoded = 0 StillImage encoded = 0 Output extra size = 368.07MB Source video size = 3592.67MB Pictures Modified [I 1] [P 3] [B 16] 23:14:04 File dvd_record.cpp, Line 420 DirectBurn offset: VTS_01_0.IFO 48 23:14:13 File NeroRecorder.cpp, Line 694 Burn failed (3) ----- Begin NeroAPI error log ----- Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:35:34 PM Nero API version: 6.6.0.6 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Recorder: <BENQ DVD DD DW1625> Version: BBGA - HA 3 TA 1 - 6.6.0.6 Adapter driver: <> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD1200BB-60CJA1 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1200JB-00GVA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-107D F: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 SCSIVAX DVD/CD-ROM V: CDRom2 PIONEER DVD-RW DVR-109 J: CDRom5 BENQ DVD DD DW1625 G: CDRom4 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 554MB (567296kB) Memory in use : 45 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.12.2005 NeroAPI 10:52:21 PM #1 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: -1 ( 0:00.-1, 0MB) 10:52:21 PM #2 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO 10:52:21 PM #3 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: BENQ DVD DD DW1625, Media type: DVD+R 10:52:21 PM #4 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:52:21 PM #5 SCSI -1066 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x06420600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 10:52:21 PM #6 CDR -1207 File DVDR.cpp, Line 4805 Book Type automatically set to: Current recorder setting 10:52:21 PM #7 Text 0 File DVDPlusRW.cpp, Line 615 Start write address at LBA 0 DVD high compatibility mode: Yes 10:52:21 PM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1001 Estimated filesystem size: 544 10:52:21 PM #9 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 10:52:46 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 0. Length: 592 10:52:46 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1865 Reserved start fragment at 0 10:52:46 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 592. Length: 48 10:52:46 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 Writing VTS_01_1.VOB at sector 640 10:58:20 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2625 Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors) 10:58:20 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 2237 Added extra file VTS_01_2.VOB 10:58:20 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 Writing VTS_01_2.VOB at sector 524927 11:03:49 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 2625 Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors) 11:03:49 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 2237 Added extra file VTS_01_3.VOB 11:03:49 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 Writing VTS_01_3.VOB at sector 1049214 11:09:20 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 2625 Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors) 11:09:20 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2237 Added extra file VTS_01_4.VOB 11:09:20 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 Writing VTS_01_4.VOB at sector 1573501 11:14:04 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 2625 Finished writing file VTS_01_4.VOB of size 931919872 bytes (455039 sectors) 11:14:04 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 Writing VTS_01_0.BUP at sector 2028540 11:14:04 PM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2625 Finished writing file VTS_01_0.BUP of size 51200 bytes (25 sectors) 11:14:05 PM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 1397 Writing VTS_01_0.IFO at sector 592 11:14:13 PM #27 SCSI -1064 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x06410400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x21 0x00 11:14:13 PM #28 CDR -1064 File SessionUtils.cpp, Line 49 Invalid block address 11:14:13 PM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 712 Failed to release fragment at 592 11:14:13 PM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2588 Failed to release fragment at 592 11:14:13 PM #31 Phase 179 File APIProgress.cpp, Line 276 Writing file to disc failed 11:14:13 PM #32 Text 0 File BurnAtOnceRecorder.cpp, Line 3625 Disc info: Partitions: 0 11:14:13 PM #33 Text 0 File DVDR.cpp, Line 5619 Drive: BENQ DVD DD DW1625 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 11:14:18 PM #34 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 11:33:44 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ----- End NeroAPI error log ----- 23:14:19 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit BTW, i checked the dvd size and it is set for 4360MB as for the guide i was following. i'll try to clean all of Nero out and try again. If you have any more suggestions, post them to me so i can follow them also - thanks guys - robk - i got rid of Incd as requested and the problem stays - what are your saying?
- not too bad, 6.6.0.18 is latest 6.x version and as you're using Recode i'd update to 6.6.0.18. I used 6.6.0.0 for quite a while without issue, but i was only using Burning Rom so i know the audio/data aspects of Burning Rom were ok (for me) on an old version but as you're using something like Recode i'd update it - firmware is now up to date however see comments further down my reply - wierd, i saw where you mentioned the data was set for 4360MB - your firmware, while new, is lacking - it can't recognise those blank discs you're using. this is similar to what you should see - - ie a 3line paragraph when the firmware's up to date. When the media isn't recognised you just get the first line - see previous comment
