Can burn DVD+R's, but not DVD-R's??

Discussion in 'Nero discussion' started by nhzero, Feb 11, 2006.

Page 1 of 2
  1. nhzero

    nhzero Member

    Joined:
    Feb 11, 2006
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.1.4
    Internal Version: 7, 0, 1, 4

    Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 1 TA 0 - 7.0.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <RS5907R TUV713Y >Version: 1.0 - HA 1 TA 2 - 7.0.1.4
    Adapter driver: <SCSI> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : HDT722516DLA380 atapi Port 2 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 4 ID 0 DMA: On
    CdRomPeripheral : LITE-ON LTR-24102B atapi Port 4 ID 1 DMA: On
    DiskPeripheral : ST3160021A atapi Port 5 ID 0 DMA: On
    CdRomPeripheral : RS5907R TUV713Y 1.0 dtscsi Port 6 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-1633S E: CDRom0
    LITE-ON LTR-24102B F: CDRom1
    RS5907R TUV713Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (522736kB)
    Free physical memory: 88MB (91096kB)
    Memory in use : 82
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.2.2006
    DVD-Copy on the fly
    9:50:21 PM #1 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:50:21 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 72704KB of Memory

    9:50:21 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    9:50:21 PM #4 Text 0 File Writer.cpp, Line 113
    Writer E: LITE-ON DVDRW SOHW-1633S running

    9:50:21 PM #5 Text 0 File DVDCopy.cpp, Line 292
    DVD Track-Information from source disc:
    Media Type: DVD-ROM
    S01 T01 Con 0x04 Start 0 Len 2285872 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    9:50:21 PM #6 Text 0 File DVDCopy.cpp, Line 405
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2285872 = 2285872, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    9:50:21 PM #7 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media

    9:50:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2285871 (507:58.21, 4464MB)

    9:50:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)

    9:50:44 PM #10 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
    Disc Manufacturer: Prodis - cF02
    Disc Application Code: 64, Disc Physical Code: 193

    9:50:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

    9:50:44 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2285872 (2285872) = #2285872/507:58.22
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285872 blocks [E: LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    9:50:44 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681465856, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2285872 | lead-out | 1 | 0x41 | 0x00

    9:50:44 PM #14 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:50:44 PM #15 Phase 36 File dlgbrnst.cpp, Line 1725
    Burn process started at 1x (1,385 KB/s)

    9:50:44 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    9:50:44 PM #17 Text 0 File DVDR.cpp, Line 2580
    Recording mode: Sequential Recording Mode

    9:50:44 PM #18 Text 0 File MMC.cpp, Line 21611
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

    9:50:44 PM #19 Text 0 File DVDR.cpp, Line 2735
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:50:44 PM #20 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:50:47 PM #21 SPTI -1046 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x03bf0000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    9:50:47 PM #22 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    E: LITE-ON DVDRW SOHW-1633S

    9:50:47 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:50:47 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:50:47 PM #25 Text 0 File DVDR.cpp, Line 2978
    EndDAO: Last written address was -1

    9:50:47 PM #26 Phase 38 File dlgbrnst.cpp, Line 1725
    Burn process failed at 1x (1,385 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 10:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 6:30:18 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 9/14/2005 1:17:44 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 1:00:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    I don't understand why I keep getting illegal disk errors on my DVD-R's from Fujitsu, no matter what speed I use....Can anyone help?? Thanks....

    Nate
     
    nhzero, Feb 11, 2006
    #1
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Well I see a few things so try some of these:
    Get this back in dma mode - looks like your using it to read/rip so it may speed things up. Here's a link if needed:
    http://home.comcast.net/~bbmayo/checking DMA.pdf
    Update to the latest firmware. Here's a link:
    http://www.liteonamericas.com/us/download.htm
    Wow! You need to free up some memory! No multi-tasking & shut any unneccessary processes
    Turn this option off - higher chance of errors. Let nero copy to your hd 1st.
    Not the best media - my liteon (not the same model) was not that fond of them. Firmware update may help. Switch to Taiyo Yuden or Verbatim
    Uninstall Roxio - doesn't always play well with nero. Run the zapper also to remove all traces. Here's a link:
    http://microadvantage.net/downloads/zapper60.zip
    Whew! Let's us know how it turns out!!
     
