Hi, when cloning a bought DVD I'm having a bit of trouble, most of the time they work great but for some reason the odd one is full of hang ups and jumps. I am decrypting using DVD shrink with DVD43 in the background, then burning usin nero 6, i have also tried decrypting via dvd decryter. For some reason the odd movie fails the first time i try to burn it aswell then the second copy is full of hang ups. Is there any solution. my last problem DVD was hitch it copied fine according to the PC but played back awful to the point I had to turn it off. Cheers for any help: I am using a AMD sempron 2600 with 512mb ram, windows SP1. Samsung DVD+/-RW with ritek G05 disks.
My suggestion would be to make sure your drive's firmware is up to date and that your not burning at max speed. I might also run a lens cleaning disc in the dvd player. Post your last nero log to see if something else is amiss. Be sure to edit out your serial #. It can be found in crogram files>ahead>nero>nero history.log.
Heres My Log of one that has just failed Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2/13/2004 10:41:26 AM Nero version: 6.3.0.3 (Nero Express) Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 0 TA 0 - 6.3.0.3 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <TSSTcorp CD/DVDW TS-H552B>Version: TS04 - HA 0 TA 0 - 6.3.0.3 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 284MB (291724kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.2.2006 UDF/ISO compilation 3:42:31 PM #1 Phase 112 File dlgbrnst.cpp, Line 1800 DVD-Video files reallocation started 3:42:32 PM #2 Phase 114 File dlgbrnst.cpp, Line 1800 DVD-Video files reallocation completed (no file modified) 3:42:32 PM #3 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 3:42:32 PM #4 Phase 111 File dlgbrnst.cpp, Line 1800 DVD-Video files sorted 3:42:32 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 3:42:32 PM #6 Text 0 File Writer.cpp, Line 124 Writer TSSTcorp CD/DVDW TS-H552B running 3:42:32 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 3:42:32 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 3:42:32 PM #9 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 3:42:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286111 (508:01.36, 4465MB) 3:42:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 3:42:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 3:42:32 PM #13 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:42:32 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW TS-H552B] -------------------------------------------------------------- 3:42:32 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286112 | lead-out | 1 | 0x00 | 0x41 3:42:32 PM #16 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 3:42:32 PM #17 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 3:42:32 PM #18 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 3:42:32 PM #19 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 2x (2,760 KB/s) 3:42:32 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:42:32 PM #21 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 14:10,273 (850273ms) -> OK 3:42:32 PM #22 Text 0 File DVDR.cpp, Line 1512 Recording mode: Sequential Recording Mode 3:42:32 PM #23 Text 0 File Mmc.cpp, Line 19516 Set BUFE: supported -> ON 3:42:32 PM #24 Text 0 File DVDR.cpp, Line 1643 Start write address at LBA 0 DVD high compatibility mode: Yes 3:42:32 PM #25 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:42:40 PM #26 Text 0 File Cdrdrv.cpp, Line 1277 15:42:40.500 - TSSTcorp CD/DVDW TS-H552B\H0 T0 : Queue again later 3:58:19 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x048B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x12 0x58 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 3:58:19 PM #28 CDR -1135 File Writer.cpp, Line 301 Write error 3:58:19 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 3:58:19 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 3:58:19 PM #31 Text 0 File DVDR.cpp, Line 1847 EndDAO: Last written address was 1202367 3:58:19 PM #32 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 3:58:19 PM #33 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 3:58:19 PM #34 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 2x (2,760 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 8:27:50 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@kwakker5 You need to update Nero - the latest version of 6 is 6.6.0.18 - your a little behind Your fimrware is a little behind also - so that's needs to be updated too! Here's a link: http://forum.rpc1.org/dl_firmware.php?download_id=1911 Try those 2 things and try again. Let's us know how it turns out! I'm not a big fan of Ritek but all drives and setups are a little different on what they prefer so they may work well for you with these 2 updates. edit: spelling
