1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero Playing Up

Discussion in 'Nero discussion' started by boong, Jan 9, 2006.

  1. boong

    boong Member

    Joined:
    Dec 13, 2004
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    Ok here's how the story starts:

    I created and burnt a dvd properly before, but on the disc it was a bit skippy at some points. I am not sure what it is, but I put another dvd disc in, but this time i told Nero to do a simulation, and I tried it at 2 different speeds, high and low (the log i have below is for the fastest speed). After the simulation reached 100%, it said 'Burn process failed at *whatever the speed was*.'

    All I had was this log that I have no idea of figuring out on my own. Nero didn't tell me what went wrong with the burn, but I think it may be something to do with the program, not the discs I'm using, because it hadn't even reached the point of burning it to a disc before it said failed.

    I guess if someone is going to help me I need a question; how can I fix this problem?




    Before you look at the log, I am guessing this part might be the immediate problem:

    6:38:59 AM #35 CDR -1066 File ThreadedTransferInterface.cpp, Line 1586
    Invalid field in command

    6:38:59 AM #36 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1586
    Invalid track info




    Here is the log:




    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 6.3.1.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <d347prt> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H552 D: CDRom0
    Generic DVD-ROM E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 135MB (138944kB)
    Memory in use : 73 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.1.2006
    UDF/ISO compilation
    6:35:04 AM #1 Phase 112 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation started

    6:35:04 AM #2 Phase 114 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation completed (no file modified)

    6:35:04 AM #3 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    6:35:04 AM #4 Phase 111 File dlgbrnst.cpp, Line 1845
    DVD-Video files sorted

    6:35:04 AM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    6:35:04 AM #6 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H552B running

    6:35:04 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    6:35:04 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    6:35:04 AM #9 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    6:35:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 969199 (215:22.49, 1892MB)

    6:35:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD)

    6:35:05 AM #12 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    6:35:05 AM #13 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:35:05 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 969200 (969200) = #969200/215:22.50
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 969200 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    6:35:05 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1984921600, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    969200 | lead-out | 1 | 0x00 | 0x41

    6:35:05 AM #16 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    6:35:05 AM #17 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    6:35:05 AM #18 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    6:35:05 AM #19 Phase 32 File dlgbrnst.cpp, Line 1845
    Simulation started at 8x (11,080 KB/s)

    6:35:05 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:35:05 AM #21 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 3:09,927 (189927ms) -> OK

    6:35:05 AM #22 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    6:35:05 AM #23 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: Super Link -> ON

    6:35:05 AM #24 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:35:05 AM #25 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:35:12 AM #26 Text 0 File Cdrdrv.cpp, Line 1294
    06:35:12.203 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later

    6:38:47 AM #27 Text 0 File WriterStatus.cpp, Line 115
    <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 969200 (EC9F0h), lenght 0 blocks

    6:38:47 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    6:38:47 AM #29 Text 0 File DVDR.cpp, Line 2304
    EndDAO: Last written address was 969199

    6:38:58 AM #30 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    6:38:58 AM #31 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    6:38:58 AM #32 Phase 33 File dlgbrnst.cpp, Line 1845
    Simulation completed successfully at 8x (11,080 KB/s)

    6:38:59 AM #33 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 8x (11,080 KB/s)

    6:38:59 AM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:38:59 AM #35 CDR -1066 File ThreadedTransferInterface.cpp, Line 1586
    Invalid field in command

    6:38:59 AM #36 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1586
    Invalid track info

    6:38:59 AM #37 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    6:38:59 AM #38 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 6/01/2006 2:22:03 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 0, size=91136 bytes, created 4/06/2004 1:36:50 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 0, size=28544 bytes, created 4/06/2004 1:37:30 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 0, size=5760 bytes, created 4/06/2004 1:40:42 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 11:59:44 PM (Adapter driver for rec)
    File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 4:31:48 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Jan 9, 2006
    boong, Jan 9, 2006
    #1
  2. boong

    boong Member

    Joined:
    Dec 13, 2004
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    I'm really anxious for a reply has anybody thought of a solution yet?
     
    boong, Jan 9, 2006
    #2
  3. whompus

    whompus Active member

    Joined:
    Dec 2, 2002
    Messages:
    1,346
    Likes Received:
    0
    Trophy Points:
    66
    It seems something is interfering with the burn. May be incd I reccomend removing it via nero clean tools. May also be that d347prt.sys imulation driver. First thing to try is get enditall2 and run it before burning to end processes. If that helps the burn then look into removing one or both of those. I say if you dont use packet writing its best to remove incd anyway.
     
