Here's the log... Any help is appreciated... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM Nero API version: 6.6.0.14 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 14d Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 3 TA 0 - 6.6.0.14 Adapter driver: <> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2060AT atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off === CDRom-Device-Map === QSI CDRW/DVD SBW-242 D: CDRom0 SCSIVAX DVD/CD-ROM F: CDRom1 SONY DVD RW DRU-810A E: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523504kB) Free physical memory: 173MB (178064kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.12.2005 NeroAPI 6:10:35 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 6:10:35 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 6:10:35 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 6:10:35 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 6:10:35 PM #5 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-810A running 6:10:35 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 6:10:35 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3297 First writeable address = 0 (0x00000000) 6:10:35 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3297 First writeable address = 0 (0x00000000) 6:10:35 PM #9 Text 0 File Burncd.cpp, Line 3230 Turn on Disc-At-Once, using DVD media 6:12:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) 6:12:05 PM #11 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO 6:12:05 PM #12 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: SONY DVD RW DRU-810A, Media type: DVD+R 6:12:05 PM #13 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.) 6:12:05 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY DVD RW DRU-810A] -------------------------------------------------------------- 6:12:05 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 6:12:06 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 6:12:06 PM #17 Text 0 File Burncd.cpp, Line 4114 Cache writing successful. 6:12:06 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 6:12:06 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 6:12:06 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:12:06 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x08270600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 6:12:06 PM #22 Text 0 File DVDR.cpp, Line 5762 Drive: SONY DVD RW DRU-810A Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 6:12:06 PM #23 CDR -1211 File DVDR.cpp, Line 4929 Book Type set to: DVD-ROM 6:12:06 PM #24 Text 0 File DVDPlusRW.cpp, Line 655 Start write address at LBA 0 DVD high compatibility mode: Yes 6:21:43 PM #25 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 6:21:43 PM #26 Text 0 File Reader.cpp, Line 385 Exception value: -1 6:21:43 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:22:09 PM #28 Text 0 File DVDR.cpp, Line 5762 Drive: SONY DVD RW DRU-810A Book Type request [gen]: DVD+R, write to EEPROM Changing the Book Type was finished successfully, return code 0 6:22:09 PM #29 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 6:22:09 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 6:22:09 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Edit this out via the notebook and pencil picture at the top of your post, it's your serial number. Your Nero is out of date, current is 6.6.0.18, your firmware is also out of date, current is 2.0d. Here is a link to it: http://forum.rpc1.org/dl_firmware.php?download_id=2179 Is this an external drive? If not then you don't have atapi installed correctly. Why isn't your burner listed? Any your DMA is off here is how you can fix it, this is an alkohol written guide by the way: ((To enable DMA back ON by "uninstalling" it's driver “for Win XP users”)) A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES" B) left click on "HARDWARE", left click on "DEVICE MANAGER" C) left click on + sign of DVD/CD-ROM Drives D) double left click on your DVD burner or your dvd-rom drive E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer F) once you restart your computer, Windows should automatically detect your DVD burner’s drive and re-install it for you. That's it...easy as smoking!! NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the “IDE ATA/ATAPI Controllers” (A) left click on + sign of "IDE ATA/ATAPI Controllers" (B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel") (C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!! ***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps. You are writing too close to the edge, try to write no further than 4300MB. Your burner isn't recognizing your media, what media are you using? A Firmware update via link above, should correct this problem. try 4x.
