Lads need the master Reset code for Eurovox Max red box....

Cheers

for chorus in ashbourne use 6.875 and perform a full
scan.
Let me know how you get on.

Originally posted by NEDSER:

---

Des ,when on the main menu page , go to CONFIG and down to CLEAR DATA (OK), then press OK , then (OK) to ERASE ALL CHANNELS, wait till this is done and then press EXIT, then back on main menu go to USER INSTALATION (OK) then press Yellow button to do a POWERSCAN , go down to Symbol Rate and change it to 6.887,go back up to mode and change it from NORMAL to FULL (scroll over on remote), and press OK and wait for channels to scan in.. hope this helps...

---

nedser thanks for that
got 51 channels ,but

if its done correctly you should have approx 135-140 channels depending on your cable provider, try repeating the scan a few times and see how you get on..

Originally posted by NEDSER:

---

if its done correctly you should have approx 135-140 channels depending on your cable provider, try repeating the scan a few times and see how you get on..

---

nedser thanks for your help
done another scan<lost everything>
the box thats working 06. symbol rate is 6.952,tryed that-nothing.
had enough for tonight!but thanks anywho

Please help!!! I bought three eurovox max 2006 last week and one by one theyve totally died, i put the 'blue_box_01_06_07' file on, they all worked fine then they got and error after a few hours saying 'your box has detected an error please do not attempt to fix it yourself and return to your vendor' then it dies completly, no lights at all!

Hope someone can help :(

Des the symbol rate i use in Waterford is 6.887 it may vary around the country try both and see...

I can't they're totally dead, no lights at all when you try and power it up. :(

Sorry Tracy that was meant for des61. To be honest i think you were sold two dodgy boxes i'd get straight on to whoever you got them from and demand they sort you out, i've never come across that before..

Hey guys, i've updated my Starview box with the new codes and it's working fine. I'm having a problem with the eurovox 2006 box though. I'm aware that they're supposed to auto-update, but nothing seems to be changing. I still have a random few channels working correctly. I was just curious as to whether or not the codes can be inputed manually or not?

Oh yeah, i'm using n*l and i'm in dublin.

appreciate the help!

****EDIT: Found it afterall, slapped in the codes and it works a treat. cheers.

hi can anyone tell how to get channels in a/z order got 2007 today

Hi NEDSER
Still struggling to get good reception on certain channels I've tried repeates scans but no joy, got any other ideas advice living just outside dublin, previously had proper digital on same line so the signal should be strong enough.

Hi Witko if ur trying to sort channels press MENU go to CHANNELS and on CHANNEL MANAGER press ok then press the RED BUTTON(SORT} then RED again {NAME} then OK and should be grand..

Originally posted by WITKO:

---

hi can anyone tell how to get channels in a/z order got 2007 today

---

if you just press tv you can see your list of channels, there is an option to press the red button for a to z order, do you know you can go in to menu, channels, set favourites and arrange all your channels by type there is a sports favs. a news favs. etc.

Originally posted by robjimi:

---

Hi NEDSER
Still struggling to get good reception on certain channels I've tried repeates scans but no joy, got any other ideas advice living just outside dublin, previously had proper digital on same line so the signal should be strong enough.

---

Sorry robjimi all i did was to keep doing a Powerscan and it worked for me.. is your symbol rate on 6.887?

can anyone tell me does`box work on old fashioned ariel friend lives in the middle of no were cant get anty nell or ch..rs

Yes it does work on normal ariel and you will get 4 basic channels. Better to plug ariel st8 into Tv then eurovox.

can anyone help me out i have the eurovox max.i got it a few weeks ago programed it and pluged it in and after a couple of mins of it saying code being updated it came on but i havnt had it connected for a while and while i had it disconnected they changed the codes and now when i plug it in it says codes being updated but nothing happens its bein like that for half an hour now and nothing.i hav it connected properly and my mate has the same problem with his any ideas..

That happens on my box all the time.
Just leave it on the channel its on and let it do its thing.
It will come back on, mine always does, it took a full hour one time.
Let me know how you get on.

Does anyone know how to get widescreen signal on eurovox 2006 box?

hi i accidently restored factory settings while attempting to erase all channels before doing a powerscan, now i'm only receiving 50 channels instead of about 130. Can anyone help?

Hi mate you need to do AUTO SCAN not powerscan also you will need frequencies for the channels which wont come up after auto scan. Tell us who you cable provider is and what channels you are not getting. i will then tell you how to sort it out.

Hi Cablemtk my cable provider is ntl in dublin, can't get the channals:
filmfour,mtv,mtv base,mtv dance,mtv 2,mtv flux,vh1,vh1 classic,the hits, bubble,history, rte 1&2,tv3,tg4,bbc3&4,ch6,E4,more4,living tv,
paramount comedy,hallmark, abc1, biography, sky sports 1,2,3&news, setanta 1,2&golf, euronews,cnn.
Thats most of them. The frequencies of the channels i have range from 300MHz to 396Mhz. i'm not sure what the frequencies of the channels i dont have are.

Originally posted by robjimi:

---

Hi Cablemtk my cable provider is ntl in dublin, can't get the channals:
filmfour,mtv,mtv base,mtv dance,mtv 2,mtv flux,vh1,vh1 classic,the hits, bubble,history, rte 1&2,tv3,tg4,bbc3&4,ch6,E4,more4,living tv,
paramount comedy,hallmark, abc1, biography, sky sports 1,2,3&news, setanta 1,2&golf, euronews,cnn.
Thats most of them. The frequencies of the channels i have range from 300MHz to 396Mhz. i'm not sure what the frequencies of the channels i dont have are.

---

Ok mate here are the frequencies you need.

675000
795000
818250
811000

To add frequencies go to MENU
Go to Installation
User Installation
Enter PIN (0000)
now Press Corresponding colour button for CH EDIT
Now Press corresponding Coulour Button for ADD
Then Add the above detail into box which says frequency
ONE BY ONE
Symbol Rate will be 6887
After adding freq and symbol rate press OK to save
do that for all frequencies
Once finished
Do AUTO SCAN Again and you should get all the channels.

Let me know the outcome.

This didn't work unfortuneatly, still the same outcome as before