    binkie7, Feb 11, 2006
    #2
  3. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    cyprusrom, Feb 11, 2006
    #3
  4. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @cyprusrom
    Thanks for pointing that out! (no sarcasm) I like to try and stick with the manufacturers website when I can. I just realized that this one is where I usually update my firmware for my litey (probably should have cked my bookmarks 1st!!!):
    http://liteonit.com/ODD/English/e_downloads/e_firmware_dvd rw.asp

    @nhzero
    Use the one cyprusrom gave or the one in this post for the latest one.
     
    binkie7, Feb 11, 2006
    #4
  5. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    No problem binkie! i try to follow your last link, but I can't, "can't find server, page can't be displayed". Does it work for you?
     
    cyprusrom, Feb 11, 2006
    #5
  6. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Last edited: Feb 11, 2006
    binkie7, Feb 11, 2006
    #6
  7. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    LOL!It is snowy, and cold,and dark up here too, but we got through!
    Works just fine now!
    :~)!
     
    cyprusrom, Feb 11, 2006
    #7
  8. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Well my excuse will be I'm just too in awe of the snow :)

    @nhzero
    let's us know how it's turns out! Good,bad or otherwise!
     
    binkie7, Feb 11, 2006
    #8
  9. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    I totally understand:~)! and have all my compassion! About 5 months of snow here!

    @nhzero
    Yes,bad or good, let us know.If is good, so we can spread the good, if it is bad, to search different avenues.
     
    Last edited: Feb 11, 2006
    cyprusrom, Feb 11, 2006
    #9
  10. nhzero

    nhzero Member

    Joined:
    Feb 11, 2006
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    Okay, well, my LITEON SOHW-1633S is a BSG4 model, which is an OEM model that came with my eMachines T6414, so the first two firmwares won't update this drive. The last link just keeps reloading the same page when I click on the SOHW-1633S download link.

    I also used the zapper tool.

    The SCSI drive that you mentioned with DMA off is a Daemon Tools drive, so I'm not sure that DMA will help. This is also why I am not using cache to disk from that drive.

    I tried to kill a bunch of memory eaters as well. So far it hasn't helped. All I can assume is that the media is bad, which SUCKS because DVD's are so expensive in 50-packs, and I got a good deal on these from Best Buy, which I can't return now... Here's the error messages I got after I followed all your advice:


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.4
    Internal Version: 7, 0, 5, 4

    Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 1 TA 0 - 7.0.5.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <RS5907R TUV713Y >Version: 1.0 - HA 1 TA 2 - 7.0.5.4
    Adapter driver: <SCSI> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : HDT722516DLA380 atapi Port 2 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 4 ID 0 DMA: On
    CdRomPeripheral : LITE-ON LTR-24102B atapi Port 4 ID 1 DMA: On
    DiskPeripheral : ST3160021A atapi Port 5 ID 0 DMA: On
    CdRomPeripheral : RS5907R TUV713Y 1.0 dtscsi Port 6 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-1633S E: CDRom0
    LITE-ON LTR-24102B F: CDRom1
    RS5907R TUV713Y G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 510MB (522736kB)
    Free physical memory: 154MB (157724kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.2.2006
    ISO compilation
    3:24:16 PM #1 Text 0 File Isodoc.cpp, Line 6414
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    3:24:16 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 72704KB of Memory

    3:24:16 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    3:24:16 PM #4 Text 0 File Writer.cpp, Line 113
    Writer E: LITE-ON DVDRW SOHW-1633S running

    3:24:16 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    3:24:16 PM #6 Text 0 File Burncd.cpp, Line 3341
    Turn on Disc-At-Once, using DVD media

    3:24:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 288
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2181903 (484:52.03, 4261MB)

    3:24:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    3:24:16 PM #9 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
    Disc Manufacturer: Prodis - cF02
    Disc Application Code: 64, Disc Physical Code: 193

    3:24:16 PM #10 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:24:16 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2181904 (2181904) = #2181904/484:52.4
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2181904 blocks [E: LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    3:24:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4468539392, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2181904 | lead-out | 1 | 0x41 | 0x00

    3:24:16 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    3:24:16 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    3:24:16 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    3:24:16 PM #16 Text 0 File Burncd.cpp, Line 4175
    Cache writing successful.

