Hello Everyone, I can no longer burn dvd-r's. I have been burning fine for months and all of a sudden I can no longer. Any help you can provide is greatly appreciated. I have included my log file. ==================== Nero Log Start ======================== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PIONEER DVD-ROM DVD-106 >Version: 1.09 - HA 1 TA 1 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : TDK DVDRW0404N atapi Port 1 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-ROM DVD-106 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TDK DVDRW0404N G: CDRom0 PIONEER DVD-ROM DVD-106 H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 609MB (624372kB) Memory in use : 40 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.1.2006 UDF/ISO compilation 3:53:52 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation started 3:53:52 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725 DVD-Video files reallocation completed (no file modified) 3:53:52 PM #3 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 3:53:52 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725 DVD-Video files sorted 3:53:52 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 3:53:52 PM #6 Text 0 File Reader.cpp, Line 124 Reader running 3:53:52 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:53:52 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:53:52 PM #9 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 3:53:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1756687 (390:22.37, 3431MB) 3:53:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 3:53:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: TDK DVDRW0404N, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 3:53:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:53:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1756688 (1756688) = #1756688/390:22.38 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1756688 blocks [G: TDK DVDRW0404N] -------------------------------------------------------------- 3:53:53 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [G: TDK DVDRW0404N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3597697024, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1756688 | lead-out | 1 | 0x41 | 0x00 3:53:53 PM #16 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:53:53 PM #17 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 3:53:53 PM #18 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 3:53:53 PM #19 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 3:53:53 PM #20 Phase 32 File dlgbrnst.cpp, Line 1725 Simulation started at 2.4x (3,324 KB/s) 3:53:53 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:53:53 PM #22 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode for Multisession 3:53:53 PM #23 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer underrun protection -> ON 3:53:53 PM #24 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: No 3:53:53 PM #25 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:53:53 PM #26 SPTI -1046 File SCSIPassThrough.cpp, Line 323 G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 1A CE 10 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 3:53:53 PM #27 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc G: TDK DVDRW0404N 3:53:53 PM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 3:53:53 PM #29 Phase 34 File dlgbrnst.cpp, Line 1725 Simulation failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ================ Nero Log End ===========================
They should be illegal! Also vers 7 of nero is now 7.0.1.4b http://www.nero.com/nero7/enu/nero7-demo.php
Ok. Thanks. I will get some Taiyo Yuden media and give that a try. Also, I noticed a question mark on the line below? Is this a possible problem? (Taken from the Log) Bus Type : default (0) -> ATAPI, detected: ? Thanks for your help!
No, that's not the problem in this case. The real culprit is the media aka CMC MAG, which is the one you're using now. Try other high quality media like Taiyo Yuden, Verbatim "advanced azo/datalife plus" and Maxell (mij by Hitachi) for your next dvd burning project. Make sure you keep your burning speed to 4X, yes... that's one of the best speed and most recommended for dvd burning. Good luck!!
Hey Alkohol ! @mv202 Yep, media can make all the difference with DVD burning. Use stuff like CMC, and you take chances. Some ppl swear by them, others swear at them (guess which side im on? ). I make no bones about how i hate the stuff, because it failed for me, and i found out later after finding AD, MANY OTHERS. So it wasn't just something i was doing, other than using bad media. I learned, and haven't produced a coaster because of media (other than when i tried a 16x burn, but thats another story). And for some reason Nero 7 logs show that ? there. On vers 6 it used to show a problem with your system ASPI layer, unless the drive was external. Now, im not sure what that shows that is of use in troubleshooting. To me its kind of like a warning light that always stays on.. pretty soon you ignore it. If you were concerned, you could run nero's info tool, and check your aspi with that tool. You should see something like this on your info tool: Also here is what AD says about ASPI layers and how to install them: http://www.afterdawn.com/guides/archive/aspisetup.cfm http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm http://www.afterdawn.com/software/cdr_software/cdr_tools/frcaspi.cfm and a link to aspi discussed in more detail with links http://www.ncf.carleton.ca/~aa571/aspi.htm just in case...
whompus, MaxBurn, alkohol, Thanks a lot for all of the information. I tried a verbatim disc today and it worked! Too bad I already purchased a 100pack of the memorex cmc disks. After reading your posts I have been convinced to buy better media from now on. Thanks!
mv202 Glad you are burning again. That is why we suggest using good media. Sometimes the main problem is [bold]the media[/bold], and CMC is one of those problem medias. Stick with the good stuff, and your burning problems will be few and far between.
