ok while having successful completed over 150 burns using DVD Shrink and DVD decrypter I am now forced to find a new method so after some nooping read that DVD Fab was a good way to go with still using Shrink and now Nero. So I Used DVD Fab, then Shrink in the usual process, then it switches to Nero automatically gets about 30% through the burn and I get the following error message this isnt the first movie that I have gotten this message from and with this being a somewhat older title i dont think that encryption is a problem... PLEASE HELP>>>> 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 3:03:20 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:34 AM Nero API version: 6.6.0.8 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 4R080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : SAMSUNG SV0411N atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : LG CD-RW CED-8083B atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S G: CDRom0 LG CD-RW CED-8083B H: CDRom1 Generic DVD-ROM I: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 399MB (409280kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.12.2005 NeroAPI 11:51:31 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 11:51:31 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 11:51:31 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 11:51:31 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 11:51:31 PM #5 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1633S running 11:51:31 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 11:51:31 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 11:51:31 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 11:51:31 PM #9 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 11:51:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2111567 (469:14.17, 4124MB) 11:51:31 PM #11 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO 11:51:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 11:51:32 PM #13 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:51:32 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2111568 (2111568) = #2111568/469:14.18 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2111568 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 11:51:32 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4324491264, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2111568 | lead-out | 1 | 0x41 | 0x00 11:51:33 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 11:51:33 PM #17 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 11:51:33 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 11:51:33 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 8x (11,080 KB/s) 11:51:33 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:51:33 PM #21 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 11:51:33 PM #22 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 11:51:33 PM #23 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 11:51:33 PM #24 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:52:09 PM #25 Text 0 File Cdrdrv.cpp, Line 1287 23:52:09.262 - LITE-ON DVDRW SOHW-1633S\H1 T0 : Queue again later 11:55:20 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x015B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x0F 0x80 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:55:20 PM #27 CDR -1046 File Writer.cpp, Line 311 Illegal disc 11:55:20 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:55:20 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:55:20 PM #30 Text 0 File DVDR.cpp, Line 2603 EndDAO: Last written address was 3967 11:55:20 PM #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 8x (11,080 KB/s) 11:55:20 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 11:55:20 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 2:05:10 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/10/2005 3:04:10 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) that is the error message from Nero that I get also I have tried 2 different brands of media with no change any suggestions????
Your Nero is out of date, current is 6.6.0.18. Update it. Your firmware is also out of date, current BSOY. Here is link to it: http://forum.rpc1.org/dl_firmware.php?download_id=1934 Your DMA is off, try this: http://www.burstcopy.com/dma/xp/ If that doesn't work then try this guide written by alkohol: ((To enable DMA back ON by "uninstalling" it's driver “for Win XP users”)) A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES" B) left click on "HARDWARE", left click on "DEVICE MANAGER" C) left click on + sign of DVD/CD-ROM Drives D) double left click on your DVD burner or your dvd-rom drive E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer F) once you restart your computer, Windows should automatically detect your DVD burner’s drive and re-install it for you. That's it...easy as smoking!! NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the “IDE ATA/ATAPI Controllers” (A) left click on + sign of "IDE ATA/ATAPI Controllers" (B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel") (C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!! ***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps. I see you are using CMC media, it's one of the biggest media companies out there you know. It's also one of the worst. Switch to something like Taiyo Yuden or Verbatim. SOny Fuji and Maxell are fine if they are made in Japan. Try 4x, even w/ good media 8x is tricky. Edit out your serial number
wanted to thank everyone did as everyone had suggested in order and updating NERO was the trick. Thank you all that responded for your help!
