I have purchased a new Lite-On 1635S external burner. I have not successfully burned one disk...have created many coasters..and am frustrated. I have received several messages...orginally it was...can not perform end of disk-at-once. I have turned this function "off" in my settings hoping that would solve the problem. Didn't. I also updated firmware... I have tried different burning speeds...have tried Sony, Verbatim - R and + R, Memorex +RW disks. My original burner was a Sony...that died, (I think -- had problems with that burner too..at least I was able to burn with it at first)..and was using My DVD. Have uninstalled MyDVD. As mentioned above, I have an external burner...connected by USB 1.1 port. This could be the problem... Have included my log from the last attempt. Have contact Nero Support..and sent log to them. No word...been several days... Your help is greatly appreciated. ==================================================================== 1A20-0218-0* 1A20-0218-0* Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0V - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8160B F: CDRom0 TEAC CD-W524E G: CDRom1 LITE-ON DVDRW SHW-1635S H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523808kB) Free physical memory: 164MB (168564kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 31.12.2005 UDF/ISO compilation 4:51:48 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 4:51:48 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 4:51:48 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 4:51:48 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 4:51:49 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 4:51:49 PM #6 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SHW-1635S running 4:51:49 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 4:51:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 4:51:49 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 4:51:51 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 752191 (167:09.16, 1469MB) 4:51:51 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: DVD) 4:51:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 1 4:51:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:51:51 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 752192 (752192) = #752192/167:9.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 752192 blocks [LITE-ON DVDRW SHW-1635S] -------------------------------------------------------------- 4:51:51 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540489216, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 752192 | lead-out | 1 | 0x41 | 0x00 4:51:52 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 4:51:52 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 4:51:52 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 4:51:52 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 4:51:52 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:51:52 PM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: embossed data (Read-only) Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9 23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(... 6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............ 4:52:03 PM #22 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SHW-1635S Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0, Mode 2 return code 0 4:52:03 PM #23 CDR -1211 File DVDR.cpp, Line 5297 Book Type set to: DVD-ROM 4:52:03 PM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 5:13:20 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x06E00000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 5:13:22 PM #26 Text 0 File Cdrdrv.cpp, Line 1288 17:13:22.015 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later 5:13:24 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C1D0E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x28 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x28 0x00 5:13:24 PM #28 CDR -1076 File Writer.cpp, Line 311 Disc changed 5:13:24 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:13:24 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 5:13:24 PM #31 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SHW-1635S Book Type request [LO], rev 3: DVD+RW Changing the Book Type was finished successfully, return code 0 5:13:24 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I see something in your log that can/will cause problems: You have Nero's INCD packet writing software installed and it conflicts with Nero (go figure that one?). It needs to be completely un-installed using Nero's incd zapper: http://www.nero.com/nero6/enu/InCD_CleanTool.html Your memory available was a little low, but shouldn't have caused this problem. See if removing INCD helps, it needs to go anyway.
Here's hoping MaxBurn can help me out as well? I'm new to this site and hoping that it will be of great help to me. I'v been using DVD Decrypter and DVD shrink for some time now with no problems...until recently. More specifically I can decrypt, it appears to shrink but can't complete the burn? I'm confused and am wondering what I need to change to get over this problem. The last dvd I tried working with was Batman Begins and here's the message I received(see below). This jargon means little to me so I'm hoping you can help? Thanks in advance! Burn Process failed at 4x 5,540 kb/s 1A20-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 04:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero API version: 6.6.0.16 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 16b Recorder: <BENQ DVD DUAL DW1610> Version: B8T9 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : QUANTUM FIREBALLlct20 40 atapi Port 0 ID 0 DMA: On CdRomPeripheral : BENQ DVD DUAL DW1610 atapi Port 1 ID 0 DMA: On CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === BENQ DVD DUAL DW1610 E: CDRom0 ASUS CRW-5232AS F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261680kB) Free physical memory: 80MB (82284kB) Memory in use : 68 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.1.2006 NeroAPI 16:21:28 #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 16:21:28 #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 16:21:28 #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 16:21:30 #4 Text 0 File Reader.cpp, Line 127 Reader running 16:21:30 #5 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DUAL DW1610 running 16:21:30 #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 16:21:30 #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 16:21:30 #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 16:21:30 #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 16:21:31 #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286111 (508:01.36, 4465MB) 16:21:31 #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 16:21:31 #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: BENQ DVD DUAL DW1610, Media