I was burning a data disc and all of a sudden it fails and i get this report Windows 98 4.10 IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/04 4:51:12 PM Nero version: 6.6.0.1 (Nero Express) Recorder: <ATAPI CD-RW 52X24> Version: K.UC - HA 0 TA 0 - 6.6.0.1 Adapter driver: <ESDI_506> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD-ROM DDU1211 >Version: IYH1 - HA 0 TA 1 - 6.6.0.1 Adapter driver: <ESDI_506> HA 0 ATAPI CD-RW 52X24 (Target 0, D: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ? SONY DVD-ROM DDU1211 (Target 1, E: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ? SCSIVAX DVD/CD-ROM (Target 0, F: Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 24117248 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 127MB (130588kB) Free physical memory: 0MB (340kB) Memory in use : 100 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.1.2006 CD-ROM (ISO) 1:34:17 AM #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 1:34:17 AM #2 Text 0 File Burncd.cpp, Line 2832 ATAPI CD-RW 52X24 Seamless Link activated 1:34:17 AM #3 Text 0 File Reader.cpp, Line 127 Reader running 1:34:17 AM #4 Text 0 File Writer.cpp, Line 122 Writer ATAPI CD-RW 52X24 running 1:34:17 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 1:34:18 AM #6 Text 0 File Burncd.cpp, Line 3117 Turn on Track-at-once, using CD-R/RW media 1:34:18 AM #7 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 92126 ( 20:30.26) 1:34:18 AM #8 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 1:34:18 AM #9 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: ATAPI CD-RW 52X24; CDRW code: 00 97 27 29; OSJ entry from: Princo Corporation ATIP Data: Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 1:34:18 AM #10 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:34:18 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 92127 (92127) = #92127/20:28.27 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 92125 blocks [ATAPI CD-RW 52X24] -------------------------------------------------------------- 1:34:18 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [ATAPI CD-RW 52X24] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 188983296, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 92127 | lead-out | 1 | 0x00 | 0x41 1:34:18 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1096 Removed 2 run-out blocks from end of track 1. Length: 92127 -> 92125. 1:34:18 AM #14 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 1:34:18 AM #15 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 1:34:18 AM #16 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 1:34:18 AM #17 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 12x (1,800 KB/s) 1:34:18 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:34:18 AM #19 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Seamless Link -> ON , Auto Pilot : ON 1:34:47 AM #20 SCSI -1135 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02C80000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 1:34:47 AM #21 CDR -1135 File Writer.cpp, Line 311 Write error 1:34:47 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:34:49 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 1:34:49 AM #24 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state ATAPI CD-RW 52X24\H0 T0 1:34:49 AM #25 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 1:34:49 AM #26 Text 0 File Mmc.cpp, Line 15477 <ATAPI CD-RW 52X24 > start Close Session 1:34:52 AM #27 SCSI -1135 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 1:34:52 AM #28 CDR -1135 File WriterStatus.cpp, Line 249 Write error 1:34:52 AM #29 TRANSFER -19 File WriterStatus.cpp, Line 249 Could not perform Fixation 1:34:52 AM #30 Text 0 File WriterStatus.cpp, Line 258 falling back to disc fixation 1:34:52 AM #31 Text 0 File Mmc.cpp, Line 15477 <ATAPI CD-RW 52X24 > start Close Session 1:34:53 AM #32 SCSI -1135 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 1:34:53 AM #33 CDR -1135 File WriterStatus.cpp, Line 249 Write error 1:34:53 AM #34 TRANSFER -19 File WriterStatus.cpp, Line 249 Could not perform Fixation 1:34:53 AM #35 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 1:34:53 AM #36 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 12x (1,800 KB/s) Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 10/27/05 4:17:38 PM File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 10/27/05 4:17:38 PM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 10/27/05 4:17:38 PM File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM Registry Keys:
You need to edit out your serial number, you don't want anyone else to borrow it. You have no juice here, can you free some memory up.
Wow, ive never seen it down to zero. Also 127MB is not enough memory. You should get it up to at least 512MB and then you could rip anything data or movie. Nero needs updating to 6.6.0.18 http://www.nero.com/nero6/enu/nero-up.php something strange going on there. You have DMAs off on a couple of drives. How to fix it: http://forums.afterdawn.com/thread_view.cfm/260038 You have Roxio and Nero installed and one of them has to go. I suggest you toss Roxio and keep nero, but that is up to you. To get rid of Roxio, you will need to us a zapper, as un-install doesn't get rid of all of it. http://www.microadvantage.net/downloads/zapper60.zip It also doesn't like the media you are using. I know its just a CD, but try using Verbatims.
