afterdawn.com > forums > software specific discussion > dvd shrink forum > golden compass
Golden compass
abon
Junior Member
5. May 2008 @ 01:04 Link to this message
I sure did. I put it on my comp from Decrypter and ran it through the fixvts and then opened it up to reauthor it using dvd shrink like it said. I cut off the opening and ending credits and Im still around 5500mb. The Golden Compass was like 6188 to start or something.
AfterDawn Addict
5. May 2008 @ 01:18 Link to this message
so after you ripped with
dvdfab decrypter you ran the file though
fixvts then you transcoded with
dvd shrink right? and the file is still to big?
have you tryed just doing the movie only? don't do the extras,preveiws etc
Antec Nine Hundred Mid-Tower Case/Thermaltake 750-Watt PS/ASUS RAMPAGE FORMULA 775 Intel X48 Mobo/Seagate Barracuda 250GB 32MB Cache Sata HDD(primary)/Seagate Barracude 160GB Sata(slave)/NVIDIA GeForce 7950 GX2,1 GB of GDDR3 Memory /CORSAIR Dominator 2GB (2x1GB) DDR2 4 GIGS /Intel Core 2 duo E8400 3.0ghz,6mb cache,OC(ed)to 4GHz on air/Thermalright Ultra-120 CPU Cooling/3-Plextor PX-810SA Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time This message has been edited since posting. Last time this message was edited on 5. May 2008 @ 01:34
abon
Junior Member
5. May 2008 @ 01:50 Link to this message
Thats what Im doing, the movie only. The movie only is 5888 and I took everything off that I didnt need and its down to like 5300.
AfterDawn Addict
5. May 2008 @ 01:56 Link to this message
well
dvdfab decrypter must not be getting the file clean or
dvd shrink would work correctly
have you tryed setting a custom ratio in
dvd shrink? to get it to work
i used dvdfab decrypter doing the movie only and got a correct file. you are ripping the movie only in dvdfab decrypter right?
Antec Nine Hundred Mid-Tower Case/Thermaltake 750-Watt PS/ASUS RAMPAGE FORMULA 775 Intel X48 Mobo/Seagate Barracuda 250GB 32MB Cache Sata HDD(primary)/Seagate Barracude 160GB Sata(slave)/NVIDIA GeForce 7950 GX2,1 GB of GDDR3 Memory /CORSAIR Dominator 2GB (2x1GB) DDR2 4 GIGS /Intel Core 2 duo E8400 3.0ghz,6mb cache,OC(ed)to 4GHz on air/Thermalright Ultra-120 CPU Cooling/3-Plextor PX-810SA Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time This message has been edited since posting. Last time this message was edited on 5. May 2008 @ 01:59
abon
Junior Member
5. May 2008 @ 03:01 Link to this message
Yes Im doing the movie only. Im going to go and do it all over again now.
Senior Member
5. May 2008 @ 03:19 Link to this message
Originally posted by abon: Now it's time to compress.
Senior Member
1 product review
5. May 2008 @ 08:08 Link to this message
Run through Deep Analysis before you hit Backup! And you should be fine.
cdan
Junior Member
5. May 2008 @ 09:39 Link to this message
I don't know if you're aware of it..but you can manually get a higher
compression rate with
dvd shrink by doing a 'custom' compression on the menu and extras. Also, be sure to uncheck any audio files you don't need, and/or try doing 'movie only'.
cdan
Advertisement
jimcreedx
Junior Member
13. May 2008 @ 12:25 Link to this message
dvdfab riped it for me then i burned the iso file w/ shrink and burned w/ imagburn did the trick. give that a try
afterdawn.com > forums > software specific discussion > dvd shrink forum > golden compass