type: DVD-R Disc Manufacturer: CMC MA - G. AF1 Disc Application Code: 64, Disc Physical Code: 193 16:21:31 #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 16:21:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [BENQ DVD DUAL DW1610] -------------------------------------------------------------- 16:21:31 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [BENQ DVD DUAL DW1610] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 16:21:34 #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 16:21:34 #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 16:21:34 #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 16:21:34 #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 16:21:34 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 16:21:34 #21 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 16:21:34 #22 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Seamless Link -> ON 16:21:34 #23 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 16:21:34 #24 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 16:24:46 #25 SCSI -1135 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00C90000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x03 0xD0 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 16:24:46 #26 CDR -1135 File Writer.cpp, Line 311 Write error 16:24:46 #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 16:24:46 #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 16:24:47 #29 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 249855 16:24:47 #30 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 4x (5,540 KB/s) 16:24:47 #31 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 16:24:47 #32 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11:53:28 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11:53:04 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11:53:30 (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDR
MaxBurn....I downloaded Nero INCD clean tool...and deleted program(s)per your request. Tried a burn....still no luck.....I notice these errors...(below) Have also sent the new complete log... Any other suggestions.... Thanks again for your help.... Trying to burn pictures/movies of my niece's wedding in San Diego. Want to send to her ASAP. In my previous attempts...the burn goes to about 70%....and can view that in much in the DVD player....the menu's are created...pictdures OK..music OK...but the movie stops just after the ceremony. Reeb ==================================================== 12:21:28 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B840000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x04 0x22 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 =================================================================== New Log =================================================================== 1A20-0218-0 1A20-0218-0 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0V - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8160B F: CDRom0 TEAC CD-W524E G: CDRom1 LITE-ON DVDRW SHW-1635S H: CDRom4 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523808kB) Free physical memory: 150MB (153704kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 31.12.2005 UDF/ISO compilation 12:11:04 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 12:11:05 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 12:11:05 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 12:11:05 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 12:11:05 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 12:11:05 PM #6 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SHW-1635S running 12:11:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:11:06 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:11:06 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:11:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 752191 (167:09.16, 1469MB) 12:11:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: DVD) 12:11:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 1 12:11:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:11:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 752192 (752192) = #752192/167:9.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 752192 blocks [LITE-ON DVDRW SHW-1635S] -------------------------------------------------------------- 12:11:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540489216, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 752192 | lead-out | 1 | 0x41 | 0x00 12:11:09 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:11:09 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 12:11:09 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:11:10 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 12:11:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:11:10 PM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: embossed data (Read-only) Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9 23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(... 6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............ 12:11:13 PM #22 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SHW-1635S Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0, Mode 2 return code 0 12:11:13 PM #23 CDR -1211 File DVDR.cpp, Line 5297 Book Type set to: DVD-ROM 12:11:13 PM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 12:21:28 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B840000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x04 0x22 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:21:30 PM #26 Text 0 File Cdrdrv.cpp, Line 1288 12:21:30.218 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later 12:21:33 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C1E0E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x28 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x04 0x22 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x28 0x00 12:21:33 PM #28 CDR -1076 File Writer.cpp, Line 311 Disc changed 12:21:33 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:21:33 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:21:33 PM #31 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SHW-1635S Book Type request [LO], rev 3: DVD+RW Changing the Book Type was finished successfully, return code 0 12:21:33 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@tracker33 - i've edited out your serial number.. - Nero's a couple versions out of date, latest 6.x version is 6.6.0.18, you might want to download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php being as you need to get rid of Nero's InCD anyway (see my last comment) - if you have the "Bulk" Version of this burner (ie if the BenQ brand is [bold]not[/bold] displayed on the tray of the drive) then your burners' firmware's out of date, G8T9, dated 8th Jun 2005, is here - http://www.benq.us/ServiceAndSupport However if you have the "Retail" Version of this burner (ie if the BenQ brand [bold]is[/bold] displayed on the tray of the drive) then your firmware is up to date. - 512MB is what i consider the minimum for dvd work. you should get more memory, and for now you're gonna have to dig deep to close down as much as you can to free up more memory - you're burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space - what can i say, these are some of the most awful atrocious, utter rubbish dvd media you can buy, and you bought them! (sorry but they're awful, glance at my signature where CMC discs play the starring roles) - see previous comment - InCD is Nero's 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD. As i said further up the reply, you may want to update to 6.6.0.18 (if you have broadband, the update is about 100MB)
