1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help with burning bin/cue- log included

Discussion in 'Nero discussion' started by akjldkl, Jan 16, 2006.

  1. akjldkl

    akjldkl Member

    Joined:
    Jan 16, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    i am trying to burn a bin/cue onto a cd-r. i have followed the instructions. i have nero 6.6.0.15. when i burn it takes about ten minutes but it only burns 600kb of data (the bin is about 700mb). i am burning it at 8kb/s and i have tried it at burn disk at once and burn disk at one/96. i have tried it 3 times. i forgot to copy the log. i will waste another cd if nobody has any quick suggestions.
     
    akjldkl, Jan 16, 2006
    #1
  2. rmfinley

    rmfinley Member

    Joined:
    Jan 15, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    check your overburn settings under options, expert settings. I don't burn many cd's, but i just burned doom,2 cd's,both bin files just over 800MB
     
    rmfinley, Jan 16, 2006
    #2
  3. akjldkl

    akjldkl Member

    Joined:
    Jan 16, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    it was at 82 min on an 80 min cd
     
    akjldkl, Jan 16, 2006
    #3
  4. akjldkl

    akjldkl Member

    Joined:
    Jan 16, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    please someone respond. i am really frustrated now. it says burn complete but it wont play.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.15
    Internal Version: 6, 6, 0, 15e

    Recorder: <_NEC NR-7700A> Version: 1.23 - HA 1 TA 1 - 6.6.0.15
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <MATSHITA DVD-ROM SR-8587 >Version: 5G26 - HA 1 TA 0 - 6.6.0.15
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST320410A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : MATSHITA DVD-ROM SR-8587 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC NR-7700A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    MATSHITA DVD-ROM SR-8587 D: CDRom0
    _NEC NR-7700A E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 24117248 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 127MB (130352kB)
    Free physical memory: 35MB (36336kB)
    Memory in use : 72 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    16.1.2006
    CueSheet
    11:15:40 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    11:15:40 PM #2 Text 0 File Writer.cpp, Line 122
    Writer _NEC NR-7700A running

    11:15:40 PM #3 Text 0 File Burncd.cpp, Line 3231
    Turn on UltraRaw 96-Mode, using CD-R/RW media

    11:15:40 PM #4 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 359845 ( 79:59.70)
    Last address to be written: 354053 ( 78:42.53)

    11:15:40 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD DVD)

    11:15:40 PM #6 Text 0 File DlgWaitCD.cpp, Line 2457
    Recorder: _NEC NR-7700A;
    CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
    ATIP Data:
    Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    11:15:40 PM #7 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:15:40 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    2 indices, index0 (150) provided
    original disc pos #0 + 300 (300) = #300/0:4.0
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 300 blocks [_NEC NR-7700A]
    1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    2 indices, index0 (150) provided
    original disc pos #0 + 353604 (353604) = #353604/78:34.54
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 353604 blocks [_NEC NR-7700A]
    --------------------------------------------------------------

    11:15:40 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [_NEC NR-7700A] for write in raw writing
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x20; Session Closed, disc fixated
    Tracks 1 to 2:
    1: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 0 367200 1101600, ISRC ""
    2: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 1101600 1468800 867091392, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    300 | 2 | 0 | 0x41 | 0x00
    450 | 2 | 1 | 0x41 | 0x00
    354054 | lead-out | 1 | 0x41 | 0x00

    11:15:41 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    11:15:42 PM #11 Text 0 File Burncd.cpp, Line 4116
    Cache writing successful.

    11:15:42 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    11:15:42 PM #13 Phase 28 File dlgbrnst.cpp, Line 1832
    Speed measurement started

    11:15:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:15:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450

    11:18:11 PM #16 Text 0 File WriterStatus.cpp, Line 116
    <_NEC NR-7700A > start writing Lead-Out at LBA 354054 (56706h), lenght 6750 blocks

    11:18:12 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:18:12 PM #18 Phase 29 File dlgbrnst.cpp, Line 1781
    Speed measurement completed: 33.9x (5,088 KB/s)

    11:18:12 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (1,200 KB/s)

    11:18:12 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:18:12 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450

    11:18:12 PM #22 Text 0 File Mmc.cpp, Line 16847
    StartDAO : CD-Text - Off

    11:18:12 PM #23 Text 0 File Mmc.cpp, Line 21627
    Set BUFE: JustLink -> OFF

    11:18:16 PM #24 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:18:16 PM #25 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:18:16 PM #26 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:18:16 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:18:16 PM #28 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:18:16 PM #29 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:18:16 PM #30 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:18:16 PM #31 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:18:16 PM #32 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:18:16 PM #33 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x038B5000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:28:24 PM #34 Text 0 File WriterStatus.cpp, Line 116
    <_NEC NR-7700A > start writing Lead-Out at LBA 354054 (56706h), lenght 6750 blocks

    11:28:36 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:28:37 PM #36 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 8x (1,200 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:00:00 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    akjldkl, Jan 16, 2006
    #4
  5. akjldkl

    akjldkl Member

    Joined:
    Jan 16, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    bump
    please
     
    akjldkl, Jan 17, 2006
    #5
  6. akjldkl

    akjldkl Member

    Joined:
    Jan 16, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    bump
     
    akjldkl, Jan 22, 2006
    #6
  7. webng

    webng Member

    Joined:
    Jan 18, 2006
    Messages:
    27
    Likes Received:
    0
    Trophy Points:
    11
    I'm no guru by any meansbut 128MB ram? I think the minimum is 256MB isn't it?
     
    webng, Jan 22, 2006
    #7
  8. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    Your Nero prog is way behind, update to 6.6.0.18 as previously advised memory is way too low, shut any unnecessary progs.
    Try slowing your burn speed to 4X.
     
    gwendolin, Jan 22, 2006
    #8

Share This Page