Recently, I was burning with version 3.2.4 and gave me an error. I upgraded to 3.2.5 and still receiving the same error. Before, I was able to burn, but for some reason, i can't anymore. The error are as follows:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b

Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AK5012F GGN658S 1.0 dtscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
AK5012F GGN658S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047960kB)
Free physical memory: 432MB (442744kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.2.2006
NeroAPI
11:44:25 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

11:44:25 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

11:44:25 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

11:44:25 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

11:44:25 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

11:44:25 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:44:25 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:44:25 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:44:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2266303 (503:37.28, 4426MB)

11:44:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

11:44:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

11:44:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:44:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2266304 (2266304) = #2266304/503:37.29
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2266304 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------

11:44:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4641390592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2266304 | lead-out | 1 | 0x41 | 0x00

11:44:28 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

11:44:28 PM #16 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

11:44:28 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

11:44:28 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)

11:44:28 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:44:29 PM #20 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

11:44:29 PM #21 Text 0 File Mmc.cpp, Line 21708
Set BUFE: JustLink -> ON

11:44:29 PM #22 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

11:44:29 PM #23 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:44:29 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x94 0xC0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

11:44:29 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1771
Illegal disc

11:44:29 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1771
Could not perform start of Disc-at-once

11:44:29 PM #27 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)

11:44:29 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

11:44:29 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 1:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Please help...thank you!

You should edit out your sn# from your post.

For some reason the burner is not selecting correct write sequence for the disks.

Quote:

---

Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

---

That is -r media

Quote:

---

11:44:29 PM #27 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)

---

That is for +r media.

I notice your burner has newest firmware. Are you sure you used the right firmware
when you flashed. The firmware you have in it is for dell oem. Is that what it is?

I do not think it is OEM...could that be the case? It was burning before with the previous firmware...then it stated to give me errors. I thought updating the firmware will do, but same error. Could it be Shrink or Nero?

I dont think it would be shrink. It could be Nero I guess. Your version is a few updates behind. I would update it to newest 6.6.1.4 first thing for testing before looking into firmware.

If your computer is a dell then this drive will be oem.

v0rtex123,

The current version of dvdshrink is 3.2.0.15, you can get it here if needed.
http://www.mrbass.org/dvdshrink/

The first thing you should do is what has already been mentioned, update you version of nero, the current version is 6.6.1.4. Here the link for the update, download and install packages 1 and 2 (without the yahoo tool bar.
http://ww2.nero.com/nero6/enu/nero-up.php

Here:
*************************************************
Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D
*************************************************

If you have a Dell OEM drive, the firmware is upto date @ Ver. 203D

Here:
**************************************************
11:44:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
***************************************************

You're using RITEK DVD-R disks which are not the best and have been known to be problematic. Try switching to another brand like Sony, Verbatim, or MITSU (make sure they're made in japan).

Here:
*****************************************************
11:44:28 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
*****************************************************

No need to burn this slow (2.4X), try bumping it up to 4x.

One other thing here:
******************************************************************
CdRomPeripheral : AK5012F GGN658S 1.0 dtscsi Port 2 ID 0 DMA: Off
******************************************************************

This cdrom drive is set for pio mode, turn on dma for this device. Here is a guide.

http://www.onthegosoft.com/dma_setting_nt.htm

Thanks for the help Johnl123, but unfortunately it still will not burn. I have upgraded my Nero 6 to a Nero 7 and changed media disc's to the Sony brand. I also updated my DVD Shrink and the error log are as follows:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AK5012F GGN658S 1.0 dtscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
AK5012F GGN658S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047960kB)
Free physical memory: 555MB (568368kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2006
NeroAPI
8:58:25 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started

8:58:25 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)

8:58:25 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

8:58:25 AM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

8:58:25 AM #5 Text 0 File Reader.cpp, Line 124
Reader running

8:58:25 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

8:58:25 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

8:58:25 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

8:58:25 AM #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

8:58:27 AM #10 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2266303 (503:37.28, 4426MB)

8:58:27 AM #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO

8:58:27 AM #12 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

8:58:27 AM #13 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:58:27 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2266304 (2266304) = #2266304/503:37.29
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2266304 blocks [D: _NEC DVD+-RW ND-6500A]
--------------------------------------------------------------