@REEB your aspi layer needs updated get aspi here - http://www.adaptec.com/worldwide/su...SPI-4.70&sess=no&prodkey=Windows+ASPI+Package your still need to uninstall nero, use nero clean tool, reinstall nero without incd peace
Thanks..BigFatBoy.....I tried downloading the updated ASPI....per your suggestion. Got it downloaded...was following instructions on their website....but when I opened the INSTALL.BAT file...the command box would not let me add the "text" they suggested on their website...and when I hit a key...the box closed without any execution. "Run from the menu, and then the Browse button. Locate the INSTALL.BAT file in the directory the files extracted to and select the OPEN button. In the command box, add a space and either XP32 for Pentium I/II/III/IV processors or XP64 for Itanium processors. The command should look like: c:\adaptec\aspi\install.bat XP32 or c:\adaptec\aspi\install.bat XP64. Then select the OK button to run the XP installer." As stated above...couldn't add the line...and no OK button. I had sent the wrong log...and the new one shows the INCD gone... Any other suggestions... Reeb ============================================================ 1A20-0 1A20-0 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0V - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8160B F: CDRom0 TEAC CD-W524E G: CDRom1 LITE-ON DVDRW SHW-1635S H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523808kB) Free physical memory: 311MB (318500kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.1.2006 UDF/ISO compilation 11:19:46 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 11:19:47 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 11:19:47 AM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:19:47 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 11:19:47 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 11:19:47 AM #6 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SHW-1635S running 11:19:48 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:19:48 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:19:48 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:19:49 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 752191 (167:09.16, 1469MB) 11:19:49 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: DVD) 11:19:49 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 1 11:19:49 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:19:50 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 752192 (752192) = #752192/167:9.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 752192 blocks [LITE-ON DVDRW SHW-1635S] -------------------------------------------------------------- 11:19:50 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540489216, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 752192 | lead-out | 1 | 0x41 | 0x00 11:19:51 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:19:51 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 11:19:51 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:19:51 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 11:19:51 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:19:51 AM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: embossed data (Read-only) Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9 23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(... 6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............ 11:19:56 AM #22 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SHW-1635S Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0, Mode 2 return code 0 11:19:56 AM #23 CDR -1211 File DVDR.cpp, Line 5297 Book Type set to: DVD-ROM 11:19:56 AM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 11:40:08 AM #25 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B860000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 11:40:10 AM #26 Text 0 File Cdrdrv.cpp, Line 1288 11:40:10.265 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later 11:40:13 AM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03350200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x28 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x28 0x00 11:40:13 AM #28 CDR -1076 File Writer.cpp, Line 311 Disc changed 11:40:14 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:40:18 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:40:19 AM #31 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SHW-1635S Book Type request [LO], rev 3: DVD+RW Changing the Book Type was finished successfully, return code 0 11:40:19 AM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Bigfatboy: Got the ASPI driver updated....instructions on their website were incorrect. You have to open the "aspiinst.exe" file...it updates/extracts itself. With the update...tried a couple of more burns....failed again.... back to square one.....making more coasters... Reeb
Sorry for getting in here late guys, but i was burning some CDs and DVDs and only have one computer now, so i wasn't on the net. @REEB Try this ASPI link, your system aspi is corrupted. See the ??? in there? It means your system ASPI is still corrupted, and this will cause a failed burn easily, all by itself. and in vers 6 this ? is ok only if your burner is external and you stated earlier it was. The force aspi tool might be a better fix for you. http://www.afterdawn.com/software/cdr_software/cdr_tools/frcaspi.cfm Its called force aspi 1.7 and heres part of the description It works when other attempts to fix system ASPI fails. Everything else looks pretty good in your last log. This one says force aspi 1.8 but i haven't used it. http://force_aspi_18.w.interia.pl/ Also Nero has its own aspi and it works fine: http://www.nero.com/nero6/enu/WNASPI32.DLL.html or http://www.nero.com/nero6/enu/NEASPIEN.EXE.html that one supposed to have instructions with it. Also, if it hasn't been answered, a USB 1.1 is def not the way to go for DVD burning on an external. It will limit your data transfer rate, and that will limit your burn speed. You should have at least a USB 2, or firewire connection for an external.
