Hello, when everi try to back up my songs,and other files, it starts to burn and get up to about 3% then resets, and then it will fail, any help would be cool. here is my log. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <GENERIC DVD DUAL 4XMax> Version: 2.17 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA DVD-ROM SD-R2312>Version: 1905 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK4021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R2312 D: CDRom0 GENERIC DVD DUAL 4XMax E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 446MB (457144kB) Free physical memory: 92MB (94536kB) Memory in use : 79 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.12.2005 ISO compilation 6:12:15 AM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 6:12:15 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 6:12:15 AM #3 Text 0 File Writer.cpp, Line 122 Writer GENERIC DVD DUAL 4XMax running 6:12:15 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:12:16 AM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 6:12:17 AM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2297887 (510:38.37, 4488MB) Last address to be written: 2281327 (506:57.52, 4455MB) 6:12:17 AM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 6:12:17 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: GENERIC DVD DUAL 4XMax, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 6:12:17 AM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:12:17 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2281328 (2281328) = #2281328/506:57.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2281328 blocks [GENERIC DVD DUAL 4XMax] -------------------------------------------------------------- 6:12:17 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [GENERIC DVD DUAL 4XMax] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4672159744, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2281328 | lead-out | 1 | 0x41 | 0x00 6:12:18 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 6:12:19 AM #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 6:12:19 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 6:12:19 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 6:12:19 AM #16 SCSI -1114 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012B280 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x52 0x01 0x00 0x00 0x00 0x01 0x00 0x00 0x24 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 6:12:19 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:12:19 AM #18 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 6:12:19 AM #19 Text 0 File Mmc.cpp, Line 21774 Set BUFE: BURN-Proof -> ON 6:12:20 AM #20 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 6:12:20 AM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:13:21 AM #22 SCSI -1114 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x044C0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 6:13:21 AM #23 CDR -1114 File Writer.cpp, Line 311 Reset occurred 6:13:21 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:13:21 AM #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 6:13:21 AM #26 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 543 6:14:02 AM #27 SCSI -1114 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03E15E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 6:17:36 AM #28 CDR -1175 File Cdrdrv.cpp, Line 1240 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 5A 00 05 00 00 00 00 00 48 00 00 00 6:17:36 AM #29 SCSI -1169 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03E12298 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x07 6:17:37 AM #30 CDR -1114 File WriterStatus.cpp, Line 167 Reset occurred GENERIC DVD DUAL 4XMax\H2 T0 6:17:37 AM #31 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 6:18:07 AM #32 CDR -1175 File Cdrdrv.cpp, Line 1240 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 5A 00 05 00 00 00 00 00 48 00 00 00 6:18:07 AM #33 SCSI -1169 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03E12298 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x07 6:18:08 AM #34 CDR -1169 File WriterStatus.cpp, Line 172 Logical unit not ready, operation in progress 6:18:08 AM #35 TRANSFER -39 File WriterStatus.cpp, Line 172 Could not perform EndSession 6:19:36 AM #36 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You need to EDIT out your Nero serial before someone hacked it and use it for free. I have no idea what kind of burner you have here. However, you need to make sure that your burner has the latest firmware. I suggest going to Manufacture's website and download any available firmware, if not, then try this http://forum.rpc1.org/dl_all.php I recommend customize your size to 4400MB at the max with high quality media like authentic Taiyo Yuden, Verbatim "advanced azo" or "datalife plus" or Maxell (made in japan by Hitachi Corp.) -- I've burned over a thousand using those 3 top notch media and I've never experienced any issues and or coasters whatsoever. Again, Fuji is "decent/good" media, but you'll need to make sure it's "Made In Japan", if it's made in Japn, then that's genuine YUDEN media. Otherwise, I would never buy it -- all my media's top priority is "Made In Japan", unless it's Verbatim then that's another story. Try other high quality as mentioned above and try to burn at 4X (4X is the best and safest and or most recommended). You need to dump InCD -- InCD is horrible, it will only conflicts with Nero when you're buring. Go here http://www.nero.com/nero6/enu/InCD_CleanTool.html and get InCD General Clean Tool and run it completely wipe out any InCD from your system.
thanks for the advise, i will uninstall incd, and get better media. i am have a hard time tying to find best firmware for this burner. i'll keep you posted
With that id string the burner has just about got to be an iomagic. For firmware for it you can go here if it is infact an iomagic. http://www.iomagic.com/Firmware/FirmwareDownload.html
everytiime i try to update the firmware, it gives me an error, "send data to device error" any suggestions???
That is the most of your problems. Usb 1 is no good for dvd burning. To flash the firmware put it back inside the computer. For burning leave it inside the computer or get a usb 2.0 card to hook it to.
i just tried the dirve speed test, and that also gave me an error " power on, reset, or bus device reset occurred (062900)" if this is any usrful.
well that is true. it has never been in desktop, i only have 2 laptops, or i should say had 2 laptops, my first one did have USB 2.0, and it worked fine. that for the advice, i'l go get a USB 2.0 card
Thats because it wants faster transfer then usb 1 can give it. I dont remember what usb 1 was rated at I remember 1.1 was rated at up to 11 mbs but in real world we where lucky to get 5 on a steady basis.
ok i got a USB 2.0 PCMCIA card, and still when i try to update the firmware, it is giving me " send data to device" error, can anyone think of a work around?
Iomagic as well as many others that did not come in external boxes have problems trying to flash the firmware in a usb box. You may need to find a friend that will let you hook it up in there computer to flash it. Are you still having trouble burning after getting 2.0 card? And needing to update or just want to have the newer firmware.
yeah I wanted to get the newer firmware. I tried to copy some anime files, it got about half way through, and gave me some tracking error, I forgot to save the log, but I'll see if I can use a desktop to update the firmware. thanks for all the help, and I'll still keep ya posted.
