OK this might seem like a really dumb question but here it goes anyways. This is the first time I attempted to burn a DVD. So I took all the advie found walk throughs to help me out I used the comcast site. Did everything it said i put it through DivXtoDVD, DVDShrink, And then DVD Decripter. When i put it in my DVD player nothing happened Just said loading.Is there something im missing? The DVD I used was a Sony DVD-RW 4.7. And I Burnt it at 2x. Also when i burnt the ISO image it was called LOW_FICO_CD1_AVI__LOW_FICO_CD2.ISO. Thats all i can tell u i think. I dont know much, all the adves would be appreciated. Thanks
Was it a stand alone set top DVD player for TV viewing? These4 do not play DVD RWs unless booktyped to DVD-ROM. Does the disk play in the computer using the drive that burned it? Can you see the files in Windows explorer?
No i just put it in the drive and it doesn't play in that also. I looked and you can not see the files either. So i must have went wrong somewhere. My DVD player is a Electrohome model HTB903E.
Yep. I would consult the guides for the type project you wabt to do and try again. Sounds like the data files never got on the disk.
Yea I tryed to burn it agian but there is still nothing showing up on my DVD. I have no clue whats going on im following everthing step by step.
Nope its not set up to do a test. But there is still nothing on my DvD when i burn it. Im really confused. I tryed Nero this time and it did the samething. Is there a anything else I can try or is it just my burner.
Awww i just took a look i wasnt sure all i got out of it was NU DVD RW DDW. Dont know if that helps though.
I just seen this on the burner itself. It has DVD+Rewritable does this mean it only can use DVD+RW discs,im using DVD-RW.
@ matlock... if you have dvd decrypter, then open it up, at the top, select tools, then the drop down, select drive, then select capabilities.. not only will it tell you what media the burner supports, but it will aslo tell you what the make and model is... then send us that info, (the burner info) that is..
Ok Heres what it says: [1:0:0] NU DVDRW DDW-082 B373 (D ATA It can read and write everything but DVD-RAM, DVD R DL, DVD+R DL
I read an article about my burner and everything should be turning out fine but still nothing is showing up on my DVD's when nero says its completed. So is it the movie itself. http://www.cdfreaks.com/article/138
Hi. Your burner's firmware is way out of date. The new version is B377, you can get it here: http://www.nu-global.com/admin/download/file/NU-DDW-082-B377.zip
Also, make sure you take your time when you follow those guides . You obviously missed a step somewhere. What you're trying to do is pretty advanced for someone that never burned before. May i just add that IMHO Nero is probably the easiest app to burn AVI's onto DVD's, not only that you also get a burn log out of it, which in this case would help us a lot out here.
OK I just updated everything I am going to go through the steps all over agian using nero. Once I am finished I will let you know what happens. Thank alot
great, and if it happens to fail and dishes out an error log, copy and paste it back here so we can figure it out...
Oh, and before you post it, remember to edit out your serial... It should start with 1A*****... Almost forgot that tiny detail...
Well here is what i got its alot of stuff. Hope this helps. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 20/02/2001 6:02:40 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM Nero Version: 6.6.0.13 Internal Version: 6, 6, 0, 13c (Nero Express) Recorder: <NU DVDRW DDW-082> Version: B377 - HA 1 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <AD3651S CZO084T >Version: 1.0 - HA 2 TA 0 - 6.6.0.13 Adapter driver: <dtscsi> HA 2 === Scsi-Device-Map === DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 0 DMA: On CdRomPeripheral : NU DVDRW DDW-082 atapi Port 1 ID 0 DMA: On CdRomPeripheral : AD3651S CZO084T 1.0 dtscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === NU DVDRW DDW-082 D: CDRom0 AD3651S CZO084T E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523756kB) Free physical memory: 181MB (185936kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.1.2006 UDF/ISO compilation 8:30:24 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 8:30:24 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 8:30:24 PM #3 Text 0 File Isodoc.cpp, Line 6194 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 8:30:24 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 8:30:24 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 8:30:24 PM #6 Text 0 File Writer.cpp, Line 122 Writer NU DVDRW DDW-082 running 8:30:24 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 8:30:24 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 8:30:24 PM #9 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 8:30:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1322831 (293:57.56, 2583MB) 8:30:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 8:30:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: NU DVDRW DDW-082, Media type: DVD-RW Disc Manufacturer: RITEKW - 01 Disc Application Code: 64, Disc Physical Code: 214 8:30:24 PM #13 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:30:24 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1322832 (1322832) = #1322832/293:57.57 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1322832 blocks [NU DVDRW DDW-082] -------------------------------------------------------------- 8:30:24 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [NU DVDRW DDW-082] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2709159936, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1322832 | lead-out | 1 | 0x41 | 0x00 8:30:24 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:30:24 PM #17 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 8:30:24 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:30:24 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 8:30:24 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:30:24 PM #21 Text 0 File DVDR.cpp, Line 2267 Recording mode: Sequential Recording Mode 8:30:24 PM #22 Text 0 File Mmc.cpp, Line 21469 Set BUFE: Seamless Link -> ON 8:30:24 PM #23 Text 0 File DVDR.cpp, Line 2421 Start write address at LBA 0 DVD high compatibility mode: Yes 8:30:24 PM #24 Text 0 File Cdrdrv.cpp, Line 8438 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:47:18 PM #25 Text 0 File WriterStatus.cpp, Line 116 <NU DVDRW DDW-082 > start writing Lead-Out at LBA 1322832 (142F50h), lenght 0 blocks 8:47:18 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:47:18 PM #27 Text 0 File DVDR.cpp, Line 2658 EndDAO: Last written address was 1322831 8:47:18 PM #28 Phase 181 File dlgbrnst.cpp, Line 1832 Writing lead-out... 8:47:42 PM #29 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 2x (2,770 KB/s) 8:47:42 PM #30 Phase 78 File dlgbrnst.cpp, Line 1832 Data verification started 8:47:47 PM #31 SCSI -1064 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B580600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x21 0x00 8:51:47 PM #198 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:51:47 PM #199 SectorVerify 20 File Cdrdrv.cpp, Line 9470 Read errors from sector 0 to 1322831 8:51:47 PM #200 Phase 81 File dlgbrnst.cpp, Line 1832 Data verification failed Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 29/08/2002 8:00:00 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 1:59:42 AM (Adapter driver for rec) File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 16/12/2005 5:57:11 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