MaxBurn....sending my last log....didn't on the previous post..this shows the updated ASPI...might try changing to your other suggestions..but this current one shows "ok"... Interestingly, the burn always stops at the exact same spot in the creation of the dvd pictures/movie....at 71%. Maybe the problem is with the actual video file. I am trying to burn off of the HD. I tried the rendering/burning...but that was taking 1 1/2 hours..to see if it worked. So...I copied to the HD..and am burning from it which takes about 30 minutes. No one has addressed this error message below....could that be the problem???? Thanks for your help... Reeb =================partial log============================ 8:39:33 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B850000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 8:39:34 PM #26 Text 0 File Cdrdrv.cpp, Line 1288 20:39:34.453 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later 8:39:36 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03350200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x28 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x28 0x00 8:39:36 PM #28 CDR -1076 File Writer.cpp, Line 311 Disc changed 8:39:36 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:39:37 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:39:37 PM #31 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SHW-1635S Book Type request [LO], rev 3: DVD+RW Changing the Book Type was finished successfully, return code 0 8:39:37 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) ==========================Complete log========================== 1A20-0 1A20-0 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0V - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8160B F: CDRom0 TEAC CD-W524E G: CDRom1 LITE-ON DVDRW SHW-1635S H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523808kB) Free physical memory: 246MB (252256kB) Memory in use : 51 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.1.2006 UDF/ISO compilation 8:18:07 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 8:18:07 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 8:18:07 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 8:18:07 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 8:18:07 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 8:18:07 PM #6 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SHW-1635S running 8:18:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:18:07 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:18:08 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 8:18:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 752191 (167:09.16, 1469MB) 8:18:09 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD DVD) 8:18:09 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 1 8:18:09 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:18:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 752192 (752192) = #752192/167:9.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 752192 blocks [LITE-ON DVDRW SHW-1635S] -------------------------------------------------------------- 8:18:10 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540489216, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 752192 | lead-out | 1 | 0x41 | 0x00 8:18:10 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:18:10 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 8:18:10 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:18:10 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 8:18:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:18:10 PM #21 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: embossed data (Read-only) Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9 23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(... 6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............ 8:18:15 PM #22 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SHW-1635S Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0, Mode 2 return code 0 8:18:15 PM #23 CDR -1211 File DVDR.cpp, Line 5297 Book Type set to: DVD-ROM 8:18:16 PM #24 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 8:39:33 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B850000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 8:39:34 PM #26 Text 0 File Cdrdrv.cpp, Line 1288 20:39:34.453 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later 8:39:36 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03350200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x28 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x28 0x00 8:39:36 PM #28 CDR -1076 File Writer.cpp, Line 311 Disc changed 8:39:36 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:39:37 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:39:37 PM #31 Text 0 File DVDR.cpp, Line 5876 Drive: LITE-ON DVDRW SHW-1635S Book Type request [LO], rev 3: DVD+RW Changing the Book Type was finished successfully, return code 0 8:39:37 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Still making coasters....tried all suggestions.....any others before I put this thing back in the box and take it back to Circus City?? Appreciate all help... Reeb
In your last log, i couldn't see anything major that would cause a failed burn. That last error you pointed out comes back as and this is what is stated about that error code Before you go changing out things, try different media. Sometimes that is the only problem, and in your case we are getting down to media or drive. I would try different GOOD media first. Your other drive looks like a ROM drive, so we cant use it for burn testing. Maybe you have a bad drive, since you never got a good burn from it. If you get down to replacing the drive, i would go with an internal, as you only have USB 1.1 . Internal drives are easy to install. On my computer it was loosen 2 thumb screws on the case, remove 2 screws holding the drive, remove 2 cables. Install was the reverse of that. Took me all of 10 minutes. You should be able to get a refund on the external, and with that money you can get an internal (they are also usually cheaper than externals) Try different media first.
MaxBurn--- I had MyDvd installed...and had previously used it with a Sony DVD burner which is now defunked. I uninstalled MyDvd per a suggestion that it might be interferring with the NERO. I could reinstall and try it again... Any advice here?? Reeb
