DBOX IRELAND alternative

Its one ROM 7 file but with three bins you will see them in var/k*ys. Take this and use it http://www.mediafire.com/?tgzjznmmz2m it has a text file attached that will briefly explain where to put it.

 

roger.thanks

 

where do i put the services/bouqets,went thru every folder but cant find anything same/similiar to overwrite with..

 

Have you looked here? var/tuxbox/config/zapit

 

channels are in decent order,still black scren and no epg.
i deleted roms 10 and 11 and left only one 7 rom,there was three,should i replace them,made a backup this time round,

 

Have you done as above? BTW you do know that later images dont have an emu either. You need them too.

Are you using a 2x or 1x image?

 

replaced complete set of roms,disabled 10 and 11 via menu.set my location to dublin,default frequency off 363000,did different scans bf,best uk,still no epg and black screen.

 

I have edited my reply above ^^^^

 

didnt flash image,couldnt do that either,but its original image that was previously working till it went down.
commando v9.00.
unsure weather its x1 or x2

 

Use this to check if you have a 1x or 2x, presume its a Sagem?

Flashcheck

 

had just downloaded that and flashtool from your filesharing thingy,my next option might be new image.if thats my last resort what image you advise,i think im pissing against the wind with the roms,done everything by the book so to speak

 

Dont worry I am going somewhere with this but I do need to know if its a 1x or 2x Sagem as I dont what to have you with a box in Kein system. Although easy enough to recover from.

If you use flashcheck it will tell you how many ICs you have. Then I can help you

 

went to apply flashcheck,how does it execute,getting an error

 

OK probably easier to ask this.Did you get the Commando image from Eamos and if so which one was it?

 

came on box when i purchased it,

 

not much help.sorry

 

whipped cover off,i see 2 intel chips.just below right of the tuner

 

Cheers. OK download this image here it is set up for Dublin.

You will still need to FTP over the new ROM file I gave you to your zapit folder as said earlier. Then reboot the box and put it on Sly 2 for a minute or two.

Bit of work but it will work, unless you have more problems than I thought.

 

success,well sort off,just got your last post few seconds ago,read thru your beginners guide and loaded lincsat x2 into temp.flashed thru dbox and worked.did a scan and got all channels.thank f*ck,went to ftp for the new rom,bouquet and services but dont know password to connect,tried the usual..dbox..dbox2..,username ..root...made sure my ip was same on my adaptor and configured same on network on dbox,but not getting connection,but on a good note i have something to keep the kids occupied with on tv over xmas.one less noob now to worry about.

 

Hi Scouser, hope you don't mind me jumping in on this thread, have downloaded new roms, unzipped them and FTPd them to the Commando Image, rebooted the dbox, and put it onto Sky2, left it there for a while, changed channels and BINGO!!!

Excellent work, once again a big thanks!