8:58:27 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: _NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4641390592, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2266304 | lead-out | 1 | 0x41 | 0x00

8:58:27 AM #16 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

8:58:27 AM #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

8:58:27 AM #18 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

8:58:27 AM #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

8:58:27 AM #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)

8:58:28 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:58:28 AM #22 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode

8:58:28 AM #23 Text 0 File MMC.cpp, Line 21541
Set BUFE: JustLink -> ON

8:58:28 AM #24 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

8:58:28 AM #25 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:58:28 AM #26 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 22 94 C0 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

8:58:28 AM #27 CDR -1046 File ThreadedTransferInterface.cpp, Line 1783
Illegal disc
D: _NEC DVD+-RW ND-6500A

8:58:28 AM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
Could not perform start of Disc-at-once

8:58:28 AM #29 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)

8:58:28 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

8:58:28 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 1:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I have no idea why this is happening...any help will be most appreciated! Thank you!

Two things to try:

1) Your version of nero 7 is not current, update it to ver 7.0.1.4b

get it here:
http://ww2.nero.com/nero7/enu/nero7-up.php

2) Here the log shows:

**************************************************************
8:58:27 AM #10 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2266303 (503:37.28, 4426MB)
***************************************************************

Shrink is producing a file size of 4489MB and the burning process is failing/stopping at 4426MB. Have shrink produce an output file size of 4300MB, this will keep the burning process from occuring too close to the outer edge of the disk, which your burner seems to be having a problem with.

To do this run shrink and goto: edit-->preferences
In the preferences tab choose "custom" from the dropdown menu and then enter a value of 4300.

I am still unable to burn...i have tried reinstalling the firmware and updating Nero. Still no avail! I am not sure what the problem is...even with gamexcopy...it is saying that it cannot write on disc...not compatible. Please help!

Did you change the output file size in shrink to 4300 before you tried again?

Also here the log shows:
********************************************************************
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
********************************************************************

If you are trying to booktype the disk, booktyping can only be applied to DVD+R media and it looks like you're using DVD-Rs. Either switch to DVD+Rs or disable/turn off booktyping in nero (change setting to automatic).

Quote:

---

8:58:28 AM #29 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)

---

Is there some reason you are burning at 2.4x, try it at 4x and see if this works. NEC's don't usually like this speed for single layer disks.

I changed it to 4300mb and still i get an error saying illegal disc. My firmware is already up to date which is 2.24. I don't get what is going on....ugh!

Can you post your most recent Nero log.
Did you make sure to set booktyping to automatic in Nero? Unless you plan on using DVD+Rs.

Here is my current Nero error log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.24 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 2.24 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047960kB)
Free physical memory: 515MB (528348kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.2.2006
Burn DVD Image
9:43:35 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

9:43:35 PM #2 Text 0 File Reader.cpp, Line 124
Reader running

9:43:35 PM #3 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

9:43:35 PM #4 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2133621 (474:08.21, 4167MB)

9:43:35 PM #5 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

9:43:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

9:43:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:43:35 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2133622 (2133622) = #2133622/474:8.22
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2133622 blocks [D: _NEC DVD+-RW ND-6500A]
--------------------------------------------------------------

9:43:35 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: _NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4369657856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2133622 | lead-out | 1 | 0x41 | 0x00

9:43:35 PM #10 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:43:35 PM #11 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

9:43:35 PM #12 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

9:43:35 PM #13 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

9:43:35 PM #14 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 2.4x (3,324 KB/s)

9:43:35 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:43:35 PM #16 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

9:43:35 PM #17 Text 0 File MMC.cpp, Line 21611
Set BUFE: JustLink -> ON

9:43:35 PM #18 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

9:43:35 PM #19 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:43:35 PM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 20 8E 80 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

9:43:35 PM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
D: _NEC DVD+-RW ND-6500A

9:43:35 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once

9:43:35 PM #23 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2.4x (3,324 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 1:03:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

The log looks ok, the firmware also appears to be ok now @Version: 2.24 (NEC's web site also reflects this), the only possible problem I see is you choice in media, you switched back to using RITEK.

here:
********************************************************************
9:43:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
*********************************************************************

RITEKF, in my opinion sucks and it could be that your burner doesn't like it either, try what I suggested above as far as media alternatives since the firmware is now different. Give sony, verbatims, or taiyo yuden another try and see what happens (try DVD+R media).

at what speed x8-x16 dvd+-r's r u useing. if firmware is not updated properly u cannot use x16 speed dvd's fall back to x8 or even x4. i also found out that useing othe original Nero 6.0 works the best updating it did not work for me neither

I was burning at 4x...I used DVD+R to burn now. For some reason it cannot read dvd-r's.

