OOkay...im burning and i have all ready defraged and shut down all programs..i have a samsung ts-h552b CD/dvdw drive and i keep getting buffer underrun...The thing is that the used buffer is at 98% in nero which i use to burn it but the cd buffer goes as far as 50% and keeps moving between that an zero and takes near an hour to burn any dvd. With any other program it will stop after 4% and say buffer under run..nero has buffer under run tools to stop that but does anyone know what may be the issue? Im using samsung dvdr's and memorax cdr which both have an issue as far as the dvd buffer being limited during burning process. Plerase HELP! DVDw log Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.4 Internal Version: 7, 0, 1, 4 Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 7.0.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 7.0.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 2 ID 0 DMA: Off DiskPeripheral : ST3160021A atapi Port 3 ID 0 DMA: On DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552B E: CDRom0 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981488kB) Free physical memory: 598MB (612724kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.12.2005 UDF/ISO compilation 11:23:47 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation started 11:23:47 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation completed (no file modified) 11:23:47 PM #3 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:23:47 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725 DVD-Video files sorted 11:23:47 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 81920KB of Memory 11:23:47 PM #6 Text 0 File Reader.cpp, Line 124 Reader running 11:23:47 PM #7 Text 0 File Writer.cpp, Line 113 Writer E: TSSTcorp CD/DVDW TS-H552B running 11:23:47 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:23:47 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:23:47 PM #10 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using DVD media 11:23:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2289439 (508:45.64, 4471MB) 11:23:48 PM #12 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 11:23:48 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 11:23:48 PM #14 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:23:48 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2289440 (2289440) = #2289440/508:45.65 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289440 blocks [E: TSSTcorp CD/DVDW TS-H552B] -------------------------------------------------------------- 11:23:48 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4688773120, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2289440 | lead-out | 1 | 0x41 | 0x00 11:23:48 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:23:48 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 11:23:48 PM #19 Text 0 File Burncd.cpp, Line 4176 Cache writing successful. 11:23:48 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 11:23:48 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 4x (5,540 KB/s) 11:23:48 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 323 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x046f8c00: Len x4000 11:23:48 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:23:48 PM #24 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 11:23:48 PM #25 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 11:23:48 PM #26 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 11:23:48 PM #27 Text 0 File DVDR.cpp, Line 7068 Drive: TSSTcorp CD/DVDW TS-H552B Book Type request [TSST]: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:23:48 PM #28 CDR -1207 File DVDR.cpp, Line 5330 Book Type automatically set to: DVD-ROM 11:23:48 PM #29 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 12:29:45 AM #30 Text 0 File WriterStatus.cpp, Line 116 <E: TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2289440 (22EF20h), length 0 blocks 12:29:45 AM #31 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:30:12 AM #32 Phase 37 File dlgbrnst.cpp, Line 1725 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
edit out the nero serail number and your burner is in NOT in DMA mode enable DMA,if its not an external burner DMA mode my comp/control panel/system/hardware/device manager...click on ide/atapi controllers....right click on the ide channel../properties/advanced settings = DMA???? if in pio mode and DMA is greyed out,you may need to unistall the ide channel which controls the drive and re-boot the pc
oaky...well changing to DMA would help..just one major issue...the primary ide are on DMA and i have two primary ide drivers?? (is that right) The two secondary ide's are set to dma but on the mode is set to PIO only and everytime i change it...the computer crashs...if i uninstall the driver and reinstall it...windows fails to load on the next boot and i have to install it back from safe mode back to pio mode. Please help. =(
uninstall controller not channels and reboot! abd update your motherboard drivers for ides! is your drive a USB?
Thanks...i believe that WORKED!! beautiful. thanks. the dual controller was the issue and i uninstalled it and presto. The dma issue is no more..its working...THANKS AGAIN. =)
- also, you're burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
grrr...another issue...its seems that i cant change to DMA on the IDE in windows i checked the bios set and i do have the option but everytime i change it in windows..it crashs. Then i uninstalled the CONTROLLER AND driver and reinstalled it again but same issue...what am i missing here..i have to reboot in windows safe mode to restore original settings to get windows to boot and only seems to work in PIO mode...please help. I cant find any updates for my mother board anywhere....=( MS-7093/MS-7184 Motherboard, amd sempron.
I didnt install the drive but i did install a slave harddrive..i'll have to check the cable connections and the jumpers..that may be the case..i'll check and let you know the out come..
