|
Post your Nero cd/dvd speed quality scans here(2)
|
|
Senior Member
|
22. April 2008 @ 23:12 |
Link to this message
|
Russ no confusion intended. lol.
Give this link a look see for your Ridatas.... ;)
hth more than it hurts... :P
....gm
|
AfterDawn Addict
|
23. April 2008 @ 01:06 |
Link to this message
|
|
Russ try using supermediastore.com sometime they have Ritek and are never out of stock. Have you ever ordered Taiyo Yudens? there the best you can get
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS RAMPAGE FORMULA 775 Intel X48 Mobo/Seagate Barracuda 250GB 32MB Cache Sata HDD(primary)/Seagate Barracude 160GB Sata(slave)/NVIDIA GeForce 7950 GX2,1 GB of GDDR3 Memory /CORSAIR Dominator PC8500/1066 (2x2GB) DDR2/Intel Core 2 Quad Q9450 2.66GHz 12MB L2 Cache,OC(ed)to ? on air/ Zalman 9700/3-Plextor PX-810SA Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time
|
AfterDawn Addict
|
23. April 2008 @ 01:43 |
Link to this message
|
ZoSoIV,
Quote: Russ try using supermediastore.com sometime they have Ritek and are never out of stock. Have you ever ordered Taiyo Yudens? there the best you can get
I know, I've used them ( Sony 8x) but they are so expensive! It's just that I had an order for Newegg for my parts and wanted to get everything in one shot. Got it covered thanks to a friend! I've had very good success with the RiDatas until this last batch. Still, my failure rate is less than 1%! And that's out of 700 disks! Not too bad!
I wound up with a 64x2 4800+ for the eMachine. The 45 watt chips were out of stock and I didn't want to wait and wind up paying more for shipping! My G.Skill 800MHz memory is going in the AMD and the 1066 G.Skill I ordered is mine! LOL!! All Mine!!!!! ROFL!! I also ordered that Enzotech NB cooler from Sidewinder. Sidewinder is a PITA to deal with! It took 4 complete do-overs on the order form to finally get it ordered. It wouldn't accept my zip code or the state! Said that there was no such state as Ca! That wouldn't be so bad except it wipes the whole thing clean, every time and you have to start all over again! ARGH!!! Oh well, at least it's all a done deal!
Best Regards,
Russ
GigaByte GA-P35-DS3R V. 2.0 MB w/E6750 OCd to 3.50GHz - Arctic Freezer 7 Pro CPU Cooler - 2 GB Corsair Dominator DDR2/8500 at 5-5-5-15 @1066 MHz - Thermaltake W0093-RU TR-2 500 watt P/S - Seagate "Barracuda" 160GB SATA 3.0 7200 rpm hard drive - Asus 16x DVD-Rom - NEC 16x DVD-RW - XFX 7600GT PCIe x16 w/256 DDR3 @653/1600MHz - Sceptre X20 Naga III 20.1" Digital LCD "Widescreen" - Sony 425 Watt Digital Audio Control Center 5.1 PL-II Suround - And a little "Alien Expertise"!
"With Your Arms around the Future and Your Back up against The Past" The Moody Blues
|
Senior Member
|
14. May 2008 @ 19:49 |
Link to this message
|
Hey all, long time no postie,
Just had to share, heres a Singapore Verbatime Printable DL burned @ 4x via a Samsung 203b, scanned @ 4x via a Lite-On 20a1h:
Linky
Ya gotta love those old-time verbs!
|
Senior Member
|
14. May 2008 @ 19:50 |
Link to this message
|
|
Oopsie Doopsie, a double postie!
This message has been edited since posting. Last time this message was edited on 14. May 2008 @ 19:51
|
Senior Member
|
14. May 2008 @ 19:54 |
Link to this message
|
|
it happens LOL
|
AfterDawn Addict
3 product reviews
|
14. May 2008 @ 21:24 |
Link to this message
|
Hobbit
good to see ya posting again.
i got a question for ya. whats the difference in the LH-20A1 H
i have the LH-20A1S(sata) and the A1P( ide) i know the A1L is lightscribe but whats the A1H???
|
Senior Member
|
14. May 2008 @ 21:48 |
Link to this message
|
Originally posted by cincyrob: Hobbit
good to see ya posting again.
i got a question for ya. whats the difference in the LH-20A1H
i have the LH-20A1S(sata) and the A1P(ide) i know the A1L is lightscribe but whats the A1H???