My Pioneer DVD-RW recently hasn't been able to burn. Well it does burn, after awhile, it does not burn successfully due to the error as follows:


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <PIONEER DVD-RW DVR-107D>Version: 1.22 - HA 1 TA 1 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00GVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L060AVER07-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-107D atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MG7356P SED643K 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : MG7356P SED643K 1.0 dtscsi Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
JLMS DVD-ROM LTD-166S E: CDRom0
PIONEER DVD-RW DVR-107D F: CDRom1
MG7356P SED643K H: CDRom2
MG7356P SED643K I: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 140MB (144132kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

24.3.2006
NeroAPI
5:45:20 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

5:45:20 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

5:45:20 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

5:45:20 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

5:45:20 PM #5 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-107D running

5:45:20 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

5:45:21 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

5:45:21 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

5:45:21 PM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media

5:45:21 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285977 (507:59.52, 4464MB)

5:45:21 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO

5:45:21 PM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-107D, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

5:45:21 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:45:21 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVD-RW DVR-107D]
--------------------------------------------------------------

5:45:21 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [PIONEER DVD-RW DVR-107D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 387022848, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

5:45:21 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

5:45:21 PM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

5:45:21 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

5:45:21 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)

5:45:21 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:45:21 PM #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

5:45:21 PM #22 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON

5:45:21 PM #23 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes

5:45:21 PM #24 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:45:24 PM #25 Text 0 File Cdrdrv.cpp, Line 1282
17:45:24.734 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #26 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.156 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #27 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.203 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #28 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.250 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #29 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.312 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #30 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.359 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #31 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.406 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #32 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.468 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #33 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.515 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #34 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.562 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #35 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.625 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #36 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.671 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #37 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.718 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #38 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.828 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #39 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.890 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #40 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.937 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:03 PM #41 Text 0 File Cdrdrv.cpp, Line 1282
17:46:03.984 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #42 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.031 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #43 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.156 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #44 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.203 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #45 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.265 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #46 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.312 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #47 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.359 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #48 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.421 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #49 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.468 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #50 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.515 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #51 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.578 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #52 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.625 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #53 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.671 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #54 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.750 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #55 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.796 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #56 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.843 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #57 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.890 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:04 PM #58 Text 0 File Cdrdrv.cpp, Line 1282
17:46:04.953 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #59 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.000 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #60 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.062 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #61 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.109 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #62 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.156 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #63 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.218 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #64 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.265 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #65 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.312 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #66 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.390 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #67 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.437 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #68 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.484 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #69 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.546 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #70 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.593 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #71 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.640 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #72 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.703 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #73 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.750 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #74 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.796 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #75 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.859 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #76 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.906 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:05 PM #77 Text 0 File Cdrdrv.cpp, Line 1282
17:46:05.953 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #78 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.093 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #79 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.140 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #80 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.187 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #81 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.250 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #82 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.296 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #83 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.390 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #84 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.437 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #85 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.484 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #86 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.546 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #87 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.593 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #88 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.718 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #89 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.765 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #90 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.828 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #91 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.875 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:06 PM #92 Text 0 File Cdrdrv.cpp, Line 1282
17:46:06.921 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #93 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.000 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #94 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.046 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #95 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.109 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #96 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.156 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #97 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.203 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #98 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.328 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #99 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.390 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #100 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.437 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #101 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.484 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #102 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.531 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #103 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.656 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #104 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.703 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #105 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.765 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #106 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.812 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #107 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.859 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:07 PM #108 Text 0 File Cdrdrv.cpp, Line 1282
17:46:07.968 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #109 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.031 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #110 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.078 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #111 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.125 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #112 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.171 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #113 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.281 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #114 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.328 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #115 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.375 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #116 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.437 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #117 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.484 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #118 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.593 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #119 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.640 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #120 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.703 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #121 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.750 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #122 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.796 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #123 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.921 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:46:08 PM #124 Text 0 File Cdrdrv.cpp, Line 1282
17:46:08.968 - PIONEER DVD-RW DVR-107D\H1 T1 : Queue again later

