Lately, Everytime i try to burn a DVD it gives me this error "Could Not Perform End of Disk at Once" I usually get this error immediately in the beginning or at the end around 94% Does anyone else get this error? Or know what i can do to fix it? Ill give you my example today. I backup Wedding Crashers with DVD Shrink and had ANYDVD running in the back. It backup 100% and when it finished it ask to insert a blank disc. So i put in a 4X disc to burn and about 1 minute later it gave me the error. I saved the error log that poped up after here it is: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 3:24:34 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero API version: 6.6.0.15 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 15h Recorder: < 16X8 DVD DUAL> Version: A04b - HA 0 TA 1 - 6.6.0.15 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : ST3120023A atapi Port 0 ID 0 DMA: On CdRomPeripheral : 16X8 DVD DUAL atapi Port 0 ID 1 DMA: On CdRomPeripheral : SONY CD-RW CRX210E1 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === 16X8 DVD DUAL F: CDRom0 SONY CD-RW CRX210E1 G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 87MB (89260kB) Memory in use : 82 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.1.2006 NeroAPI 12:00:25 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 12:00:25 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 12:00:25 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 12:00:25 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 12:00:25 PM #5 Text 0 File Writer.cpp, Line 122 Writer 16X8 DVD DUAL running 12:00:25 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:00:25 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:00:26 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:00:26 PM #9 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 12:04:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286159 (508:02.09, 4465MB) 12:04:05 PM #11 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO 12:04:05 PM #12 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: 16X8 DVD DUAL, Media type: DVD-R Disc Manufacturer: PRINCO - Disc Application Code: 64, Disc Physical Code: 193 12:04:05 PM #13 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 12:04:05 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [16X8 DVD DUAL] -------------------------------------------------------------- 12:04:05 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [16X8 DVD DUAL] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286160 | lead-out | 1 | 0x41 | 0x00 12:04:06 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 12:04:06 PM #17 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 12:04:06 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 12:04:06 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 12:04:06 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:04:06 PM #21 Text 0 File DVDR.cpp, Line 2357 Recording mode: Sequential Recording Mode 12:04:06 PM #22 Text 0 File Mmc.cpp, Line 21663 Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON 12:04:06 PM #23 Text 0 File DVDR.cpp, Line 2511 Start write address at LBA 0 DVD high compatibility mode: Yes 12:04:06 PM #24 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:04:42 PM #25 SCSI -1152 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x00BC0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x64 Sense Qual: 0xC0 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x64 0xC0 12:04:42 PM #26 CDR -1152 File Writer.cpp, Line 311 Disc speed error 12:04:42 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:04:42 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:04:42 PM #29 Text 0 File DVDR.cpp, Line 2749 EndDAO: Last written address was -1 12:04:54 PM #30 SCSI -1152 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04194A00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x64 Sense Qual: 0xC0 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x64 0xC0 12:04:54 PM #31 CDR -1152 File WriterStatus.cpp, Line 167 Disc speed error 12:04:54 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 12:04:54 PM #33 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 4x (5,540 KB/s) 12:04:54 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 12:04:54 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 3:24:34 AM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 8:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:09 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Well joeg112 I see one major problem!! Eck! That stuff is the pits. Nothing but problems! Switch to the good stuff like Taiyo Yuden or Verbatim. You've got another problem here too: You need to free up some ram. This is too low. No multi tasking and shut down any unnecessary processes. The latest version of 6 is 6.6.0.18 - can't hurt to up date to that. You can also reduce your target size to 4360.
Ok so your telling me that my blank dvd's are not good. I know this also but come on it was a good deal i thought. I went to compusa and they where 100pack for 20$ so i thought good deal right....Well im not to familiar with brand names so your saying avoid princo at all cost and look for Taiyo Yuden or Verbatim. I have a 50 pack of Sony 4.7 48max speed also but there my dads disc. What about these brands are they good or no? (Fuji, Memorex, Dynex, Sony) I heard of Verbatim before but never heard of Taiyo Yuden. Whats the best quality kind? Also i should close some programs under task manager? I will do this also. Should i delete some things on C drive or does that have nothing to do with it? Usualy when i rip to PC i save on my D drive then i burn it to a disc (if it works) I tried to update to Nero 7 ultra edition but it told me to uninstall all previous versions and that the one i downloaded was a demo? Can i upgrade to Nero 7? I bought Nero along time ago and usualy when i update it automatically inserts my serial #. If not where can i upgrade to the latest 6? How can i reduce my target size? With DVD shrink or with Nero or with both? And how?? Please help me binkie!! SAVE ME FROM THE DVD HORROR!!
I will try my best to save you from the horror First we need to get you on the right path by using better media/blanks. No to Memorex and Dynex - both use crappy manufacturers and are just as bad a Princo. Yes to Fuji & Sony if they are made in Japan. These are usually made by Taiyo Yuden. You can buy genuine Taiyo Yuden's from supermediastore.com. Try one of those Sony's your dad has. I think you mean 8x - 48x would be cd's. I would burn at 4x also for now. 82% of your memory is in use - that's alot. Shut down what you don't need in task manager. I would do a windows disc cleanup and a system defrag also. I could have this backwords but I think only Nero7 preminum works w/ shrink not 7 ultra. And yes if you want to upgrade to 7 you will have to pay again. I still use 6. I usually update Nero from major geeks.com. Nero site can be quite slow on downloads. Here's a link: http://www.majorgeeks.com/download.php?det=633 Your can reduce the target size in shrink by going to edit>preferences. In the preferences tab click on custom then type in 4360. This will keep from burning the the edge of the disc. You may also need a firmware update for your drive but the drive listed in the log seems generic. What's the make and model?
Ok i will attempt to burn with one of the Sony dvd -r at 4x. I updated to the latest Nero 6. I am doing disk cleanup & ill defrag after. My Dvd burner is Micro Advantage DVD+RW (Dvd & CD Re Writable Drive) DVD Double Layer 8.5 gig DVD Write Max 16x, DVD ReWrite Max 4x, Cd Write 48x max IDE Internal Model # - 16DDVDRW-A13 My current driver is 16X8 DVD Dual. Version 5.1.2535.0 Can not find the software disk it came with. I also saw on Micro ADvantage.net has been shutdown since 12/23/05 I think they went out of business. I will try to burn again in a little bit after defragment. Thanks for the help so far.
@joeg112 Post back on how it goes! The latest and only firmware posted for your drive on the firmware page is a060G. Here's a link: http://forum.rpc1.org/dl_firmware.php?download_id=1996 Let's see what happens with those sony's 1st.
WoohoooOO! IT worked perfectly with no problems except one... Now i have to go buy some good quality DVD-R disc. Well thanks 4 your help. I installed that firmware but when i checked it again it still said i had the old one installed. But when i rebooted my PC it said "Found New Hardware" but did not do anyhting after that. But oh well it worked great and thanks 4 the help binkie!
@joeg112 You're welcome! Glad we got it solved! Using good media can make all the difference. You can get genuine Taiyo Yuden from here + their having a good sale now: http://supermediastore.com.
