All, I have a MEMOREX DVD+/-DLRWL1 F16 burner with Nero 7 and cannot get my Sony DVD-R's (version 2.1) to burn. The log file output is below. I have the latest firmware available for the drive. I had the same problem with version 6.6 of Nero as well. Any insight would be appreciated. Thanks, --Chris Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.0.0.0 Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SONY CD-RW CRX217E >Version: 1DS1 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : SONY CD-RW CRX217E atapi Port 0 ID 0 DMA: On CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD800JD-00JRA0 atapi Port 1 ID 0 DMA: On DiskPeripheral : WDC WD800JD-00JRA0 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SONY CD-RW CRX217E D: CDRom0 Memorex DVD+/-DLRWL1 F16 E: CDRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1014MB (1038412kB) Free physical memory: 190MB (195052kB) Memory in use : 81 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.2.2006 Burn DVD Image 12:51:35 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 81920KB of Memory 12:51:35 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 12:51:35 AM #3 Text 0 File Writer.cpp, Line 113 Writer E: Memorex DVD+/-DLRWL1 F16 running 12:51:35 AM #4 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 12:51:36 AM #5 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 320143 ( 71:08.43, 625MB) 12:51:36 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 12:51:36 AM #7 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 12:51:36 AM #8 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:51:36 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 320144 (320144) = #320144/71:8.44 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 320144 blocks [E: Memorex DVD+/-DLRWL1 F16] -------------------------------------------------------------- 12:51:36 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [E: Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 655654912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 320144 | lead-out | 1 | 0x41 | 0x00 12:51:36 AM #11 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:51:36 AM #12 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 4x (5,540 KB/s) 12:51:37 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:51:37 AM #14 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode for Multisession 12:51:37 AM #15 Text 0 File MMC.cpp, Line 21541 Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON 12:51:37 AM #16 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 12:51:37 AM #17 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:51:38 AM #18 SPTI -1046 File SCSIPassThrough.cpp, Line 306 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05 Buffer x096f0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12:51:38 AM #19 CDR -1046 File Writer.cpp, Line 302 Illegal disc E: Memorex DVD+/-DLRWL1 F16 12:51:38 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:51:38 AM #21 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:51:38 AM #22 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was -1 12:51:38 AM #23 Phase 133 File dlgbrnst.cpp, Line 1724 Writing short lead-out 12:51:39 AM #24 SPTI -1176 File SCSIPassThrough.cpp, Line 306 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 12:51:39 AM #25 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error E: Memorex DVD+/-DLRWL1 F16 12:51:39 AM #26 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 12:51:39 AM #27 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/10/2005 3:04:10 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[bold]Physical memory : 1014MB (1038412kB) Free physical memory: 190MB (195052kB)[/bold] You are running low on memory. Although you have more than enough, something is using it up.Try not to multitask, close any other programs(anivirus, internet....) [bold]NT-SPTI used Nero Version: 7.0.0.0[/bold] Your Nero is also old.Try and update your nero to 7.1.0.4b. [bold]Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:51:38 AM #18 SPTI -1046 File SCSIPassThrough.cpp, Line 306 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05 Buffer x096f0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12:51:38 AM #19 CDR -1046 File Writer.cpp, Line 302 Illegal disc[/bold] Also, it looks like your driver doesn't like the media. Try using something else, like Verbatims or TYs