    whompus, Jan 9, 2006
    #3
  4. boong

    boong Member

    Joined:
    Dec 13, 2004
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    Ok thanks mate I'll give it a try and I'll get back to you with the results :)
     
    boong, Jan 9, 2006
    #4
  5. boong

    boong Member

    Joined:
    Dec 13, 2004
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    Crap it didn't work, I used that enditall2 tool, burn thingy didn't work. I disabled the emulation drive from Daemon Tools, I uninstalled InCD with the Clean Tools thing, and it didn't work. Should I try using another burning program to rule out the fact that its not my hardware? Can you recommend a good one?

    BTW heres the last log


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 6.3.1.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.18
    Adapter driver: <d347prt> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H552 D: CDRom0
    Generic DVD-ROM E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 138MB (141808kB)
    Memory in use : 72 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.1.2006
    UDF/ISO compilation
    7:36:05 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation started

    7:36:05 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation completed (no file modified)

    7:36:05 PM #3 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    7:36:05 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
    DVD-Video files sorted

    7:36:05 PM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    7:36:05 PM #6 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H552B running

    7:36:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    7:36:05 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    7:36:05 PM #9 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    7:36:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 969199 (215:22.49, 1892MB)

    7:36:05 PM #11 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD)

    7:36:05 PM #12 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    7:36:05 PM #13 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:36:05 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 969200 (969200) = #969200/215:22.50
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 969200 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    7:36:05 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1984921600, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    969200 | lead-out | 1 | 0x00 | 0x41

    7:36:05 PM #16 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    7:36:05 PM #17 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    7:36:05 PM #18 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    7:36:05 PM #19 Phase 32 File dlgbrnst.cpp, Line 1845
    Simulation started at 8x (11,080 KB/s)

    7:36:06 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:36:06 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 3:09,927 (189927ms) -> OK

    7:36:06 PM #22 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    7:36:06 PM #23 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: Super Link -> ON

    7:36:06 PM #24 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:36:06 PM #25 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:36:22 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
    19:36:22.968 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later

    7:39:57 PM #27 Text 0 File WriterStatus.cpp, Line 115
    <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 969200 (EC9F0h), lenght 0 blocks

    7:39:57 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    7:39:57 PM #29 Text 0 File DVDR.cpp, Line 2304
    EndDAO: Last written address was 969199

    7:40:09 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    7:40:09 PM #31 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    7:40:09 PM #32 Phase 33 File dlgbrnst.cpp, Line 1845
    Simulation completed successfully at 8x (11,080 KB/s)

    7:40:10 PM #33 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 8x (11,080 KB/s)

    7:40:10 PM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:40:10 PM #35 CDR -1066 File ThreadedTransferInterface.cpp, Line 1586
    Invalid field in command

    7:40:10 PM #36 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1586
    Invalid track info

    7:40:10 PM #37 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    7:40:10 PM #38 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 6/01/2006 2:22:03 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 0, size=91136 bytes, created 4/06/2004 1:36:50 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 0, size=28544 bytes, created 4/06/2004 1:37:30 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 0, size=5760 bytes, created 4/06/2004 1:40:42 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 11:59:44 PM (Adapter driver for rec)
    File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 4:31:48 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Jan 9, 2006
    boong, Jan 9, 2006
    #5
  6. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    995
    Likes Received:
    0
    Trophy Points:
    66
    TSSTcorp CD/DVDW what make is your dvd-rw ? have you burned a dvd before
    with out any problems never heard of that make of dvd-rw.......
     
    killalot, Jan 9, 2006
    #6
  7. whompus

    whompus Active member

    Joined:
    Dec 2, 2002
    Messages:
    1,346
    Likes Received:
    0
    Trophy Points:
    66
    This is an imulation isnt it?

    This tells me you still have a lot runing in background. Did you click the skull and crossbones in enditall2?

    This say incd is not uninstalled.

    Isnt that a driver for a cd imulation?
     