5:47:40 PM #125 SCSI -1106 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00B90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x05 0x03 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03

5:47:40 PM #126 CDR -1106 File Writer.cpp, Line 311
Power calibration error

5:47:40 PM #127 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:47:40 PM #128 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

5:47:41 PM #129 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 328479

5:47:41 PM #130 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)

5:47:41 PM #131 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

5:47:41 PM #132 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/14/2005 5:32:29 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Please any help will be most appreciative! Thanks!

HEY FIRST OFF I HOPE YOUR USING ANY DVD WHEN YOU BREAK THE MOVIE DOWN BUT ALSO WHEN USING DVD Shrink YOU HAVE TO CHANGE OUTPUT TO 4300 AND THE GO UNDER STREAM DATA AND CLICK THE EMPTY BOX . BUT ALSO YOU NEED TO UNINSTALL HARDWARE AND REINSTALL FIRST THING THEN USE AnyDVD WITH IT RUNNING IN THE BACKGROUND THEN USE DVD Decrypter THEN USE DVD Shrink AND FINALLY USE DVD FAB TO BURN WITH NEVER NO PROBLEMS BUT IT SOUNDS LIKE YOUR SOFTWARE CORRUPT TRY THIS IF IT DOESNT WORK HOLLAR BACK TO BLUEDRAGON WE WILL FIND YOU THE FIX.

v0rtex123,
You went from Nero 6 to Nero 7 and now back to Nero 6 . Nero 6 needs to be updated to version 6.6.0.18 and no more as version 6.6.1.4. is buggy.

SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00B90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Your burner does not like that brand of disk as it gets a calibration error next:

5:47:40 PM #126 CDR -1106 File Writer.cpp, Line 311
Power calibration error

Evidentially for that brand of blank media Pioneer has not written a firmware update for your burner. I really doubt they will. If you are in the US try Verbatim

v0rtex123
If your going to use nero6, I recommend you use version 6.6.0.18 instead, it's stable and works with shrink autoburn option.

Uninstall nero from your system using the general cleantool found here:
http://ww2.nero.com/nero6/enu/General_CleanTool.html

Install version 6.6.0.18 packages 1 and 2 form here:

Package 1
http://httpdl1.usw.nero.com/Nero-6.6.0.18_no_yt.exe

Package 2
http://httpdl1.usw.nero.com/NVE-3.1.0.21_no_yt.exe

Now according to your last log
Here:
Recorder: PIONEER DVD-RW DVR-107D, Media type: DVD-R
Disc Manufacturer: SONY08 - D1

I see you're using Sony DVD-R media (didn't you state you were going to use +R media above), the -R brand is made in Taiwan, so there may be some quality concerns there. Your burner is unable to properly recognize the media and apply a correct write strategy as indicated here;

Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


I would recommend you try Sony DVD+R media instead, the +R brand is manufactured in Japan and is considered to be of very good quality, it's all I use and have had very good results with it.

I also see that there is a "Power calibration error" displayed in the log, I believe once the burner correctly recognizes the disks you're using, this should go away.

Slow your write speed down to 4x until you're burning on a consistant basis.

I have been using the Sony brand DVD-R for quite some time. All of a sudden...DVD Shrink starts to give me these errors. I have updated my Nero, but still wouldn't complete the burning process. I have tried using the Sony DVD+R, same problem. Think it's time to buy a new DVD burner??? One thing I noticed is that I was able to burn newer movies...but the older movies i wasn't able to. Weird! I'll try to reinstall the DVD Shrink and see what happends from there...

What I had also noticed is that the media i'm using is 2.0 compared to the ones I had before were version 2.1. Could that possibly be why?

If you're referring to the basic format specifications versions (ver 1.2 or 2.0), this I believe has nothing to do with your problem. Your drive is just not doing well with correctly recognizing the media and applying a correct write strategy, you could try the verbatims as suggested by Car.Mike, I would also checkout the drives manufacturers website to see if they provide a list of tested media for that drive.

http://www.nec.com/

You can also e-mail tech support
mailto:oem.storage@necsam.com