    3:24:16 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    3:24:16 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 4x (5,540 KB/s)

    3:24:17 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:24:17 PM #20 Text 0 File DVDR.cpp, Line 2699
    Recording mode: Sequential Recording Mode

    3:24:17 PM #21 Text 0 File DVDR.cpp, Line 2855
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:24:17 PM #22 Text 0 File Cdrdrv.cpp, Line 8663
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:24:18 PM #23 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x054f0000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    3:24:18 PM #24 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    E: LITE-ON DVDRW SOHW-1633S

    3:24:18 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    3:24:19 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    3:24:19 PM #27 Text 0 File DVDR.cpp, Line 3095
    EndDAO: Last written address was -1

    3:24:19 PM #28 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 10:07:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 9/14/2005 1:17:44 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 1:00:00 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    nhzero, Feb 12, 2006
    #10
  11. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    Good media doesn't have to be xpensive. Best buy has frequent sales, ad you can buy a 50pk of Vebatims or Fuji MIJ for like $15
     
    cyprusrom, Feb 12, 2006
    #11
  12. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @nhzero
    That is annoying on liteon's page!
    Here's another site:
    http://forum.rpc1.org/dl_firmware.php?download_id=1934
    This may help w/ the prodisc but again my experience w/ prodisc and a liteon sohw832 was hit ot miss.
    As cyprusrom the good stuff doesn't have to be expensive - sales every week - best buy, staples, office depot etc. Check out the media forum - usually every week there's a thread on what's on sale & where.
    @cyprusrom
    1st big snow here - over a foot. I don't think I could handle 5 months of it!
     
    binkie7, Feb 12, 2006
    #12
  13. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    Hah!
    binkie,
    I've had over a foot of snow for more than a month! It could last another month,or another 3!
    Keep warm, little dolphin!
     
    cyprusrom, Feb 12, 2006
    #13
  14. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @cyprusrom
    Turning on the fireplace as we speak!!

    @nhzero
    Try the firmware udpate in the new link. let us know how it turns out!

    editted to correct names!!
     
    Last edited: Feb 12, 2006
    binkie7, Feb 12, 2006
    #14
  15. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    binkie
    i think the second message wasn't for me! better turn the heat up in the fireplace!

    Unfortunaley, I don't have that option:~(! I am just happy my landlord fixed the furnace yesterday! I gotta go and see if my car starts or needs a jump,so I can go to school and work tomorrow! Freezing outside!
     
    cyprusrom, Feb 12, 2006
    #15
  16. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    @binkie
    I see you needed some help in another thread!
    Gwen got to you first, here is another one:

    ftp://ftp.ahead.de/software/nero7/Nero-7.0.1.4b_eng_no_yt.exe

    If is not hyperlinked, copy/paste in the browser should work.

     
    Last edited: Feb 12, 2006
    cyprusrom, Feb 12, 2006
    #16
  17. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @cyprusrom
    Tks for the help again! Not only am I queen of the typos - the ole copy and paste sometimes fails me :) Nah it's just that cold freezing my brain - lol
     
    binkie7, Feb 12, 2006
    #17
  18. cyprusrom

    cyprusrom Active member

    Joined:
    Jan 5, 2006
    Messages:
    5,439
    Likes Received:
    1
    Trophy Points:
    96
    binkie,
    The fireplace should help!
    Is it wood or propane? I hope you don't have to get outside to bring wood in, your lill' fins might freeze!
    P.S And my spelling is worse than it was in highschool! I'll blame it on the cold also!
     
    Last edited: Feb 12, 2006
    cyprusrom, Feb 12, 2006
    #18
  19. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @cyprusrom
    Gas - the best - just flick the switch on!

    best to get back to topic now!
    @nhzero
    Also check you aspi in nero tool kit>info tool under the aspi tab.
     
    binkie7, Feb 12, 2006
    #19
  20. shine33

    shine33 Member

    Joined:
    Dec 17, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    edited by ddp
     
    Last edited: Feb 12, 2006
    shine33, Feb 12, 2006
    #20
Page 1 of 2

Share This Page