    Last edited: Jan 9, 2006
    whompus, Jan 9, 2006
    #7
  8. boong

    boong Member

    Joined:
    Dec 13, 2004
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    Hmm I have no idea what happened I'll try it again

    And yeah I have burnt a DVD with it before it is a DVD writable drive
     
    boong, Jan 9, 2006
    #8
  9. boong

    boong Member

    Joined:
    Dec 13, 2004
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    Ok same problem, but I noticed when I was watching the Remaining Time section, it came down to 0 seconds, but there was still like 20% left, dunno if this really matters but yeah. Here's the new log, I think everything is gone.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM
    Nero version: 6.3.1.18 (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 6.3.1.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 6.3.1.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H552 D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 215MB (221140kB)
    Memory in use : 57 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.1.2006
    UDF/ISO compilation
    8:58:50 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation started

    8:58:50 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation completed (no file modified)

    8:58:50 PM #3 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    8:58:50 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
    DVD-Video files sorted

    8:58:50 PM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    8:58:50 PM #6 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H552B running

    8:58:50 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    8:58:50 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    8:58:50 PM #9 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    8:58:51 PM #10 Text 0 File DlgWaitCD.cpp, Line 246
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 969199 (215:22.49, 1892MB)

    8:58:51 PM #11 Text 0 File DlgWaitCD.cpp, Line 258
    Write in overburning mode: NO (enabled: CD)

    8:58:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 2143
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    8:58:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 419
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:58:51 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 969200 (969200) = #969200/215:22.50
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 969200 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    8:58:51 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1984921600, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    969200 | lead-out | 1 | 0x00 | 0x41

    8:58:51 PM #16 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    8:58:51 PM #17 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    8:58:51 PM #18 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    8:58:51 PM #19 Phase 32 File dlgbrnst.cpp, Line 1845
    Simulation started at 8x (11,080 KB/s)

    8:58:52 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:58:52 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 3:09,927 (189927ms) -> OK

    8:58:53 PM #22 Text 0 File DVDR.cpp, Line 1921
    Recording mode: Sequential Recording Mode

    8:58:53 PM #23 Text 0 File Mmc.cpp, Line 20453
    Set BUFE: Super Link -> ON

    8:58:53 PM #24 Text 0 File DVDR.cpp, Line 2062
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:58:53 PM #25 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:58:59 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
    20:58:59.937 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later

    9:02:34 PM #27 Text 0 File WriterStatus.cpp, Line 115
    <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 969200 (EC9F0h), lenght 0 blocks

    9:02:34 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    9:02:34 PM #29 Text 0 File DVDR.cpp, Line 2304
    EndDAO: Last written address was 969199

    9:02:46 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    9:02:46 PM #31 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    9:02:46 PM #32 Phase 33 File dlgbrnst.cpp, Line 1845
    Simulation completed successfully at 8x (11,080 KB/s)

    9:02:47 PM #33 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 8x (11,080 KB/s)

    9:02:47 PM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:02:47 PM #35 CDR -1066 File ThreadedTransferInterface.cpp, Line 1586
    Invalid field in command

    9:02:47 PM #36 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1586
    Invalid track info

    9:02:47 PM #37 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    9:02:47 PM #38 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 6/01/2006 2:22:03 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 11:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    boong, Jan 10, 2006
    #9
  10. boong

    boong Member

    Joined:
    Dec 13, 2004
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    Can someone suggest a burning program other than Nero that I can test my burner out on just to make sure its only Nero with the problem, not my drive?
     
    boong, Jan 10, 2006
    #10
  11. killalot

    killalot Active member

    Joined:
    Nov 7, 2002
    Messages:
    995
    Likes Received:
    0
    Trophy Points:
    66
    Dvd Decrypter its free aswell ......Top Dog.....
     
    killalot, Jan 10, 2006
    #11
  12. boong

    boong Member

    Joined:
    Dec 13, 2004
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    thx killalot ^

    I tried burning with Nero again, the simulation says its failed at 100%, so I was thinking the final processes at 100% is what it is failing. Does anyone know what its final processes at the end of the burn is? If someone can list them all including like 'stopping laser' or whatever then i can start to cancel out on a smaller list of possibilities and maybe solve the issue? If for nothing else just for interest and just broadening knowledge on this program I guess lol.

    As well as this, although the simulation didn't work, I tried just simply burning to a disc without a simulation prior to the burn, and it worked. It got to 100% and said it successfully burnt, like it did last time I burnt to disc. The difference this time was that I didn't get any frame skipping, and I don't know off hand anything different I did this time, but I know that InCD isn't present in the burning process anymore, because I removed it. So I guess the major problem solved, probably luck of the draw. But if anyone wants to investigate the simulation issue for future issues, I'd be glad to work on fixing it :).

    Thanks guys
     
    boong, Jan 11, 2006
    #12

Share This Page