IDE lightscribe! :)
you knew that rob........
...gm
|
AfterDawn Addict
3 product reviews
|
14. May 2008 @ 22:02 |
Link to this message
|
|
heres my sign....lol
drew a total blank there
think im gonna get that LH-20A1L free shipping means alot.
|
Senior Member
|
14. May 2008 @ 22:08 |
Link to this message
|
Quote: i got a question for ya. whats the difference in the LH-20A1H
i have the LH-20A1S(sata) and the A1P(ide) i know the A1L is lightscribe but whats the A1H???
I have the A1H Rob, it is the IDE version of your SATA drive, I have one, it roots for the Red Sox. ( A 1 Hero)
versus the A1S (A 1 Soreloser) the Reds. Comprende?
|
Senior Member
|
14. May 2008 @ 22:40 |
Link to this message
|
|
AfterDawn Addict
3 product reviews
|
15. May 2008 @ 08:09 |
Link to this message
|
Originally posted by blivetNC: Quote: i got a question for ya. whats the difference in the LH-20A1H
i have the LH-20A1S(sata) and the A1P(ide) i know the A1L is lightscribe but whats the A1H???
I have the A1H Rob, it is the IDE version of your SATA drive, I have one, it roots for the Red Sox. ( A 1 Hopeless)
versus the A1S (A 1 SeriesWinners) the Reds. Comprende?
very nice way of putting that BlivetNC nice to see you finding your ways...lmao
anyone got any tips on cleaning a disc that is scratched up? ive tried toothpaste. gel soap. i cant get this thing to RIP. ive tried RIPIT4ME, clonedvd, dvdshrink, dvdfab plus. havent tried the ripper with anydvd yet
This message has been edited since posting. Last time this message was edited on 15. May 2008 @ 08:11
|
Senior Member
|
15. May 2008 @ 08:29 |
Link to this message
|
|
rob have you tried taking it to Block Buster or somewhere like that and letting them run the "de-scratcher" on it. lol. Don't know what else to call it.... lol.
Good luck with that.... ;)
....gm
|
Senior Member
|
15. May 2008 @ 08:37 |
Link to this message
|
|
For scratched discs I picked up a Memorex OptiFix Pro and I don't care what other people say, it does work. I've resurfaced a dozen scratched discs to the point where I can rip them. One got scratched by being improperly in a vertical drive. You could see where the spindle miss-grabbed the disc. I was able to smooth away the scratches and rip (save) the disc. You can actually feel the difference, the survace is smoother. I do put a weight on the lid, otherwise it would take forever on some discs, and even then I run the cycle several times.
|
Senior Member
|
15. May 2008 @ 09:34 |
Link to this message
|
|
BTW Rob,
What movie/disc is it?
|
AfterDawn Addict
3 product reviews
|
15. May 2008 @ 11:15 |
Link to this message
|
|
x-men evolution season 3 disc 1
|
AfterDawn Addict
3 product reviews
|
17. May 2008 @ 20:42 |
Link to this message
|
i got some dvd-rw verbs. gonna have a scan or 2 to post shortly
ok here 1 is.. not to good but it is a RW disc..lol
This message has been edited since posting. Last time this message was edited on 17. May 2008 @ 20:57
|
Senior Member
|
17. May 2008 @ 20:57 |
Link to this message
|
Originally posted by cincyrob: i got some dvd-rw verbs. gonna have a scan or 2 to post shortly
You silly twit!! Buy some DVD-R's.. :) I've got a few but the only "friend" I know that uses them is Zo!! Course he doesn't know CRAP!!! :D
Got some MCC 02RG20, MCC 03RG20, RITEKF1, TYG01, TYG02, TYG03, and some TDK cheapies!!! (don't tell Creaky tho....hehehe) Wanna see a scan or two on one of those?? :P (Be careful requesting TYG01... ONLY GREAT movies go on those!!!!) btw has there been a GREAT movie released this year?? Trying to remember........hmmmmmmmmmmmm
...gm
|
AfterDawn Addict
3 product reviews
|
17. May 2008 @ 21:00 |
Link to this message
|
im thinking when i get the new pioneer i will get a hundred 8x-r TY's
and your so right there hasnt been anything worth burning lately. i cant remember the last movie i watched that i thought man that was good i will watch it again....
just looked at SMS. only a buck difference in the value line and premium line for 200 disc 54 vs 53....yea premium it is..lol
This message has been edited since posting. Last time this message was edited on 17. May 2008 @ 21:04
|
AfterDawn Addict
|
17. May 2008 @ 23:41 |
Link to this message
|
Bet ya my Taiyo Yuden DVD dash Rs hold as long as your guys DVD plus R format!!lol. DVD plus R are overrated
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS RAMPAGE FORMULA 775 Intel X48 Mobo/Seagate Barracuda 250GB 32MB Cache Sata HDD(primary)/Seagate Barracude 160GB Sata(slave)/NVIDIA GeForce 7950 GX2,1 GB of GDDR3 Memory /CORSAIR Dominator PC8500/1066 (2x2GB) DDR2/Intel Core 2 Quad Q9450 2.66GHz 12MB L2 Cache,OC(ed)to ? on air/ Zalman 9700/3-Plextor PX-810SA Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time
|
Senior Member
|
18. May 2008 @ 00:00 |
Link to this message
|
Originally posted by ZoSoIV: Bet ya my Taiyo Yuden DVD dash Rs hold as long as your guys DVD plus R format!!lol. DVD plus R are overrated
You trying to start something Mr.???? :P
Over-rated is such a strong term.... They work well and bit-set but I've had ZERO problems using DVD-R.... I think it's my parents stand alone DVD player that "dislikes" the DVD+R discs, so they get the DVD-R discs when backing up movies. ;)
I do believe the Good Doctor had an issue like that as well. :)
...gm
|
AfterDawn Addict
|
18. May 2008 @ 00:11 |
Link to this message
|
lol nah
the DVD dash R TYs have worked for me in 100s of different dvd players though
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS RAMPAGE FORMULA 775 Intel X48 Mobo/Seagate Barracuda 250GB 32MB Cache Sata HDD(primary)/Seagate Barracude 160GB Sata(slave)/NVIDIA GeForce 7950 GX2,1 GB of GDDR3 Memory /CORSAIR Dominator PC8500/1066 (2x2GB) DDR2/Intel Core 2 Quad Q9450 2.66GHz 12MB L2 Cache,OC(ed)to ? on air/ Zalman 9700/3-Plextor PX-810SA Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time
|
Senior Member
|
18. May 2008 @ 00:49 |
Link to this message
|
|
AfterDawn Addict
|
18. May 2008 @ 02:57 |
Link to this message
|
no problem lol
I just think people get to hung up on the DVD dash R vs the DVD plus R ,I think alot of people think just because they say plus they have to be better. whats way more important it that you use a quality brand like Taiyo Yuden or Verbatim and use good burning practices, speed,software and process other factors ,using quality drives/burners, burning on a clean machine and not interfering while your in the burning process
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS RAMPAGE FORMULA 775 Intel X48 Mobo/Seagate Barracuda 250GB 32MB Cache Sata HDD(primary)/Seagate Barracude 160GB Sata(slave)/NVIDIA GeForce 7950 GX2,1 GB of GDDR3 Memory /CORSAIR Dominator PC8500/1066 (2x2GB) DDR2/Intel Core 2 Quad Q9450 2.66GHz 12MB L2 Cache,OC(ed)to ? on air/ Zalman 9700/3-Plextor PX-810SA Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time
|
|
Advertisement
|
  |
|
Moderator
1 product review
|
18. May 2008 @ 10:29 |
Link to this message
|
|
Well it is a minus not a dash :) meaning lesser :O
|